REPAIR / POLISHING OF WOODEN FURNITURE AND CANNING TO WOODEN CHAIRS OF VARIOUS TYPES AT MIL STN UNDER AGE I LANSDOWNE.

Amount

1.0 Sofa Set 5 Seater/4 seaters /3 Seater/Single seaters: (a) Taking out old unserviceable cushion foam with cover 21" x 22" x 4'' and S & F new cushion foam sheet 100 mm thick Foam 40 density duly covered with tapestry cloth not less than Rs.550/- per meter duly stitched with fine standard thread and providing best quality chain with runner on one side. FD-281/FD-373

(b) Taking out old unservicable broken battens of seat providing new battens made out of 1st class seasoned teak wood duly french polished,all as shown in drg. FD-281/FD-373

(c) Taking out old unservicable broken battens of back and providing new battens made out of 1st class seasoned teak wood duly french polished,all as shown in drg. FD-281

(d) Taking out old unservicable front legs and providing new legs made out of 1st class seasoned teak wood duly french polished, all as shown on drg. FD-281/373

(e) Taking out old unserviceable arms and profiding new arms made out of 1st class seasoned teak wood duly french polished, all as shown on drawing. FD-281/FD-373

(f) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-281/FD-373

2.0 Table dressing ladies with mirror: (a) Taking out existing old faded looking mirror of size 1200 x 380 x 5 mm thick with frame and providing new looking mirror of same size and shape duly framed with teak wood and replacement of ply wood with new commercial 6 mm thick plywood conforming to IS: 303 BWR grade on the back of mirror. FD-251, FD-378, DB-1980

(b) Taking out unserviceable drawer plywood, knob and S&F new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade duly french polished, and MS CP knob as shown on drawing. FD-251, FD-378, DB-1980

(c) Replacement of unserviceable top and providing new top of prelaminated Particle board exterior grade in teak shade flat pressed three layer type BWR grade as per the size and shape as shown on drg. FD-251, FD-378, DB-1980

(d) Replacement of unserviceable bottom and providing new bottom made of prelaminated Particle board exterior grade 18/19 mm thick BWR of the same shape and size complete all as specified and shown on drg. FD-251, FD-378, DB-1980

(e) Taking out unserviceable back plywood of table base and S&F new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade as shown on drawing. FD-251, FD-378, DB-1980

(f) Taking out unserviceable / broken sliding glass of table dressing ladies and S&F New sliding plain glass of 4mm thcik compleat all as specified and shown on drawings. FD-251, FD-378, DB-1980

(g) Taking out unserviceable aluminum channel of table dressing ladies and S&F New sliding plain glass of 4mm thcik compleat all as specified and shown on drawings. FD-251, FD-378, DB-1980

3.0 Table Dining 6/8 Persons (a) Dismantling existing unserviceable top and providing new top table dining 8 Persons of size 1800 x 900 x 18/19mm made of prelaminated Particle board exterior grade in teak shade flat pressed three layer type BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded duly french polished, all as specified and shown on drg. FD-273

(b) All as per item No 6 (a) but table bining 6 persons of size 1500 x 900 x 18/19 mm complete. FD-273 ,FD-30(M)

(c) Replacement of unserviceable legs of size 75 mm x 40 mm x 742 mm 1st Class seasoned teak wood duly french polished, all as specified and shown on drg. FD-273 ,FD-30(M)

(d) Replacement of unserviceable long rail made out of 1st class teak wood duly french polished ,25 mm thick and 100 mm wide complete all as shown on drg. FD-273 ,FD-30(M)

(e) Replacement of unserviceable short rail made out of 1st class seasoned teak wood duly french polished, 25 mm thick and 100 mm wide complete all as shown on drg. FD-273 ,FD-30(M)

(f) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-273 ,FD-30(M)

(g) S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs duly French polished. FD-273 ,FD-30(M)

