Foyer Upgradation work (False Ceiling, Wall paneling, Signages, Seating, Flooring, Lift, Lighting) at Udhyog Bhavan gandhinagar

Foyer Upgradation work (False Ceiling, Wall paneling, Signages, Seating, Flooring, Lift, Lighting) at Udhyog Bhavan

Sr. No. Quantity Item Description Rate Amount

Replacing old & u/s by new Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push &

1 accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

1382.00 Pt. 485.81 Eighty Five &

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires, in below type of pipe to be erected

2 complete with earth continuity and necessary connection with primary light with

accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for

Secondary Point.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

744.00 Pt. 132.31 Thirty Two &

wall/ceiling complete

Replacing old & u/s by new Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

3 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on

/ in wall / ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

202.00 Pt. 711.04 Eleven &

Replacing old & u/s by new Point wiring for on board Looped Plug with 6A Modular type switch &

5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with following type

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box,

5 single mounting base frame covered with textured / metallic/white front plate , modules erected Paise only

with necessary connections as per site situation directed by Engineer In charge.

(7) Blank Plate Single Paise only

25.00 No. Cat.III 101.00 Hundred One

Replacing old & u/s by new Replacing old & u/s by new Providing and erectingISI mark Medium

class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia

of pipes, in approved manner as directed

200.00 Mtr. (c) 32 mm 54.54 Four & Paise

Fifty Four only

Replacing old & u/s by new Replacing old & u/s by new Providing & erectingPVC Corrugated

7 Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following Paise only

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid

material with ignition free and flame proof confirming BS with necessary end caps Internal and

external bend, flat bends, coupler, tee etc..All necessary accessories and measuring of following

100.00 Mtr. (2) 100 mm x 50 mm trunking 428.24

Replacing old & u/s by new Replacing old & u/s by new Providing and erectingMains with 1.1 KV

grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories Paise only

Replacing old & u/s by new Replacing old & u/s by new Providing and erectingMains with 1.1 KV

grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories Paise only

300.00 Mtr. (a) 2 wire 4 sq. mm 112.11 Twelve &

Replacing old & u/s by new Replacing old & u/s by new Providing and erectingMains with ISI

marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant

11 PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically Paise only

for control panel, relays, power switchgears, motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required.

860.00 Mtr. (e) One wire 6.00 sq. mm 56.56 Six & Paise

350.00 Mtr. (f) One wire 10.00 sq. mm 91.91

500.00 Mtr. (g) One wire 16.00 sq. mm 142.41 Forty Two &

100.00 Mtr. (h) One wire 25.00 sq. mm 236.34 Thirty Six &

40.00 Mtr. (i) One wire 35.00 sq. mm 300.98

80.00 Mtr. (j) One wire 50.00 sq. mm 470.66 Seventy &

Paise Sixty Six

Replacing old & u/s by new Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV Paise only

1547.00 No. Cat-lll 589.84 Eighty Nine &

(iv) 22-24 watts, Surge-2 KV Paise only

384.00 No. Cat-lll 758.51

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing

(vi) 36 watts, 24" x 24", Surge- 2KV Paise only

102.00 No. Cat-lll 1794.77 Hundred

656.00 No. (H) Mirror Light 9 Watts, wall mounted minimum 1 feet long 312.09 Twelve &

(I) Adjustable spot light with COB led having aluminium reflector of following wattage Paise only

(ii) 12 Watts Paise only

173.00 Ea. Cat-lll 966.57 Six & Paise

Replacing old & u/s by new Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminium housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses

13 with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, Paise only

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iii) above 24 to 36 watts Paise only

250.00 No. Cat-lll 2201.80 Two Hundred

Replacing old & u/s by new Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

14 with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Paise only

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection.

(iii) Above 60 to 90 watts Paise only

30.00 No. Cat-lll 5976.17 Seventy Six &

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and Paise only

accessories wired upto terminal block.IP

(ii)32-40W Paise only

20.00 No. Cat-lll 4819.72

Supplying, Installation, testing & erecting of 36W LED Building Illuminating Linear Luminaire (IP65)

grazers, made using Powder Coated Die-Cast Aluminium Housing, High Power LED and Internal

15 50.00 No. Driver as per the drawing. All the work shall be done as per instruction given by EIC and as per 25795.75

Approved tender make list with all relevant IS codes.

