REPAIR/MAINTENANCE OF COOLING/WINTER APPLIANCES, AC,RO PLANTS,CSTP AND MISCELLANEOUS ITEMS AT AFS SAMANA UNDER GE (AF) JAMNAGAR NO.1

Amount

Taking down carefully ceiling fan / wall mounted fan/exhaust fan by disconnecting electric connection for repairing such as rewinding, replacement of defective spare part, over hauling etc as required and re-fixing in the same position after carry out the repairs works, and connecting complete all as specified and directed by Engr-in-Charge. Note:- (i) Repairing such as rewinding, replacement of defective spare part, connecting wire etc will be measured & paid separately as supply & fix in repair. (ii) Overhauling and painting will be measured and paid separately. (iii) Replacement of nut, bolt ,washer, split pin and rubber seal for the down rod of ceiling fan if found defective will be measured and paid separately as supply only.

M & L for rewinding of ceiling fan 1200 mm sweep of any make by dismantling the ceiling fan, removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as specified and directed by Engr-in-Charge. Replacement of bearing and capacitor paid separately as supply only.

M & L for rewinding of wall mounted fan 450 mm sweep of any make by dismantling the fan, removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enamelled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as directed by the Engineer-in-Charge. Replacement of bearing and capacitor paid separately as supply only.

All as item No 3 above but exhaust fan 300 mm sweep. Replacement of bearing and capacitor, arms set paid separately as supply only.

All as item No 3 above but exhaust fan 450 mm sweep. Replacement of bearing and capacitor ,arms set paid separately as supply only.

Supply & fix in repair only MS clamp with MS nuts, bolts, rubber bush, quarter pin complete for the down rod of ceiling fan.

Supply and fix in repair ball bearing suitable for ceiling fan of any type and make complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair capacitor of 2.5 mfd capacity for ceiling fan of any sweep including removing old one.

Supply and fix in repair Capacitor of 4/3.15 mfd capacity for exhaust fan on any sweep including removing old one

supply and fix in repair ball bearing for exhaust fan of capacity 300 mm exhaust fan

supply and fix in repair ball bearing for exhaust fan of capacity 450 mm exhaust fan

supply and fix in repair stepped type electronic fan regulator 240 V ,50 Hz supply

Supply and fix only arm set for 300 mm sweep metal body exhaust fan heavy duty. (set comprises of 4 nos separate arm)

Supply and fix only arm set for 450 mm sweep metal exhaust fan heavy duty (set comprises of 4 nos separate arm)

Supply and connection in repair PVC insulated, PVC sheathed three core copper conductor cable multi stranded of size 0.5 Sqmm for connecting of fan from ceiling rose complete all as specified and directed by Engr-in-Charge.

Comprehensive / Preventive maintenance / servicing of split AC up to 2.0 ton capacity of any make, maintenance carried out by cleaning of cooling and condenser coil of indoor and outdoor units with descaling solution, checking of refrigerant pressure and charging of refrigerant gas including testing / checking the serviceability of spares such as starting capacitor, running capacitor, fan motor, blower motor relays, thermostat, & wiring etc and servicing complete of indoor and outdoor units complete all as specified and directed by Engr-in-Charge. Note:- (i) Spares such as starting capacitor, running capacitor, fan motor, blower motor relays, thermostat, & wiring etc if found defective will be measured & paid separately as supply & fix in repairs.

(ii) Charging of gas if required will be measured and paid separately as supply & topping of gas. (iii) Replacement of compressor wherever required will be measured and paid separately.

Material & labour for recharging of F-134 A gas to split type air conditioner of capacity 1.5 / 2.0 TR after flushing the complete system, vacuum testing and the repairing the leaking tube / lines by brazing, charging the unit as per manufacturer instruction complete.

Material & labour for recharging of F-134 A gas to refrigerator of capacity 300 / 310 ltrs after flushing the complete system, vacuum testing and the repairing the leaking tube / lines by brazing, charging the unit as per manufacturer instruction complete all as specified and directed by Engr-in-Charge.