4.0 Table 3' x 2' with out drawer (a) Dismantling existing unserviceable top and providing new top table 3'x2' of size 900x600x 18/19mm made of prelaminated Particle board exterior grade in teak shade flat pressed three layer type BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded duly Frence polished,all as specified and shown on drg. FD-284, FD-42

(b) Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood of size 742 x 60 x 60 mm at top and 30 x 30 mm at bottom duly Frence polished,complete all as per drg .FD-284 ,FD-42

(c ) Removing unservicable long rail and S & F of new long rail made of 1st class seasoned teak wood of size 25 mm x 65mm in section duly frenced polished, all as specified and shown on drg. FD-284 ,FD-42

(d ) Removing unservicable short rail and S & F of new short rail made of 1st class seasoned teak wood of size 25 mm x 65mm in section duly frenceh polished, all as specified and shown on drg. FD-284 ,FD-42

(e) Removing unservicable stiffener and S & F of new stiffner made of 1st class seasoned teak wood duly frence polished,all as specified and shown on drg. FD-284 ,FD-42

(f) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-284 ,FD-42

(g) S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs duly french polished, FD-284 ,FD-42

5.0 Table 3' x 2' with drawer (a) Dismantling existing unserviceable top and providing new top table 3'x2' of size 900x600x 18/19mm made of prelaminated Particle board exterior grade in teak shade flat pressed three layer type BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded duly French Polished, all as specified and shown on drg. FD-283 ,FD-41

(b) Removing unserviceable legs and S & F of new legs made of 1st class seasoned teak wood of size 742 x 60 x 60 mm at top and 30 x 30 mm at bottom duly French Polished, complete all as per drg . FD-283 ,FD-41

(c ) Removing unservicable long rail and S & F of new long rail made of 1st class seasoned teak wood of size 25 mm x 65mm in section duly French Polished, all as specified and shown on drg. FD-283 ,FD-41

(d ) Removing unservicable short rail and S & F of new short rail made of 1st class seasoned teak wood of size 25 mm x 65mm in section duly French Polished, all as specified and shown on drg. FD-283 ,FD-41

(e ) Removing unservicable drawer and S & F of new drawer made of 1st class seasoned teak wood and 6 mm thick plywood BWR duly French Polished, including chromium plated knob. Rest all as specified and shown on drg. FD-283 ,FD-41

(f ) Removing unservicable stiffener and S & F of new stiffner made of 1st class seasoned teak wood duly French polished, all as specified and shown on drg. FD-283 ,FD-41

(g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-283 ,FD-41

(h) S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs duly French polished. FD-283 ,FD-41

6.0 Chair dining (a) Replacement of unserviceable rail made of 1st class seasoned teak wood with suitable holes for caning duly French polished, as per drg. FD-279

(b) Replacement of unserviceable front legs made of 1st class seasoned teak wood duly french polished,as per drg. FD-279

(c) Replacement of unserviceable rear legs made of 1st class seasoned teak wood duly french polished, as per drg. FD-279

(d) Replacement of unserviceable stiffeners made of 1st class seasoned teak wood duly french polished, as per drg. FD-279

(e) Replacement of unserviceable back rest made of 1st class seasoned teak wood duly french polished, as per drg. FD-279

(f) Removing existing cane from chairs and including new cane 2 mm wide half round , as per drg. FD-279

(g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-279

7.0 Chair writing (a) Replacement of unserviceable rail made of 1st class seasoned teak wood with suitable holes for caning duly French polishd, as per drg. FD-250, FD 280

(b) Replacement of unserviceable front legs made of 1st class seasoned teak wood duly French polished,as per drg. FD-250, FD 280

(c) Replacement of unserviceable rear legs made of 1st class seasoned teak wood duly French polished as per drg. FD-250, FD 280

(d) Replacement of unserviceable stiffeners made of 1st class seasoned teak wood duly French Polished,as per drg. FD-250, FD 280

(e) Replacement of unservicable arm rest made of 1st class seasoned teak wood duly French Polished, as per drg. FD-250, FD 280

(f) Removing existing cane from chairs and including new cane 2 mm wide half round , as per drg. FD-250,FD-280/Similar Pattern.