GRAZER LIGHT, PS_36W FLOED BUILDING UPLIGHTER - 8D - OSRAM - IP66 - 3000K

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

68.00 No. ICS=100% of ICU only Cat III 6173.12

Replacing old & u/s by new Replacing old & u/s by new Providing and erectingApproved make

Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having

16 normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply Paise only

50 c/s. with all internal connections, spreader tinned copper & complete erected in existing

G.M.S. housing.

30.00 No. ICS=100% of ICU only Cat III 8055.76 Fifty Five &

Replacing old & u/s by new Replacing old & u/s by new Providing and erectingApproved make

Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having

17 Normal current rating 200A.with variable Thermal & magnetic release suitable to work on Paise only

A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S.housing

16.00 No. ICS=100% of ICU only Cat III 16221.61 Two Hundred

Replacing old & u/s by new Providing and erectingApproved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. and above at 415 V . having normal current rating

250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

25.00 No. ICS=100% of ICU only Cat III 20946.39 Nine Hundred

Providing and erectingApproved make Earth fault Relay suitable to mount with inter connection

suitable to following size of moulded case circuit breaker having CT ratio & MCCB rating as

following along with shunt trip 220V AC. with all internal connections & complete erected in

existing M.S.housing..

Replacing old & u/s by new Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating

tape for phase sequence of following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.

30.00 Rn.Mtr (B) Suitable for 200 Amp. capacity 3202.71

41.00 Rn.Mtr (C) Suitable for 300 Amp. Capacity 4909.61 Nine Hundred

Replacing old & u/s by new Providing and erectingMiniature circuit breaker single pole 0.5A to 2A

21 system and having breaking capacity 10 KA to be erected in existing box. confirming to IS Paise only

8828/1996 with ISI Mark

30.00 No. Cat.III 270.68 Seventy &

Replacing old & u/s by new Providing and erectingMiniature circuit breaker single pole 6A to 25A

22 suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in Paise only

existing box. confirming to IS 8828/1996 with ISI Mark

422.00 No. Cat.III 112.11 Twelve &

Replacing old & u/s by new Replacing old & u/s by new Providing & erecting240 V MCB double

23 pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS Paise only

: 8828 in existing box having following capacity

(A) 6 to 32 Amp. Paise only

21.00 No. Cat.III 299.97 Ninety Nine &

Replacing old & u/s by new Replacing old & u/s by new Providing & erecting415 V MCB Four Pole

24 for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in Paise only

existing box having following capacity

(b)40 Amp. Paise only

1.00 No. Cat.III 668.62

(c)63 Amp. Paise only

212.00 No. Cat.III 737.30 Thirty Seven

Replacing old & u/s by new Providing & erecting415 V MCB three Pole for Motor & Inductive

25 Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having Paise only

following capacity

(a) 6 to 32 Amp. Paise only

0.00 No. Cat.III 587.82 Eighty Seven

26 10.00 No. Half / One Module Blanking Plate of Standard Size. 9.09 & Paise Nine

Replacing old & u/s by new Providing and erectingSheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms

to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing Paise only

(b) sheet steel double door (IP-43) Paise only

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) Paise only

(b) sheet steel double door Paise only

28 The Above all items of MCB, DB the cost of erection on New angle iron frame add following. Paise only

23.00 No. [A] up to 8 way single phase 163.62

1.00 No. [B] above single phase 8 way and all three phase DBs. 248.46 Forty Eight &

Paise Forty Six

Providing and erectingSheet Steel powder coated Vertical MCB distribution board (VTPN) - flush /

surface mounted double door (IP54) fitted with copper insulated busbar, isolated neutral bar,

29 earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP TPN Paise only

MCCB + RCCB as incomer and three phase outgoing as per following .(The DBs should be used of

same company of MCB to be used)

8.00 No. (B)6 way outgoing 6497.33

Providing and erectingApproved make RCCBs conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as directed

(i) 25 Amps.DP Paise only

3.00 No. Cat. III 1969.50 Nine Hundred

Paise Fifty only

(ii) 40Amps. DP Paise only

23.00 No. Cat. III 2235.13

Replacing old & u/s by new Providing & erectingMedium Voltage Danger Notice Board sticker as Twenty Six &

per language suggested by engineer incharge of standard size as per IS-2551 Paise Twenty

Replacing old & u/s by new Providing and erectingrequired size HOT deep Galvanised iron strip for

earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.

Replacing old & u/s by new Providing and erectingHOT deep Galvanised iron strip wire 8 to

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover. (A)(approved make OEM has

to submit test certificate including value of earth resistance of installation duly stamped and

signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

25.00 No. Length of pipe - 1 Mtr 4591.46

Back filling compound - 1 Nos Bag of 15 Kg.