Material & labour for recharging of F-134 A gas to water cooler of storage capacity 80 ltrs & cooling capacity 40 ltrs after flushing the complete system, vacuum testing up to 24 hours and the repairing the leaking tube / lines by brazing, charging the unit as per manufacturer instruction complete all as specified and directed by Engr-in-Charge.

Material & labour for recharging of F-134 A gas to water cooler of storage capacity 150 ltrs & cooling capacity 120 ltrs after flushing the complete system, vacuum testing up to 24 hours and the repairing the leaking tube / lines by brazing, charging the unit as per manufacturer instruction complete all as specified and directed by Engr-in-Charge.

Dismantling blower fan motor of split AC 1.5 / 2 TR and supply and fixing new fan motor in repair along with fan of existing make and size and refixing in position, connecting and testing on load complete all as specified and directed by Engr-in-Charge.

Dismantling blower fan motor of 80/40 and 120/150 ltrs water cooler and supply and fixing new fan motor in repair along with fan of existing make and size and refixing in position, connecting and testing on load complete all as specified and directed by Engr-in-Charge.

S&F in repair Over load Protector suitable for window type AC of capacity 1.5 Ton complete all as specified and directed by Engr-in-Charge.

S&F in repair starting capacitor 80 to 100 MFD suitable for window type AC / Split AC 1.5 TR complete all as specified and directed by Engr-in-Charge. Make Keil, Keltron,Epcon

S&F in repair running capacitor 36 MFD suitable for window type / Split AC 1.5 / 2.0 Ton all as specified and directed by Engineer-in-charge.

S&F in repair starting relay suitable for water cooler of any capacity all as specified and directed by Engineer-in-charge.

S&F in repair thermostat switch suitable for refrigerator of capacity 165 / 300 Ltrs all as specified and directed by Engineer-in-charge.

S&F in repair contactor relay suitable for split type air conditioner of capacity 1.5 /2 TR capacity all as specified and directed by Engineer-in-charge.

S&F in repairs PCB suitable for split type AC 1.5/2 ton capacity of Make LG / Carrier / Voltas / Blue Star along with necessary electrical connections including spare parts etc. all as specified and directed by Engineer-in-charge.

S&F in repairs replacement of PCB for indoor unit suitable for inverter type split type AC 1.5/2 ton capacity of Make LG / Carrier / Voltas / Blue Star along with necessary electrical connections including spare parts etc. all as specified and directed by Engineer-in-charge.

S&F in repairs replacement of PCB for outdoor unit suitable for inverter type split type AC 1.5/2 ton capacity of Make LG / Carrier / Voltas / Blue Star along with necessary electrical connections including spare parts etc. all as specified and directed by Engineer-in-charge.

S&F in repair cooling effect transmitting motor suitable for refrigerator 310 Ltrs capacity all as specified and directed by Engineer-in-charge.

M&L for Repairs to internal remote assembly corded / cordless of split type AC 1.5 / 2.0 ton capacity by replacing the PCB, LED, indicators and necessary soldering including replacement of flexible cord of suitable size / length complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair PVC flexible pipe of 15 mm dia suitable for Split AC out let of water drain pipe as per sample complete all as specified and directed by Engr-in-Charge.

Supply and fix outdoor unit condensing coil (copper material) whole assembly suitable for 2 TR split AC along with standard accessories, fitting, fixture including fixed in position as per standard practice and dismantling / taking down complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs brass service valve of size 3/8" suitable for split ACs of any capacity.

Supply and fix in repairs brass service valve of size 5/8" suitable for split ACs of any capacity.

Supply and fix in repair insulation on copper pipe of split AC of size 1/4 inch internal diameter and thickness 6mm.

Supply and fix in repair insulation on copper pipe of split AC of size 1/2 inch internal diameter and thickness 6mm.

Supply and fix in repair cupromet copper tube ASTM B68 of size 1/4 inch x 0.48 mm.

Supply and fix in repair cupromet copper tube ASTM B68 of size 1/2 inch x 0.48 mm.

Supply and fix in repair PVC insulated and PVC sheathed 3 core with multi stranded flexible copper cable of size 2.5 sqmm including connecting complete for desert cooler.

Supply and fix in repair PVC float valve with complete set of rod and ball of 15 mm size for water cooler of any capacity.