(g) Replacement of unservicable back rest made of 1st class seasoned teak wood duly French Polished,as per drg. FD-250, FD 280

(h) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-250, FD 280

8.0 Chair easy (a) Replacement of unserviceable rail/bead for caning made of 1st class seasoned teak wood with suitable holes for caning dule french polished, as per drg. FD-229/Similar Pattern

(b) Replacement of unservicable front legs with new legs made of 1st class seasoned teak wood duly french polished,as per drg. FD-229/Similar Pattern.

(c) Replacement of unservicable rear legs with new legs made of 1st class seasoned teak wood duly french polished as per drg. FD-229

(d) Replacement of unservicable seat frame with new of 1st class seasoned teak wood of section 75 mm x 40 mm of size 510 mm long in frant and 480mm long in rear duly french polished, as per drg. FD-229

(e) Replacement of unservicable back frame with new of 1st class seasoned teak wood of section 75 mm x 40 mm of size 510 mm long in frant and 480mm long in rear duly french polished, as per drg. FD-229

(f) Removing existing cane from Seat of chairs and including new cane 2 mm wide half round , as per drg. FD-229/Similar Pattern.

(g) Removing existing cane from Back of chairs and including new cane 2 mm wide half round , as per drg. FD-229/Similar Pattern.

(h) Replacement of unservicable arm rest with new of size 65x25mmx 610mm duly french polished, as per drg. FD-229

(j) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-229

9.0 Chair Wooden Bottom (a) Replacement of unserviceable rail made of 1st class seasoned teak wood with suitable holes for caning duly French polished, as per drg. FD-225

(b) Replacement of unserviceable front legs made of 1st class seasoned teak wood duly french polished,as per drg. FD-225

(c) Replacement of unserviceable rear legs made of 1st class seasoned teak wood duly french polished, as per drg. FD-225

(d) Replacement of unserviceable stiffeners made of 1st class seasoned teak wood duly french polished, as per drg. FD-225

(e) Replacement of unserviceable back rest made of 1st class seasoned teak wood duly french polished, as per drg. FD-225

(f) Removing existing Seat plywood from chairs and including new seat plywood of 6mm thick , as per drg. FD-225/Similar Pattern.

(g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-225.

10.0 Table writing FD/Med (a) Dismantling existing unserviceable top and providing new top of size 1145 x 600 x 18/19 mm made of prelaminated Particle board exterior grade in teak shade flat pressed three layer type BWR grade ISI marked and teak wood beading all round 6 mm thick shall be provieded duly french polished,all as specified and shown on drg. FD-33, FD-249 FD-275 / Similar Pattern.

(b) Replacement of unservicable legs with new legs made of 1st class seasoned teak wood duly french polished,as per drg. FD-33, FD-249 FD-275

(c) Repair of drawers (replacement of ply wood 6mm) duly french polished,including chromium plated knobs etc complete all as specification and directed. FD-33, FD-249 FD-275

(d) Replacement of unservicable stiffeners with 1st class seasoned teak wood duly french poished,as per drg. FD-33, FD-249 FD-275

(e) Replacement of unserviceable drawers side with new of size 600 x 500 x 18 mm pre laminated Particle board exterior grade ISI marked all as per drg complete. FD-33, FD-249 FD-275

(f) Replacement of unserviceable lock of drawers with new brass lock 6 lever 50 mm all as per drg complete. FD-33, FD-249 FD-275

(g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge. FD-33, FD-249 FD-275

11.0 Chair dining officer MAP Wooden FD/MAP-II / 04 and similar pattern:- (a) Replacement of unservicable front legs with new legs made of 1st class seasoned teak wood duly french polished,as per Drg No FD/MAP-II/04

(b) Replacement of unserviceable rear legs made of 1st class seasoned teak wood duly french polished,as per Drg No FD/MAP-II/04

(c) Removing existing Seat plywood with foam cushion and tapestry cloth from chairs and including new seat plywood of 12 mm thick as per drg and fixing foam cushion 75mm thick and 32 density with tapestrt cloth approved by AGE(I) Lansdowne as per Drg No FD/MAP-II/04

(d) Replacement of unservicable Front/back/left/right rail of seat with new Front/back/left/right rail of seat made of 1st class seasoned teak wood duly french polished,as per Drg No FD/MAP-II/04.

