KLC Section - 2 Running contract

Amount

Maintenance

17.3.1:Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

17.78:Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.

17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White

17.20.1:Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid

17.25.2:Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:Flat back wash basin of size 550x400 mm

17.28.2.1:Flexible pipe32 mm dia

18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

18.74.1:Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, Collar and bush approved quality and colour .15 mm nominal bore with 30 cm length

50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall

50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm

9.82:Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

9.88:Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

9.90.4:Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 75 mm

OD23799/2021-2022:Providing and fixing mosquito net including cost of materials, labour etc

OD23800/2021-2022:Providing and fixing brass wall mixer unit including cost of materials, labour charge etc

OD23801/2021-2022:Engaging carpenter for repair work

OD23802/2021-2022:Providing and fixing S.S aldrop150mm including cost of materials, labour charge etc as per the istruction of Engineer charge

OD23803/2021-2022:Engaging beldar for dismantling and relaying aluminium work as per the directions of Engineer in charge.

18.18.3:Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

OD23820/2021-2022:Providing and fixing syphon innerset of flushing cistern including cost of materials ,labour charge etc

OD23821/2021-2022:Providing and fixing 20mm dia curtain bracket including cost of materials , labour charge etc

OD23823/2021-2022:Providing and fixing 750mm cp brass towel rail including cost of materials, labour charge etc

OD23824/2021-2022:Supplying and fixing acrylic name board including cost of materials , labour charge and conveyance etc

OD25378/2021-2022:Repairing cushion chair with U foam, furnishing cloth etc

OD25379/2021-2022:Removing the waste cumulative materials from the yard by 15km lorry conveyance

OD25380/2021-2022:Engaging coolie for cleaning and rearranging furniture as per the direction of Engineer in charge

OD25384/2021-2022:Cutting and removing arayal growth over the parapet wall, roof slab etc inccluding all cost of rectifying materials, burying chemicals (acid , kerosene etc) and reoval of waste materials with in a distance of 150m away from site as per the direction of Engineer in charge

18.22.1:Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:100 mm diameter

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.16.2:Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium

9.70.2:Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:100x58x1.90 mm

OD25420/2021-2022:Providing and fixing 15mm swan neck tap including cost of materials, labour charge etc

OD25423/2021-2022:Cleaning the overhead masonry tank of size 5.2m x 2m x 2.1 m including labour charge , cleaning materials etc as per the directions of Engineer in charge

OD25447/2021-2022:providing and fixing 150mm brass adjustable shower including cost of materials, labour charge etc

OD25448/2021-2022:providing and fixing brass telephonic shower including cost of materials, labour charge etc

OD25449/2021-2022:Providing and fixing brass two in one tap including cost of materials, labour charge etc

OD25513/2021-2022:Sticking computer cut vynyl sheet or fig. 2.5cm, 4cm or 5cm height ( block ,roman ,italic or Indian ) on the wooden board already fixed with all cost and conveyance

OD25541/2021-2022:Providing and fixing front door lock including cost of materials, labour charge etc

A. NISAMUDEEN

Bidder Name

A. NISAMUDEEN

V Sadanandan