Supply and fix in repairs stainless steel drain water tray of water coolers of any capacity of existing size by suitable size of screws nut and bolts.

Supply and fix in repair Heating element any type (i.e; Cup thread or triangular) of capacity 2 KW, 220/230 Volts ISI marked,incluiding Its thermostate and relay fixed to electric geyser of any capacity. Note: sample of heating element is provided by office of Engr-in-charge.

Supply and fix in repair Hot water connection (2 nos) brass chromium plated, with brass chromium plated hexagonal adaptor, 450 mm long complete with rubber washer, ISI marked complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair electric geyser element apparatus for 25/50 ltrs geyser. Note: sample of apparatus is provided by office of Engr-in-charge

Supply and fix in repair Plug top 3 pin 15 Amps, polycarbonate body, ISI marked & connecting complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair inner container with its outer glasswoll insulation material of 25/50 ltrs capacity electric geyser, testing for leakage & fixed in position complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair base plate for electric geyser 25/50 Ltrs .

M&L for repair of Voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with out put voltage stabilized at 230V with accuracy of ±2.5% and of capacity upto 5 KVA complete with its connection.

S & F in repair metal clad plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket complete with 20 Amp MCB SP, C curve complete all as specified and directed by Engr-in-Charge.

S&F in repair AC 3 metal clad top use for AC point wiring box.

M&L for taking out unserviceable compressor sealed unit of 1.5 ton capacity from the split type AC (Make - Carrier / LG / Blue Star / Voltas / Shriram), single phase 230 Volts, and replacing the same with new compressor sealed unit fixing & connecting the same including vacumization, pressure testing leakage rectification and supply and charging refrigerant gas and testing complete all as specified and directed by Engr-in-Charge. Note: Unserviceable old retrieved compressor shall be replace with the same authorized dealer / company manufacture.

M&L for taking out unserviceable compressor sealed unit of 2 ton capacity from the split type AC (make - Carrier / LG / Blue Star / Voltas / Shriram), single phase 230 Volts, and replacing the same with new compressor sealed unit fixing & connecting the same including vacumization, pressure testing leakage rectification and supply and charging refrigerant gas and testing complete all as specified and directed by Engr-in-Charge. Note:-Unserviceable old retrieved compressor shall be replace with the same authorized dealer / company manufacture.

Supply & fix in repair Level Switch . Make:-Pune Techtrol / TRAC / Asterall

Supply& fix in repair only V Belt B-52 Make:-Continental or Equivalent make approved by the GE

Supply & fix in repair only Star Coupling L-95 for Centrifugal sewage pump. Make: Birma Nylon or Equivalent make approved by the GE

Supply& fix in repair only Lovejoy Coupling SW-95. Make:-Rathi / Birma Nylon or Equivalent make approved by the GE

S&F in repair only grob Air Filter for Air suction Blower as per sample kept in GE's Office

Supply and fix in repair flat three core PVC insulated & PVC sheathed industrial copper cable for submersible motor of size 16 Sqmm complete all as specified and directed by Engr-in-Charge.

M&L in repair Servicing of motor and pump of capacity 10.2 HP three phase monoblock non clog type submersible motor, of sewage Lift well , & rewinding of motor with super enamelled copper wire of existing size including greasing and coupling with motor and testing and replacement of ball bearing set,impellar of pump,shaft,bush complete required at drive end and fixed the motor at its place with connection discharge pipe complete all as specified and directed by Engr-in-Charge.

M&L in repair Servicing of motor and pump of capacity 20 HP three phase monoblock non clog type submersible motor of sewage shallow well , & rewinding of motor with super enamelled copper wire of existing size including greasing and coupling with motor and testing and replacement of ball bearing set,impellar of pump,shaft,bush complete required at drive end and fixed the motor at its place with connection discharge pipe complete all as specified and directed by Engr-in-Charge.

M&L in repair Servicing of motor and pump of capacity 10.2 HP three phase Induction centrifugal type motor of CSTP, & rewinding of motor with super enamelled copper wire of existing size including greasing and coupling with motor and testing and replacement of ball bearing set,impellar of pump,shaft,bush complete required at drive end and fixed the motor at its place with connection discharge pipe complete all as specified and directed by Engr-in-Charge.

