State Plan 2022-23. Civil works. Water Quality Monitoring and Surveillance and effluent Quality Testing labs under Quality Control Division, TVPM. Setting up of Effluent testing laboratory at SL puram, Cherthala.

Amount

Appendix_A_ Civil Works

2.7.2:Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (requiring blasting)

19.9.1.1:Constructing brick masonry circular type manhole 0.91 m internal dia at bottam and 0.56 m dia at to[ in cement mortar 1:4 (1 cement : 4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix ( 1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size ), and making necessary channel in cement concrete 1:2:4 ( 1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design: 0.91 m deep with S.F.R.C cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to IS: 12592, total weight of cover and frame to be not less than 182 kg, fixed in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately):With cement burnt clay F.P.S. (non modular) bricks of class designation 7.5

50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

5.9.16.2:Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsAbove 20 cm wide

5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars

5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

9.1.2:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood

9.7.1:Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood

9.72.1:Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:125x85x5.5 mm (heavy type)

13.9.2:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster

11.49.2:Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tiles 600x600 mm

8.13.1:Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

11.39:Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

50.9.15.5:Providing and fixing iron hooks and eyes: 100 mm

50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)

OD23873/2022-2023:Providing and fixing shelves/ cabins below the granite working slab with 18 mm thick Marine ISI 710 plywood with 100% Gurjun and HDF pre laminate sheet (exterior qlty) , The rack should be fixed on a plywood frame of 0.7 m in the bottom. vertical gables/ sides made of 18 mm thick HDF double side laminated sheet of thickness 0.18 mm pressed with edge bands. The skirting with 0.1m to be provided with HDF double sided laminated sheet in the front and bottom. The shutters are to be of 0.5m W x 0.70 m H in size . inside of the cabin shall have two racks of HDF laminated sheets. The cost includes that of auto close hinges, S.S cabinet handles, Catches , screws, edge clamps , grips , adhesives etc. complete as per the direction of department staff/engineer in Charge

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Appendix B Plumbing Works

17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

17.11.2:Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 600x450x200 mm

50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2

50.18.9.5.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2

50.18.9.6.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2

50.18.9.7.1:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

50.18.9.12.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wall

50.18.9.13.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 12 Kgf/ cm2- External work- exposed on wall

OD23874/2022-2023:Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore

100.98.1008:Engaging Coolie.

100.98.1009:Engaging Fitter ( grade 1).

Appendix 3

OD23875/2022-2023:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A, one way modular switch. Data derived from E&M 2016 1.24.3

OD23876/2022-2023:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/<br>recess including cutting the wall and making good the same in case of recessed conduit as required.25<br>mm

OD23877/2022-2023:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/<br>recess including cutting the wall and making good the same in case of recessed conduit as required.20<br>mm

OD23878/2022-2023:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A, one way modular switch

OD23879/2022-2023: Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7metre long etc.(but without charcoal/ coke and salt) as required. Data derived from DSR E&M 2016 - 5.3

OD23880/2022-2023: Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N. Data derived from DSR E&M 2016 - 3.2.4

OD23881/2022-2023: Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps RCCB 4 pole 30 ma.

OD23882/2022-2023: Supplyirig and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing! MCB DB complete with connections, testing and commissioning etc. as required. DSR E&M 2.14.2

OD23883/2022-2023: Wiring for light point/ fan point/ exhaust fan point/ call bell poin.t with 1.sq. mm<br>FRLS PVC insulated copper conductor single core cable in surface I recessed medium<br>class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing<br>the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable<br>etc. as requir<br>Data derived from DSR E&M 1.10.3

OD23884/2022-2023:supply and Fixing 4 x16 sq mm + 2 x 6 sq mm earth wire

OD23885/2022-2023: Supplying and fixing of Earth bench Terminal strip

OD23886/2022-2023: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2X1.5 sq. mm + 1 X 1.5 sq. mm earth wire. Data derived from DSR E&M 2016 1.14.1

OD23887/2022-2023:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

OD23888/2022-2023:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. Data derived from DSR E&M 2016 1.14.3

OD23889/2022-2023:Supply and Fixing 4 x10 sq mm + 2 x 6 sq mm earth wire

OD23890/2022-2023:Supply, conveyance, installation , testing of pre-wire wired LED tube light with fitting on wall/ceiling and giving connection with required length of 16/0.20mm 3 core round copper flex wire conforming to relevant ISS or extending the original wiring and giving connection etc as required as directed by the departmental officers

OD23891/2022-2023: Supply, conveyance, installation and commissioning of light duty Exhaust fan of 300/305mm sweep in metal frame working on 230V A/C 300 sweep including making good the damages etc as required as directed by the departmental officers

OD23892/2022-2023: Supply, conveyance installation ,testing of ceiling fan or Wall mounted fan of 1200mm sweep size of Crompton /Philips/Usha or very good quality make using standard accessories including electronic type regulator, the down rod with 16/0.20mm PVC insulated and PVC sheathes 3 core round copper conductor flex wire 650/1100V grade or with extended original wiring etc as required single control ceiling/wall fan point with ceiling rose etc complete as directed by departmental officers

OD23893/2022-2023: Supplying and fixing following size/ modules, PVC box along with modular base & cover plate for modular switches in recess etc. as required. Data derived from DSR E&M 2016 1.27

OD23894/2022-2023: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet. Data derived from DSR E&M 1.24.4

OD23895/2022-2023:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet.

OD23896/2022-2023: Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connection etc. as required. Data derived from DSR E&M 2016 1.33

OD23897/2022-2023: Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.<br>Data derived from DSR E&M 2016 - 2.11

OD23898/2022-2023:Installation, testing and commissioning of Mirror lamp of all types, complete with all accessories of branded make 12 Watt Square LED Slim Downlight (Cool Day Light)directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

OD23899/2022-2023:Supply and Fixing the following modular switches & accessories in the existing front plates and giving<br>necessary connections as required (RoHS compliant )25A 3pin Shuttered socket

OD23900/2022-2023:Supply, installation of banded make of Carrier/LG/ Samsung/ Daikin/ Voltas/Bluestar 1 Ton inverter split AC and accessories such as stabilizer, Condenser unit stand etc.with an efficient and fast cooling experience.which is durable and easy to maintain. It has a 1.5 ton capacity and comes with 3- 5 star rating. The AC to process a sleep mode which reduces excessive cooling with beautiful color suitable to ambiance . The AC has a LCD display on unit with remote operated and accompanied with a temperature LCD display gauge. The cost includes that of brand new split inverter AC, STAND, installation charge etc complete as per the direction of engineer in charge

OD23901/2022-2023: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.<br>Single pole<br>Data derived from DSR E&M2016- 2.10.1<br><br>

C Jayaprasad

Bidder Name

C Jayaprasad

DINUMON P