SITC of Air cooled central AC Machine

Amount

S & F, 240 V , 21A, AC OLP-3+ Starter making necy connections with PVC Cu wire and earth continuity wire etc. incl S & F, 175mm x 100mm GI box compl flushed in wall with VOLTCHECK, AMPCHECK & TIMECHECK incl all connection & mending good the damages ( Make - Electron AC stater OLP- 3+ )

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make - Havells / RR Kabel / Polycab / KEI) in 20mm size PVC rigid conduit 'FR' (Make-Precision) incl. necy. fittings as required

i)2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

Supplying and Drawing 1.1 KV grade Unarmoured Copper cable (Make - Havells / RR Kabel / Polycab / KEI)

i) 4 Core 10 sqmm

ii) 2 core 6 sqmm

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works

(a) 20 mm size

(b) 25 mm size

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

iii)2 x 4 sqmm. + 1 x 2.5 sq.mm.

v) 4 x 10 sq. mm. + 2 x 6 sq. mm.

Supply and Fixing of 6 Module waterproof cabinets IP-65 -IK 09- Class II , reversible door consisting 2 position rail PVC box with supplying and fixing 32 A FP MCB Isolator on din rail of existing DBs and necessary connection.(Make- Legrand / Schneider / Siemens / ABB / L & T)

Supply and Fixing 415V,3 Ph, 50Hz Direct -on line Starter in sheet enclosure type as per dirction of EIC.(Make- Legrand / Schneider / Siemens / ABB / L & T) suitable for operate 7.5 TR capacity SAC as per direction of EIC

(B) AC Machine Supply & Delivery of high wall Inverter type Air- Conditioner machine (2/2.2Tr) having cooling Capacity not less than 7034 W, ISSER 3.8 to 4.39, Noise level not more than 50 db. This Split air conditioning machine fitted with Rotary / scroll Compressor , LCD remote , having copper made evaporator & condencer coil , operating ambient temp 50 degree° C & all other accessories suitable for Refrigerent -R32/R410 A. ( Make- Hitachi / O-General / Mitsubishi Electric / Mitsubishi Heavy Industries as per approved by EIC )

Installation , testing & Commissioning of 1/1.1/1.5/2/2.2 ton AC Machines complete with outdoor condensing unit on iron angle/ powder coated bracket & indoor cooling unit on wall with suitable bracket. Rate is incllusive of cutting of wall for making holes and mending good the damages.

REFRIGERENT PIPE:- Supply & drawing , 5/8" & 3/8" or 1/2" & 1/4" copper refrigerant pipes with 9mm thick rubber nitrile rubber insulation and Al foil tape complete fittings elbows , bends , supporting arrangement on walls alongwith other access on the surface of wall

DRAIN PIPING:- Supply and fixing 240V 25A 3 Pin modular type plug top with indicator (Brand approved by EIC) & necy connections.

SITC of 7.5 TR capacity concealed type split Air Conditioner of rated cooling capacity of 90000 BTU/hr with 3 nos twin rotary compressor , 3 nos IDU of rated power suplly 230V-1Ph-50 Hz, 1no ODU of rated power supply -400V, 3Ph-50Hz. Air flow/per IDU-1000CFM(Make- Hitachi/O-General/Mitsubishi/Daikin)

Supply, installation & Commissioning of hard/soft copper refrigerent pipe line with 9mm nitral rubber insulation and Al foil tape complete with fittings,elbows bends, supporting arrangements on wall (Make- Ryoku/Rajco/Nippon)

Liquid Line(3/8" OD with 0.6mm thick)

Suction Line(5/8" OD with 0.7mm thick)

Suppying , Fabricating & Fixing MS u- Channel of 6mm thick of Size (75mmx40mmx40mm) for making platform for Installation of outdoor unit of 7.5 TR Concealed split ACI Incl. drilling 2 nos holes in each channel incl. cutting holes into the wall & grouting the same with cement concreate(1:1 1/2:3)e etc. fabricated with horizontal angle of 25mm x25mm x6mm incl. supporting angle 50mmx50mmx6mm in each platform. The platform should be fabricated & safe for ODU Maintenance . Area of the platform is 3mtr x1.2 Mtr or as per Machine configuration & load with adequate service access as per direction of EIC.

Supply and Fixing Al powder coated Grill (Make-Primer/Air kolkata)

Charges for Trap door made of Aluminiun channel & ACP sheet for IDU maintenance

Supply & laying drain water piping work out of UPVC/HDPE hard pipes (Make- HB/Supreme/oriplast) incl. fitting , accessories bends, elbows, tees, flanges, tapings etc. 25mm hard PVC pipe (Heavy type) for water drainage.

Charges for drop ceiling to cover the Indoor units made of ACP 3 mm thick( Make Audecor or PWD approved)

Supply & Laying, 1.1 Kv Grade unarmoured Pvc Insulated Copper cable having following numbers of core of following sizes [Make Polycab / RR /KEI/ Havells] in prelaid conduit pipe & making necy connecion as per direction of EIC

3 Core 2.5 Sqmm

4 Core 2.5 Sqmm

SUPER BUILDERS (BID ID -6531189)

M/S TECHNO INDIA (BID ID -6515739)