M&L in repair Servicing of motor and pump of capacity 12.5 HP three phase Induction centrifugal type motor of CSTP compressor, & rewinding of motor with super enamelled copper wire of existing size including greasing and coupling with motor and testing and replacement of ball bearing set,impellar of pump,shaft,bush complete required at drive end and fixed the motor at its place with connection discharge pipe complete all as specified and directed by Engr-in-Charge.

M&L in repair Servicing of motor and pump of capacity 5 HP single phase induction motor, of CSTP plant for feeding to dual media filter , & rewinding of motor with super enamelled copper wire of existing size including greasing and coupling with motor and testing and replacement of ball bearing set,impellar of pump,shaft,bush complete required at drive end complete all as specified and directed by Engr-in-Charge.

M&L in repair Servicing of motor and pump of capacity 2.2 HP single phase induction non clog type motor, of CSTP plant , & rewinding of motor with super enamelled copper wire of existing size including greasing and coupling with motor and testing and replacement of ball bearing set,impellar of pump,shaft,bush complete required at drive end complete all as specified and directed by Engr-in-Charge.

M&L in repair for servicing of twin lobe air cooled compressor by dismantling all of its internal parts along with its driving motor of capacity 10 HP make USHA of air delivery capacity 350 m^3/hrs and discharge pressure 6.5 kg/cm^2,motor speed 1450 RPM of discharge pressure 4000 mm water column with change of its bearing and shaft , all gaskit sealing ,all O ring, oil seal, pressure ring, oil drain plug grinding of gears wheels, lobe and arrange again in its position with it with gear.Repalcement of gear oil paid separately complete all as specified and directed by Engr-in-Charge.

M&L for gear oil suitable for USHA twin lobe air cooled compressor of grade ENKLO 320 or equivalent .

M&L for lubrication oil of grade SAE 10.

Cleaning of following sewage tank / sump of diameter up to 8 mtrs and depth up to 8 mtr by bailing out completes water removing all the accumulated sediments, sludge and foreign particles etc and depositing at a distance not less than 500 mtrs from the site including scrubbing, brushing and removing all the dirt / sludge accumulated on the walls / floor etc as and when required complete all as specified and directed by Engr-in-Charge. for the following locations:-

(a) CSTP Plant at Helipad comprising of following:- (i) Oil and Grease Trap Chamber (ii) Equalization tank (iii) MBBR-1&2 (iv)Chlorine contact tank (v) Filter feed tank (vi) Treated Water Tank (vii) Sludge Tank (b) Collection Sump Behind OMQ (C) Lift Well in SMQ

Note:- (a) Any type of sludge collected during cleaning shall be removed at least 500 Mtrs away from cleaning place or as directed at site by Eng-in-Charge (b)Safety precautions as per CP norms will be ensured during cleaning of well.

M&L for Servicing of R.O. Plant at AF station Samana of capacity 50 Ltrs / Hrs by circulating citric acid with water to cleaning modules and descaling of system to improve flow and to reduce TDS and all as directed at site including replacement of spare part complete all as specified and directed by Engr-in-Charge. Note:- (i) Servicing is carried out when Filter is chocked and TDS is not as per specified value. (ii) Spare part required will be measured & paid separately under respective item of this Schedule as supply only.

M&L for Servicing of R.O. Plant at OMQ & SMQ area at AF station Samana of capacity 500 Ltrs / Hrs by circulating citric acid with water to cleaning modules and descaling of system to improve flow and to reduce TDS and all as directed at site including replacement of spare part complete all as specified and directed by Engr-in-Charge. Note:- (i) Servicing is carried out when Filter is chocked and TDS is not as per specified value. (ii) Spare part required will be measured & paid separately under respective item of this Schedule as supply only from item no 78 to 80

Supply only sand suitable for commercial RO plant 500 Ltrs/hr.

Supply only Carbon media charcoal suitable for commercial RO plant.

Supply and fix in repair multiport valve of FRP tank for RO plant of capacity 500 Ltrs/hrs.

S&F in repair water level sensor switch for 50 Ltrs capacity RO plant along with its adapter complete.

