Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.1 LAccepted-AOC KANNETH PUTHENCRUZ 682308 | ERNAKULAM | KERALA | 682308 | ₹8.1 L | L1 | Accepted-AOC The lowest amount quoted by the bidder Cherian varghese for an amount Rs 809418.45 and the work has been awarded to him |
| Sl No | Description | Qty | Unit | CHERIAN VARGHESE L1 |
|---|---|---|---|---|
| 1.00APPENDIX A- CIVIL WORKS | ||||
| 1.00 | 21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating
50 micron) | 182.99 | Kg | 563.32 ₹1.0 L |
| 1.00 | 21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing hinges /
pivots and making provision for fixing of fittings wherever required including the
cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for
separately)Powder coated aluminium (minimum thickness of powder coating 50
micron) | 38.45 | Kg | 682.32 ₹26,231.79 |
| 1.00 | 21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness (weight not less than 10kg/sqm) | 25.55 | sqm | 1,232.01 ₹31,484.02 |
| 1.00 | 21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on
both sides | 34 | sqm | 1,148.99 ₹39,065.66 |
| 1.00 | 21.17
Providing and fixing anodised aluminium grill ( anodised transparent or dyed to
required shade according to IS : 1868 with minimum anodic coating of grade AC 15)
of approved design/pattern, with approved standard section and fixed to the existing
window frame with C.P brass/stainless steel screws @ 200 mm centre to centre,
including cutting the grill to proper opening size for fixing and operation of handles
and fixing approved anodised aluminium standard section around the opening, all
complete as per requirement and direction of Engineer-in-charge.(Only weight of grill
to be measured for payment ). | 34.02 | Kg | 677.55 ₹23,048.22 |
| 1.01 | 9.100.1
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete:125 mm | 5 | no | 72.54 ₹362.70 |
| 1.01 | 9.83
Providing and fixing aluminium die cast body tubular type universal hydraulic door
closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight
upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc.
complete. | 5 | no | 1,239.08 ₹6,195.40 |
| 1.01 | 9.97.5
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not
less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete: 100x10 mm | 5 | no | 70.88 ₹354.40 |
| 1.01 | 21.13
Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair
of handles ( best make of approved quality ) for aluminum doors including necessary
cutting and making good etc. complete | 5 | each | 543.1 ₹2,715.50 |
Tender Value
₹8.4 L
EMD Value
₹21,004
Closing Date
14 May 2026, 5:00 pmClosed
Regional Engineer
REGIONAL ENGINEER, KERALA STATE NIRMITHI KENDRA, REGIONAL OFFICE, Rajiv Gandhi Colony Road LIC Juction ,Neendoor P.O, Kottayam-686601
Civil, Electrical , Plumbing and Sanitary Works
2026_KSNK_849366_1
KSNK/TECH/KTM/FWLSV-22R1/2026
Open Tender
Civil Works - Buildings
120 days
Vaikom
Refer NIT
5 documents required · 5 mandatory
₹1,680
₹21,004
Yes
19 Jun 2026
6 May 2026
16 May 2026
6 May 2026
14 May 2026
6 May 2026
6 May 2026 - 14 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1APPENDIX A- CIVIL WORKS | ||||||
| 1.001 | 21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating
50 micron) | - | Kg | 1.25 | - | itemH1Code1 |
| 1.002 | 21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing hinges /
pivots and making provision for fixing of fittings wherever required including the
cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for
separately)Powder coated aluminium (minimum thickness of powder coating 50
micron) | - | Kg | 1.25 | - | itemH1Code1 |
| 1.003 | 21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness (weight not less than 10kg/sqm) | 1 | sqm | 1.25 | ₹1.25 | itemH1Code1 |
| 1.004 | 21.2.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on
both sides | - | sqm | 1.25 | - | itemH1Code1 |
| 1.005 | 21.17
Providing and fixing anodised aluminium grill ( anodised transparent or dyed to
required shade according to IS : 1868 with minimum anodic coating of grade AC 15)
of approved design/pattern, with approved standard section and fixed to the existing
window frame with C.P brass/stainless steel screws @ 200 mm centre to centre,
including cutting the grill to proper opening size for fixing and operation of handles
and fixing approved anodised aluminium standard section around the opening, all
complete as per requirement and direction of Engineer-in-charge.(Only weight of grill
to be measured for payment ). | - | Kg | 1.25 | - | itemH1Code1 |
| 1.006 | 9.100.1
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete:125 mm | - | no | 1.25 | - | itemH1Code1 |
| 1.007 | 9.83
Providing and fixing aluminium die cast body tubular type universal hydraulic door
closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight
upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc.
complete. | - | no | 1.25 | - | itemH1Code1 |
| 1.008 | 9.97.5
Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not
less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete: 100x10 mm | - | no | 1.25 | - | itemH1Code1 |
| 1.009 | 21.13
Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair
of handles ( best make of approved quality ) for aluminum doors including necessary
cutting and making good etc. complete | - | each | 1.25 | - | itemH1Code1 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
Agreement.pdf
Tender Documents • 0.12 MB
TenderCondition.pdf
Other Document • 0.66 MB
EpaymentForm.pdf
Additional Documents • 0.01 MB
BOQ_1435236.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid