Tubewell repairing at all samsad area of Debipur Gram Panchayat Phase 1 Activity Code 97775464

Supplying of different spare parts for reparing and maintenance purposes of tubewells under Debipur G.P. (Exluding GST & L.W.Cess)

Supplying, fitting and fixing Submersible of approved make (for 50 mm or 40 mm dia. tube well). (Market Rate ) (1.5 Horsepower,Brand-Kirloskar/Crompton Greaves) with all Electrical arrangements like Panel board,adopter with approx 10 mtr. Electrical Wire cable with Switch Board. (Market Rate ) Brand-Kirloskar/Crompton Greaves

Supply of 32 mm dia G.I. Pipe Tata Medium (10 ft length each)

Supply of 40 mm dia G.I. Pipe Tata Medium (10 ft length each)

Supply of PVC pipes & fittings(medium duty) confirming to ASTDM- 1785 and threated to match with G.I. pipes 1)PVC pipes 32mm dia.

40 mm Pipe socket (G.I.)

32 mm Pipe socket (G.I.)

Supply of PVC pipes & fittings(medium duty) confirming to ASTDM- 1785 and threated to match with G.I. pipes 1)PVC pipes 40 mm dia.

Supply of PVC pipes & fittings(medium duty) confirming to ASTDM- 1785 and threated to match with G.I. pipes 1)PVC socket 32mm dia medium quality.

Supplying Brass Check Valve (Vertical),25mm.

Supplying PVC Check Valve (Vertical),25mm.

Supplying popular Maya pump no.6 or similar(Mandir head) 40mm dia cylinder type complete set.

Supplying of Base of pump no.6 , 40mm dia cylinder type.

Supplying only Mandir Head of popular Maya pump no.6 , 40mm dia cylinder type.

Supplying only Handle of popular Maya pump no.6 , 40mm dia cylinder type( Heavy Duty).

M-II Hand pump Complete Set ( For 40mm dia TW cylinder type)

Supplying of Guide Bush for Mark-II Tubewell.

Supplying of 12mm dia.piston rod

Supplying of complete Chain set for Mark –II hand pump set.

Supplying of bearing for Mark-II hand pump set.

Supplying of 12mm dia.M S connecting rod including rod socket.3.0m.Length.

Supplying of MS rod socket for 12mm dia.connecting rod including.

Supplying,fiting and fising 65mm dia.deep well brass cylinder.

Supplying,fiting and fising 65mm dia.deep well cast iron cylinder.

4” PVC Bucket.

2.5”PVC Bucket for cylinder.

4” Leather Bucket.

2.5” Leather Bucket for cylinder.

Plunger with valve (brass).

Plunger valve (brass).

Plunger rod.

White Zink.50 Gm PACK.

Nut bolt requird for TW (Mentioned size before putting rates)

“S” Clip

Seat Valve

Bearing

Shaft

Chain

40mm Brass Check Valve

½”x1½” Nut Bolt

40mm 1½” G.I. Short Piece

2”x½” Nut Bolt

½”x3” Nut Bolt

½”x2½” Nut Bolt

3/8 x1½” Nut Bolt

3/8x2” Nut Bolt

½” Washer

3/8 Washer

32 mm G.I. Short Piece.

32 mm Brass Check Valve

Labour rates for repairing of 40 x 80 mm deep TubeWell Cylinder incl. opening,removing ,repairing damaged parts & re fixing and making the Tubewell in running condition.

Labour for replacing any part of Tubewell body, in/c opening & removing/repairing damaged parts & fixing & making the TW in running condition.

Repairing or replacing of 40mm dia connecting rods TW cylinder, includes opening & removing/repairing damaged parts & refixing and making the TW in running condition.

Bucket washing of 40/50 mm x 100mm dia Mark-II TW includes Hire & Labour charges all necessary equipments,in/c cost of bleaching powder,bucket,includes opening & refixing and making the TW in running condition.

Compressor washing of 40/50 mm x 100mm dia Mark-II TW includes Hire & Labour charges all necessary equipments,in/c cost of bleaching powder,bucket,includes opening & refixing and making the TW in running condition.

Skilled labour (Mistry)

Un-skilled labour (Labour)