Supply and fix in repair FRP tank vessel for RO plant of capacity 500 Ltrs/hrs of operating pressure maximum 100 PSI, Max Vacuum 17 KPa and temperature 1-50 centigrade. Make:- Proteck water technologies/ Hydro tech engineers.

Supply and fix in repair FRP housing vessel for membrane 8040 for RO plant of capacity 500 Ltrs/hr.

Supply and fix in repair membrane suitable for R.O. Plant of capacity 500 Ltrs / Hrs Capacity of size 80 cm dia and 40 inch length. Make : Dow 8040 or Equivalent make approved by the GE

Supply and fix in repair membrane suitable for R.O. Plant of capacity 50 Ltrs / Hrs Capacity of size .

Supply only Candle PP spun filter 5 micron filter 10'' Long 'Dia suitable for R.O. Plant of capacity 50 Ltrs / Hrs

Supply only Candle PP spun filter 5 micron filter 20'' Long 4''Dia suitable for R.O. Plant of capacity 500 Ltrs / Hrs

Supply only Candle thread solid filter 20'' Long 4''Dia suitable for R.O. Plant of capacity 500 Ltrs / Hrs

Supply only Pressure pipe 15 kg/sqcm with 25 mm inner diameter and 32 mm outer diameter suitable for R.O. Plant of capacity 500 Ltrs / Hrs

M & L for repair to electronic metering pump for of capacity dosing rate 4 Kg per square cm of 400 stokes per minute set for chlorine dozing and incl suitable gauge rewiring copper wire with properly insulating material and replacement of display, internal circuit,solenoide valve, bearing,impellar,bush,shaft,suction valve, discharge valve complete all as specified and directed by Engr-in-Charge.

M&L in repair Servicing & rewinding of vertical motor and pump of capacity 4 HP three phase, discharge 6m3/hr and head 102 m for 500 ltr/hr capacity RO plant of motor with super enamelled copper wire of existing size including greasing and coupling with motor and testing and replacement of ball bearing set,impellar of pump,shaft,bush complete required at drive end complete all as specified and directed by Engr-in-Charge.

S&F in repair pressure switch of range 0.2 to 7.5 bar pressure and differential pressure 0.7 to 4 bar range. Make:- Danfoss/Honeywell

Supply only RO sediment filter housing vessel (set of three) (for spun and solid thread filter) with its top mounting assembly for 500 ltrs capacity RO plant complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair only flow meter of capacity 250-2500 ltrs suitable for RO operating panel. Make:- Arose / servotec Engineers

Supply only sodium hypochlorite solution ( NAOCL) 6% cap all as specified and directed by Engg in-charge

Supply and fix in repair gun metal 20 mm bore ball valve .

Supply and fix in repair gun metal 25 mm bore ball valve .

M&L servicing and rewinding of motor capacity 1 HP single phase used in 500 Ltrs/hour capacity RO plant, rewinding of motor with super enamelled copper wire of existing size including greasing and coupling with motor and testing and replacement of ball bearing set, impeller of pump, shaft & bush etc complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair UPVC pipe of 32 mm bore , SCH 40 rating fixed complete to walls, ceilings or in floors etc along with its elbow,union,tee.

supply and fix in repair UPVC ball valve of size 32 mm bore.

Supply and fix in repair honeycomb pad numbers for air suction side for Symphony Hicool i 31 Litre Air evaporative cooler of cooling capacity of 50 Sqft.

Supply and fix in repair desert cooler submersible pump of capacity 8 watt,220-240 V,50 Hz and maximum lift of 1 meter. Make:- Crompton greaves/khaitan/usha/Symphony

Supply and fix in repair metallic Exhaust fan blade suitable for desert cooler of sweep capacity 1400 sqft.

Supply and fix in repair centrifuge type fan blade along with its two bearing suitable for Symphony Hicool i 31 Litre Air evaporative cooler of cooling capacity 50 sqft . Sample is Kept in office of AGE(B&R) Samana.

Supply and fix in repair fan motor of capacity 185 watt ,230 V, 50 Hz for Symphony Hicool i 31 Litre Air evaporative cooler. Make:- Crompton greaves/khaitan/coolhome

Supply and fix in repair PCB board of Symphony Hicool i 31 Litre Air evaporative cooler.