(e) Replacement of unservicable back verticle rail with new back verticle rail made of 1st class seasoned teak wood duly french polished,as per Drg No FD/MAP-II/04.

(f) Replacement of unservicable back horiozontal top rail with new back horiozontal top rail made of 1st class seasoned teak wood duly french polished,as per Drg No FD/MAP-II/04.

(g) Replacement of unservicable stiffener set of three legs with new stiffener set of three legs made of 1st class seasoned teak wood duly french polished,as per Drg No FD/MAP-II/04.

(h) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge Drg No FD/MAP-II/04.

12.0 Table centre (a) Dismantling of unserviceable top and providing new top made of prelaminated Particle board exterior grade 18/19 mm thick BWR including 6mm thick teak wood beading all round duly French Polished, all as specified and directed. FD-274, FD-235

(b) Replacement of unserviceable legs with new legs made of 1st Class seasoned teak wood duly French Polished,as per drg. FD-274, FD-235

(c) Replacement of unserviceable short rail with new short rail made of 1st Class seasoned teak wood duly French Polished,as per drg. FD-274, FD-235

(d) Replacement of unserviceable long rail with new long rail made of 1st Class seasoned teak wood duly French Polished,as per drg. FD-274, FD-235

(e) S&F wooden corner cleat made of 1st class seasoned teakwood duly French Polished, to strengthen long rails and legs. FD-274, FD-235

(f) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge Drg No FD/MAP-II/04.

13.0 Teapoy wooden (a) Dismantling of unserviceable top and providing new top made of pre laminated Particle board exterior grade 18/19 mm thick BWR including 6 mm thick teak wood beading all round duly french polished,all as specified and directed. FD-278

(b) Replacement of unserviceable legs with new legs made of 1st Class seasoned teak wood duly French Polished,as per drg. FD-278

(c) Replacement of unserviceable short rail with new short rail made of 1st Class seasoned teak wood duly French Polished, as per drg. FD-278

(d) Replacement of unserviceable long rail with new long rail made of 1st Class seasoned teak wood duly French polished,as per drg. FD-278

(e) S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs duly french polished,. FD-278

(f) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge Drg No FD/MAP-II/04.

14.0 Peg Table (a) Dismantling of old and unserviceable top and providing new top made of pre laminated Particle board exterior grade 18/19 mm thick BWR including 6 mm thick teak wood beading all round all as specified and directed. FD-277/FD-236

(b) Replacement of unserviceable legs with new legs made of 1st Class seasoned teak wood duly french polished,as per drg. FD-277

(c) Replacement of unserviceable short rail with new short rail made of 1st Class seasoned teak wood duly french polished, as per drg. FD-277

(d) Replacement of unserviceable long rail with new long rail made of 1st Class seasoned teak wood duly french polished,as per drg. FD-277

(e) Replacement of unservicable stiffeners with 1st class seasoned teak wood duly french polished, as per drg. FD-277

(f) S&F wooden corner cleat made of 1st class seasoned teakwood to strengthen long rails and legs duly french polished,. FD-277

(g) Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as directed by Engr in Charge Drg No FD/MAP-II/04.