Paise Forty Six

Providing & erectingweather proof, dust & vermin proof, floor mounted front operated indoor

type cubical panel board necessary IP-42 and above protection as per approval from engineer

incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger

notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy

powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall Paise only

be supplied with following approved manufacturers with following size.

(A) locally fabricated panel board Paise only

71.00 Sq.Mtr (i) with 350 mm depth 10468.65

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating Rupees

proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, Seventy Seven

36 3000.00 Kg. welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per 77.77 & Paise

direction of engineer in charge with necessary grouting, cementing, plastering & finishing Seventy Seven

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated outdoor

type double door cubical panel board necessary IP-54 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger

notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy

powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall Paise only

be supplied with following approved manufacturers with following size.

(A) locally fabricated panel board Paise only

4.00 Sq.Mtr (i) with 350 mm depth 11466.53

Replacing old & u/s by new Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

38 multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Paise only

existing trench / pipe of following size of cables

279.00 Mtr. (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 183.82 Eighty Three

428.00 Mtr. (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 220.18 Twenty &

1028.00 Mtr. (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 284.82 Eighty Four &

1103.00 Mtr. (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 378.75

585.00 Mtr. (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) 490.86 Ninety &

1105.00 Mtr. (G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) 731.24 Thirty One &

Replacing old & u/s by new Providing and erectingXLPE (IS:7098)(I)-88 ISI armoured cable

39 multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or Paise only

in existing trench / pipe of following size of cables

2700.00 Mtr. (B) 4 core 6 Sq. mm 126.25 Twenty Six &

4280.00 Mtr. (C) 4 core 10 Sq. mm 140.39 Forty & Paise

Replacing old & u/s by new Providing and erectingXLPE (IS:7098)(I)-88 ISI armoured cable

40 multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Paise only

existing trench / pipe of following size of cables

200.00 Mtr. (A) 4 core 16 Sq. mm 153.52

100.00 Mtr. (B) 4 core 25 Sq. mm 190.89 Ninety &

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all

41 200.00 Mtr. 55.55 Five & Paise

over the run and back filling the same and making the surface as normal ground.

Fifty Five only

Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding power

supply by making up to following size of holes at both ends complete.

20.00 Mtr. (A) Up to 100 mm bore dia Ninety Two &

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material

at required depth in existing trench for laying of cable. below ground / road surface for enclosing

200.00 Mtr. (A)50 mm outer dia Two & Paise

50.00 Mtr. (C))90 mm outer dia

Replacing old & u/s by new Providing and, fixing heavy duty flange type brass cable gland with

44 rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for Paise only

following size of cables.

10.00 No. (E) 2 to 4 core 25 Sq. mm 51.51 One & Paise

Replacing old & u/s by new Providing and, fixing heavy duty flange type brass double compression

45 type cable gland with rubber ring for PVC insulated armoured cable complete with out going Paise only

tails, insulating tape etc for following size of cables.

100.00 No. (A) 3 & 1/2 / 4 core 25 Sq. mm 66.66 Six & Paise

45.00 No. (B) 3 & 1/2 core 35/50 Sq. mm 75.75 & Paise

28.00 No. (D) 3 & 1/2 core 95 Sq. mm 131.30 Thirty One &

48.00 No. (F) 3 & 1/2 core 150 Sq. mm 190.89 Ninety &

8.00 No. (H) 3 & 1/2 core 240 Sq. mm 247.45 Forty Seven &

Replacing old & u/s by new Solder less crimping type Aluminium lugs conforming to IS suitable for

46 cable of following size evenly crimped with high pressure tool & connected to switchgear Paise only

terminals with brass/cadmium plated nut bolts in an approved manner.

112.00 No. (F) 95 Sq.mm. 40.40 & Paise Forty

192.00 No. (H) 150 Sq.mm. 61.61 One & Paise

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The

cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be

47 coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler Paise only

plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary

support( included) as per Specification and as per instruction of engineer in charge..

400.00 Rmt. (3) 150 X 50 X 1.6 mm Thick 424.20 Twenty Four

Providing and fixing approved make 'T' Junction for Perforated C type cable tray. Made from

sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip

48 galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and Paise only

GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and

as per instruction of engineer in charge of following size

25.00 (3) 150 X 50 X 1.6 mm Thick Eighty Four &

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from

sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip

49 galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and Paise only

washers etc. erected on existing support as per Specification and as per instruction of engineer in

30.00 (3)150 X 50 X 1.6 mm Thick 90° Elbow

Providing and fixing approved make 'Cross over Junction' for Perforated C type cable tray. Made

from sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot

50 dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate Paise only

and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification

and as per instruction of engineer in charge..

