Construction of Community Hall at Veppangudi AD Colony in Varavanai Panchayat

Amount

Name of the Work : Construction of Community Hall at Veppangudi AD Colony in Varavanai Panchayat

Earthwork excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc., complete complying with standard specification

Supplying and filling in foundation and basement with filling excavated earth in larges of not more than 15cm thick well rammed watered and compacted including & conveyance and all labour charges etc.,

Cement concrete 1:4:8 (One cement four sand and eight aggregates) using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification

Brick Work cm 1:5 mix (One Cement and Five Sand) using Country bricks ground maded of size 23x11x7 cm including curing, finishing and cost & Conveyance of all materials etc.,

Supplying and erecting centering for sided centering for soffits of RCC Slabs of plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S. angles of size 25mm X 25mm

Supplying and erecting centering for sided centering for soffits of RCC Slabs of plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S. angles of size 25mm X 25mm

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

RCC 1:1/2:3 mix using 20mm ISS HBG metal for RCC items of work excluding items of works excluding centering, shuttering and cost of reinforcement grill, out including curing etc., complete and also including fixing fan clamps and mixtures in RCC works.

Plastering with cm 1:5 mix(One Cement and five Sand) to 12mm thick including cost and conveyance of all materials in all floors etc., as directed by departmental officers etc.,

Plastering surfaces of RCC items such as slabs, beams, sunshadeds with cement mortar 1:3-10mm thick including packing, providing cement mortar beading for sunshades staircase, steps, lands slabs etc., as directed by departmental officers etc.,

Paving the floor with Vertified tiles 0.60mx0.60mx0.08m in all floors over a base layer of cement mortar 1:3 (One Cement and three Sand) 20mm thick laid in situation and pointed with same coloured cement

Providing weathering course with best quality of brick jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab, the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness

Finishing top roof mix one course machine pressed tiles of size 20cmx20cmx2cm approved quantity with CM 1:3 12mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc.,

Supplying and fixing PVC rain water down fall pipe of 100mm dia with necessary shoes, bends & clamps etc.,

Distembering two coats of oil bound distember using coat of primer coat including cost & Conveyance to size and all labour charges etc., complete

Painting two coats with ready mixed Exterior Emulsion paint of approved quality and colour over a priming coat, including through scrapping, clean removel of dirt etc., complete

Painting two Coats of new iron work with best quality synthetic enamel paint of approved quality and colour with primimg coat including the cost of all materials etc., in all floors

Fabricating supply and fixing and Position of MS door with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6mm, MS angle intermediate stiffner will be 35x35x6mm with cross stiffner 25x25x5mm flats covered. door 0.90mx2.10m

Fabricating supply and fixing and Position of MS Windows with two leave. The Window outer frame will be35x35x6mm MS angle, the shutter frame will be 25x25x6mm, MS angle intermediate stiffener will be 25x25x6 with cross stiffner 25x25x6mm with cross stiffner 25x25x5mm flats covered Window size 1.20m x 1.30m

Towards the cost of RWH Arrangements

Supplying and fixing Following Electrical Arrangements

Wiring with 2x1.5 sq.mm(22/0.3) PVC insulated SC, Unsheathed Cu. Conductor of 1100v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour for open PVC light point/fan point. SD 17

Wiring with 2x1.5 sq.mm(22/0.3) PVC insulated SC, Unsheathed Cu. Conductor of 1100v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm h TW switch box and 5A3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWGTC wire for open PVC Plug point (SD 36)

Wiring with 2x4 sq.mm(56/0.3) PVC insulated SC, Unsheathed Cu. Conductor of 1100v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm h TW switch box and 15 A3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWGTC wire for open PVC Plug point (SD 39)

Supply and run of 2 x 1.5 Sqmm (22x0.3) PVC insulated SC unsheathed Cu.conductor of 1100v grade in 25mm dia GI pipe (class "B"_ suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 69)

Supply and run of 2 x 1.5 Sqmm (22x0.3) PVC insulated SC unsheathed Cu.conductor of 1100v on 7/20 GI bearer wire for service connection main (SD 64)

Supply and fixing 4'36 Watts Flu Fitting complete with Wlwctronic Ballast with TW round Block on Wall or ceiling with FLU Tube with PVC Unsheathed Copper Leads from Terminals to the Tube Light Fittings (SD 87)

Supplying and fixing of 1200mm (48") AC Ceiling fan with stepped electronic 300W regulator with 1m down rod on the existing clamp SD106

Supply and fixing 16AMps DP Main Switch with metal clad of 500w with fuse and Neutral (Side handle) on Suitable TW Box PWD Earthing

Supply and fixing of 4'40 Watts Single Street Light Flu Fitting complete with copper chok and condensor with 20mm GI Pipe (Glass "B") with One number 20mm GI bend complete on the existing post/wall with 16 A Aerial-Fuse unit on M.S Plate With PVC unsheathed Cu. Leads with MS clambs With Aluminium Painting with Flu Tubes Street Light Fittings (SD 94)

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

S.Senthamil Selvan