PROVN OF TILING WORK IN JCOs MD ACCN BLDG NOS F 8 3 F 8 4 AND F 8 5 OF SATA BTY AND CONSTR OF STORES FOR OFFRS MESS IN R O NCC GP HQ NAINITAL UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M & L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone agg) as in floors and finishing the top surface even and rough to receive the topping layer or tiling complete all as specified and directed.

M & L for glazed ceramic coloured tiles 300mm x 200mm x 5.5mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection or sub floor or sub base or similar work, laid in bays including necessary form work finished fair and even complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even complete as all specified and directed.

M & L for 2nd class hard wood 35mm thick plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces complete all as specified and directed.

S & F 150mm long aluminum, anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation, etc., and getting out in Hard/ Dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed with self tapping screws & fixed with L type or J- type or crannked hooks bolts in lieu of screw complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick as in ridge of an colour having tensile strenth of 550 Mpa as in roof covering / clading to wall , fixed with self tapping screws & fixed with L type or J- type or crannked hooks bolts in lieu of screw complete all as specified and directed.

M & L for MS Rolled sections as in framed work such as purlin, trush, square tube, MS pole, gratign etc with end of bars shouldered and/or revated or forged into spikes, framed guard bars, barred iron doors, ledders, framed balusters, walk ways, railing, welded wire mesh and similar work confirming to Fe 290 gde E -165 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in coping/ kerb/ bed blocks for hold fast/ including necessary form work complete all as specified and directed.

M&L for brick work with sub class `B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M& L for Hard core of gauge n exc. 63 mm,Broken stone and boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Removing Excavated soil to a distance not exceeding 50M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete, sub-base & apron etc complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for 10 mm thick backing coat or bedding in CM 1:4 to receive wall finishes as in verticle surfaces complete all as specified and directed.

M&L for vitrified tiles 8 to 10 mm thick light shade (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. with and including screed bed of 15 mm thick in CM 1:6, complete all as specified and directed.

M&L for virified tiles 8 to 10 mm thick light shade (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm, as in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over with and including screed bed or bedding layer 10mm thick in CM 1:4 complete all as specified and as directed

M & L for Eath filling in floors including spreading, levelling in layers not exc 25cm thick and well ramming including watering as required complete all as specified and directed

M&L for RCC 1:2:4 type B-1, (using 20mm graded crushed stone aggregate) as in beams, cantilever, lintels over 1.5m clear span supported on walls,beams and columns complete all as specified & directed.

M&L for form work to sides and soffits of beams, cantilever, lintels over 1.5m clear span supported on walls,beams and columns finished fare horigental or sloping flat surfaces complete all as specified and directed

S & F mild steel TMT bars , 6 to 8mm dia cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia all a specified and directed

S & F mild steel TMT bars , 5 to 10mm dia as in stirrups, spacers, binders, cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia all a specified and directed

S & F 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints and fixed to any position complete all as specified and directed

M & L for 2nd class hard wood 30mm thick plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces complete all as specified and directed.

S & F 100mm long aluminum, anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S & F 125mm size aluminum, anodised handle plate type bolt of extruded section and fixed complete all as specified and directed.

S & F 250mm long aluminium sliding door bolt, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F 100mm long aluminum mild steel but hinges medium weight cold roled complete all as specified and directed

S & F 75mm long aluminum mild steel but hinges medium weight cold roled complete all as specified and directed

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S & F mild steel work as hold in fasts, bands, straps, supports or stays for pipes eaves gutter including bolts if required , hooks (stay), clamps and similar small articls, comforming to Fe 290 grade-E-165 complete all as specified and directed

M & L for preparation of new or previously untreated plastered surfaces of wall of any description, not otherwise described over 10cm width or girth and applying two coats of cement base paint over a coat of primer complete all as specified and directed

M & L for preparation of new or previously untreated plastered surfaces of wall of any description, not otherwise described over 10cm width or girth and applying three coats of white wash over a coat of primer complete all as specified and directed

BOQ ( Sch 'A') E/M items Supply & Fixing point wiring for one light point/ fan (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in concrete/brick/ stone masonry walls for fixing conduit and plastering and white wash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor (FRLS) cable earth wire and connected to earth dolly complete all as specified and directed (Note:- wiring shall be done in colour coding as directed by Engineer in charge)

S&F ceiling rose, 3 phase/ PVC polycorbonate/surface bakelite 3 terminal isolated body with base plate complete all as specified and directed.

S & F switch piano, flush type single pole one way 5/6 Amp complete all as specified and directed

S & F switch piano, flush type single pole two way 5/6 Amp complete all as specified and directed

Supply and fixing LED light fitting 1 X 20W (warm/ milky white as required at site) 220W/AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling complete as specified and directed.

SURYA CONSTRUCTION

Ramsons

SS Construction Co

aditya construction