M&L for repairing of PCB board of Symphony Hicool i 31 Litre Air evaporative cooler.

M&L for taking out and rewinding of Exhaust fan motor of capacity 500 watt ,230 V,50 HZ for industrial desert cooler of sweep 1400 sqft with copper wire, after rewinding fix it in its position complete in running condition with connection complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 5 amps 240 V, three pin plug top.

Comprehensive / Preventive maintenance / servicing of PackageAC of 11 ton capacity of any make, maintenance carried out by cleaning of cooling and condenser coil of indoor and outdoor units with descaling solution, checking of refrigerant pressure and charging of refrigerant gas including testing / checking the serviceability of spares such as starting capacitor, running capacitor, fan motor, blower motor relays, thermostat, & wiring etc and servicing complete of indoor and outdoor units complete all as specified and directed by Engr-in-Charge.

Note:- (i) Spares such as starting capacitor, running capacitor, fan motor, blower motor relays, thermostat, & wiring etc if found defective will be measured & paid separately as supply & fix in repairs. (ii) Charging of gas if required will be measured and paid separately as supply & topping of gas. (iii) Replacement of compressor wherever required will be measured and paid separately.

Supply and fix in repair hermetic filter drier DCL 305 for Air cooled package AC of 11 ton capacity. Part no :- DCL 305 023Z0014 danfoss. Make:- Danfoss/Emerson or equivalent make.

Supply and fix in repair suction line accumulator for package AC of 11 ton capacity , Model ACCM-5330-9S. Make:- Danfoss/Emerson or equivalent make.

M&L for taking out unserviceable compressor sealed unit of 11 ton capacity from the Air cooled Package AC (make - Blue Star ), single phase 230 Volts, and replacing the same with new scrool copeland compressor sealed unit fixing & connecting the same including vacumization, pressure testing leakage rectification and supply and charging refrigerant gas and testing complete all as specified and directed by Engr-in-Charge. Note:- Unserviceable old retrieved compressor shall be replace with the same authorized dealer / company manufacture.

Material & labour for recharging of R-407C gas to Air cooled package air conditioner of capacity 11 TR after flushing the complete system, vacuum testing and the repairing the leaking tube / lines by brazing, charging the unit as per manufacturer instruction complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair fan blade suitable for outdoor unit of Air cooled package AC of 11 ton capacity

M&L for repairing condensing unit fan motor suitable for outdoor unit of Air cooled package AC of 11 ton capacity

Supply and fix in repair brass expansion valve suitable for Air cooled package AC of 11 ton capacity. Make:- Danfoss/Emerson or equivalent make.

Supply and fix in repair single core multistranded copper conductor cable, PVC insulated with sleeve of size 10 sqmm.

Supply only eyelets,ring lugs and copper lugs of size 6/10/16 mm.

M&L in repair for motor rewinding of indoor unit package AC air blow duct three phase induction motor of capacity 2.2 HP,230 V,50 Hz with removing and installation after rewinding in its position with its belt connection with damper blower.

Supply and fix in repair indoor unit cloth filter of dimension 0.78 m x 0.49 m suitable for Package AC of 11 ton capacity. Sample of filter is provided by Engr-in-charge.

Supply and fix in repair contactor 3 pole ,240 V,60 amps for Package AC panel. Make:-Siemens/L&T or equivalent Make

Supply only V Belt for Blower of size A 849LP/A32. Make:-Continental or Equivalent make approved by the GE

M&L in repair for rectification of electronic PCB with changing required numbers of diods and triods of automatic rising boom barrier with barrier boom size 3-3.5 mtrs.

M&L for servicing/repairing of 8 zone fire alarm panel including rewiring/soldering as required with integration with FACP programming complete all as specified and directed by Engr-in-Charge. Note: The job having one year comprehensive AMC.

S&F in repair dry battery 12V 7.2 AH suitable for fire alarm panel complete all as specified and directed by Engr-in-Charge. Make:- Exide/Amron

Supply & fix in repair conventional photoelectric smoke sensor. Make:- Agni/ Ravel

S&F in repair pedestal bearing P205 for package AC discharge air duct blower.

jagdish machinery stores

Sukhi Electricals