General

Manufacture, supply and delivery of H.D.P.E Pipes conforming to IS 4984-1995 including transportation to any where in A.P excluding Taxes. (Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 M) (P.H Items, P.56)

Manufacture, supply and delivery of H.D.P.E (PE-100 Grade) Fittings conforming to IS 4984-1995 including transportation to any where in A.P Excluding Taxes.

OD 110mm dia MS Collars

OD 110mm dia MS Flanges

OD 160mm dia MS Collars

OD 160mm dia MS Flanges

Reducer 160 X 140

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)-RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.

100mm dia DI Double Flanged Sluice Valve PN-1.60

150mm dia DI Double Flanged Sluice Valve PN-1.60

Supply and delivery of Bolts and Nuts with double washers including taxes and conveyance etc., complete. (1/2 " to 1 ")

Supply and delivery of Rubber Packing including taxes and conveyance etc., complete (3 mm / 6 mm thick).

Cutting open C.C. road surface with concrete saw cutter and removal with Breaker and tractor with 3 tonne trolly

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum

Filling with dust for trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH (revised RBR-FNDN-2.i)

Laying and jointing of H.D.P.E Pipes by butt fusion welding as per IS:7634–part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure - 1 Rmt (Public Health Items, P.5)

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Lowering, keeping in position and fixing C.I. sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces - 1 No. (PHE-CISV-15)

100mm Dia PN 1.60

150mm Dia PN 1.60

Supply and fixing of M.S Plats and its fabricatin charges etc., complete for M.S Pipes - 1 Kg.

Supply, laying and jointing of C.I.D Joints complete with rubber rings including filling with water, including cost of jointing Material etc., complete.

150mm dia CID Joints-15

100mm dia CID Joints-15

Engaging of the Fitter and Fitter Mazdoor for interconnections including all labor charges as directed by the departmental authorities.

Provision for Seignorage charges

Provision towards Merit@2% unseinorage for(as per G.O Ms No. 37 Dt:15-03.2024 of Industries and Commerce (M.III))Department

Provision towards Consideration amount @100% unseinorage for (as per G.O Ms No. 37 Dt:15-03.2024 of Industries and Commerce (M.III)) Department

Provision towards DMF@30% unseinorage for(as per G.O Ms No. 37 Dt:15-03.2024 of Industries and Commerce (M.III)) Department

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item