15.0 Table bed side (a) Taking out unservicable top of table bed side and providing new top of Prelaminated Particle board exterior grade 18/19 mm thick BWR grade of same size and shape as shown in drg. FD-276

(b) Taking out unservicable sides of table bed left and right side and providing new sides of Prelaminated Particle board exterior grade 18/19 mm thick BWR grade of same size and shape as shown in drg. FD-276

(c) Taking out unservicable shelf of table bed side and providing new shelf of Prelaminated Particle board exterior grade 12 mm thick BWR grade of same size and shape as shown in drg. FD-276

(d) Replacement of unserviceable bottom and providing new bottom made of prelaminated Particle board exterior grade 18/19 mm thick BWR of the same shape and size complete all as specified and shown on drg. FD-276

(e) Taking out old ply from the back and providing new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade all as specified and shown in drg. FD-276

16.0 Bed Hard Plywood Top: (a) Taking out old unservicable long rails of bed ply wood to and Provision of new long rails of seasoned teak wood of same shape and size duly french polished, all as spefied and shown on drawing. FD-246

(b) Taking out old unservicable short rails of bed ply wood to and Provision of new long rails of seasoned teak wood of same shape and size duly french polished, all as spefied and shown on drawing. FD-246

(c) Replacement of unserviceable ply wood teak face and providing 4mm thick ply wood ISI Marked BWR teak face on one side and other commercial of size 780 x 340 mm on both side of head board duly french polished,. FD-246

(d) All as per item No 108 above but size 780 x 180 mm for foot boards.FD-246

(e) Dismantling of unserviceable plywood top with new plywood 12 mm commercial BWR confirming to IS 303 as shown on drg. FD-246 /Similar Pattern.

(f) Taking out old unserviceable bottom rails of bed ply wood top and Provision of new bottom rails of seasoned teak wood of required shape and size duly french polished, all as specified and shown on drawing. ,FD-246

(g) S&F 4 Nos wooden corner cleat to strengthen long rails and legs made of new seasoned teak wood of required shape and size duly french polished, all as specified and directed. ,FD-246

(h) Taking out unserviceable head board including legs of Bed plywood top and S&F new head board including legs made out of kiln (plant) seasoned Ist class hard wood (Teak wood) free from all defect and knots and plywood one side teak faced 3.5mm thick on the frame complete duly French Polished, all as specified and shown on drg. ,FD-246

(j) Taking out unserviceable foot board including legs of Bed plywood top and S&F new foot board including legs made out of kiln (plant) seasoned Ist class hard wood (Teak wood) free from all defect and knots and plywood one side teak faced 3.5mm thick on the frame complete duly french polished, all as specified and shown on drg. FD-246

(k) Taking out unserviceable stiffener of Bed plywood top and S&F new stiffener made out of kiln (plant) seasoned Ist class hard wood (Teak wood) free from all defect and knots complete all as specified and shown on drg. FD-246

17.0 M&L for Removing old polish dust dirt etc from entire surface of wooden furniture items by specified method, filling up holes cracks and patches with specified material preparing the surfaces smooth and clean and polishing the surfaces with french polish complete for following items:-

(a) Chair dining FD-279/Similar pattern

(b) Chair easy FD-229/Similar Pattern.

(c) Chair writing (CB) FD-280/Similar Pattern.

(d) Sofa set 5 seat. FD-281

(e) Sofa set 4 seat. FD-281

(f) Sofa set Single pices FD-281

(g) Bed plywood top FD-246/Similar Pattern

(h) Table Center FD-274

(I) Table bed side. FD-248

(j) Teapoy. FD-278

(k) Table dining 6/8 persons. FD-273

(m) Peg table. FD-277

(n) Table 3' x 2' with drawer FD-283

(o) Table 3' x 2' with out drawer. FD-284

(p) Table writing FD-275,FD-249/FD-35

(q) Table dressing Ladies with mirror FD-251/378

(r) Chair Wooden bottom FD-225

(s) Chair Dining officer wooden Drg No FD/MAP-II/04

M/s Kapil Furniture (BID ID -3168871)

VARAROHA BUILDERS (BID ID -3168164)

CITIZEN FURNITURE INDUSTRIES (BID ID -3168613)