RM-2024-25 RC 2 Phase 2 c l u s t e r 1 1 / o n e y e a r R C / R a n n i section/Pathanamthitta/Zone 4 For various PWD Roads under Roads section Ranny 4 Road stretches for a length of 15.27 km

Amount

Appendix -A Reactive Maintenance (Initial Rectification work)

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD118703/2024-2025:Close Graded Premix Surfacing/Mixed Seal Surfacing:-Case I,Type -A By manual Means.Providing, laying and rolling of close graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type A) aggregates using penetration grade bitumen using VG 30 to the required line, grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 80-100 KN capacity,and finished to required level and grade

10.3:Maintenance of Earth Shoulder (stripping excess soil) from the shoulder surface to achieve the approved level and compacting with plate compactor

Appendix -B Pre Monsoon works

OD118704/2024-2025: :Engaging man mazdoor for assisting wood cutter and removing the branches of trees and cutting in shape for keeping the road side without hindrance to the traffic as per the direction of deptl. officers at site.

OD118705/2024-2025:Engaging Man Mazdoor for clearing chocked culvert, clearing vegetation, removing covering slab, clearing drain etc

OD118706/2024-2025:Engaging wood cutter for cutting trees and branches in standing in dangerous condition .

OD118707/2024-2025:Engaging Hydraulic Excavator of 1 cum bucket

OD118708/2024-2025:Conveying materials &debris by Tipper lorry( 5 tonne ) to the places pointed by the departmental officers/ dumping yard

2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

2.3.2.A:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Mechanical Means

OD118709/2024-2025:Hire charges of rope for cutting trees standing in dangerous condition.

OD118710/2024-2025:Hire charges for machine saw including petrol charge.

OD118711/2024-2025: Engaging man mazdoor for filling potholes using departmental Bitumen aggregate cold mix/ Shelmac .

OD118712/2024-2025:Supplying and stacking Shelmac or equivalent ready mix 25 kg (1 bag) cold mix bags an instant pothole filling mixture from authorized agencies as per indents ,including conveying and unloading ,all charges for spreading and ramming etc and as per instruction of the Departmental officers including all incidental charges etc complete.

OD118714/2024-2025:Engaging Auto pickup for conveying Shelmac to various roads.

3.24.A:Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil by mechanical Means to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. Excavated material to be used in embankment within a lead of 50 metres (average lead 25 metres)

12.1.B.1:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Ordinary Soil - Depth upto 3m - Mechanical Means

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.B:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M20 (Without formwork)

OD132499/2024-2025:Dry rubble masonry for foundation and superstructure including all cost as per design and drawings

OD132518/2024-2025:Supplying and fixing DLP Boards

55.38a:Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on Structural Steel c section vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of structural steel c section 150 x 75 x 5 mm, 330 mm long complete as per clause 811.3.

Appendix -C -Proactive/preventive maintenance works

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD118698/2024-2025:Close Graded Premix Surfacing/Mixed Seal Surfacing:-Case I,Type -A By manual Means.Providing, laying and rolling of close graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type A) aggregates using penetration grade bitumen using VG 30 to the required line, grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 80-100 KN capacity,and finished to required level and grade

OD118699/2024-2025:EngagingMan Mazdoor for clearing drain and culverts

OD118700/2024-2025:Engaging Hydraulic Excavator of 1 cum bucket

4.1.B.2:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-VI - For sub-base cum drainage layer - Mix in Place Method

OD118701/2024-2025:Engaging labour with passenger car not less than 1000cc for Conducting and reporting routine inspections for 20 km for the entire length of the Project road at a frequency of 7 days through out the agreement period of running contract as directed by the departmental officers.

Appendix -D Emergency works

OD118695/2024-2025:Engaging Man Mazdoor for clearing chocked culvert, clearing vegetation, removing covering slab, clearing drain etc

OD118696/2024-2025:Engaging Hydraulic Excavator of 1 cum bucket

OD118697/2024-2025:Conveying materials &debris by Tipper lorry( 5 tonne ) to the places pointed by the departmental officers/ dumping yard

4.2.A.2:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-IV - For lower sub-base - Mix in Place Method

ABU MUHAMMEDALI (BID ID -2223684)

Bidder Name

ABU MUHAMMEDALI

Rinju P James