5.00 (3) 150 X 50 X 1.6 mm Thick Cross Junction Forty Four &

Providing and fixing approved make Ladder type cable tray. Made from M.S sheet. The cable tray

should be bended as per IS 2062/1079 shall be fabricated of double bended channel section

longitudinal members with single bended Channel section. Rungs of members welded to the base

51 of the longitudinal members at 250 mm c/c spacing . as per IS and shall be coated with hot dip Paise only

galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and

washers etc. erected on existing support as per Specification and as per instruction of engineer in

750.00 Mtr. (6) 600 X 50 X 2.0 mm Thick 471.67 Seventy One

Providing and fixing approved make 'T' Junction for ladder type cable tray. Made from M.S sheet

steel. The Junction should be bended as per IS 2062/1079. with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erected on existing support as per Specification and as

per instruction of engineer in charge..

T' Junction Paise only

30.00 (3)300 X 50 X 2.0 mm Thick 'T' Junction Five & Paise

50.00 (6) 600 X 50 X 2.0 mm Thick 'T' Junction Seventy One

Providing and fixing approved make '90° Elbow' for ladder type cable tray. Made from M.S sheet

steel. The Junction should be bended as per IS 2062/1079. with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erected on existing support as per Specification and as

per instruction of engineer in charge..

Fifty Nine only

Providing and fixing approved make 'Cross over Junction' for ladder type cable tray. Made from

sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip

54 galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and Paise only

washers etc. erected on existing support as per Specification and as per instruction of engineer in

Replacing old & u/s by new Supplying & erecting approved make low noise decorative exhaust fan

having square frame ABS body with inbuilt lowers & square frame.

184.00 No. 250mm with 1350 RPM Cat.II 1366.53 Hundred Sixty

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for

56 mounting mob & hinged doors as per requirement having locking arrangements with mounting Paise only

clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of

following size of box.

30.00 No. (C)150mm x 125mm x 100mm [deep] 476.72 Seventy Six &

Supplying and erecting B class Galvanized iron pipe having smooth finished bore of the pipe on

57 both ends erected nuts and bolts along the pole / wall shaping the pipe as per site requirement. Paise only

Pipe dia as following.

15.00 Mtr. (A) 25 mm dia 180.79 Eighty & Paise

Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 cm long duly welded on Hundred

58 250.00 No. 20 cm x 20 cm x 3 mm thick M.S. base plate, erected on wall or corner for mounting street light 343.40 Forty Three &

luminaire with necessary hardware materials duly painted. Paise Forty

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED

59 71.00 display, 0 to 750 AC Volts range erected on existing panel board with all connection, wiring etc

.with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED Thousand Five

display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , Hundred Fifty

erected on existing panel board with all connection, wiring etc .with manufacturers calibration Eight & Paise

certificate. Forty Three

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on

61 71.00 Seventeen &

existing panel board with necessary connections.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA Seventy Four

burden erected in existing CRCA box duly secured with insulating materials connected to the meter & Paise

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, Three & Paise

complete erected with necessary connections. Forty Three

Rupees One Crore Fifty One Lac Ninety One Thousand Four Hundred Seventeen & Paise Fifty Eight only

Dy.Exe.Engineer Executive Engineer

Signature of Contractor Sach.Comp.Ele.Sub.Div.No-3 Sach.Comp.ele.Div

Gandhinagar Gandhinagar

Foyer Upgradation work (False Ceiling, Wall paneling, Signages, Seating, Flooring, Lift, Lighting)

at Udhyog Bhavan gandhinagar

I/We am/are willing to carry out the work at _________________% ( Should be

written in figures and words) Below / above the tendered rates mentioned above.

My/Our tender works out as under :-

A Estimate Amount Estimate Amount

put to tender RS.________________ put to tender RS.________________

Total RS. RS.________________ Total RS. RS.________________

Net RS (In Words) Rupes___________ Net RS (In Words) Rupes___________

b Dismentle amount Dismentle amount

Amount of D.M. will be consider highest quoted rates by other agency of any

other than lowest & minimun cost Rs.183900.78 DM will be recovered as estimate cost

put to tender RS.________________

Total RS. RS.________________

Net RS (In Words) Rupes___________

1 I/We hereby declare that I/we have visited the site and fully acquainted

myself/ourselves with the local situation regarding materials & other factors

pertaining to the work before submitting this tender.

2 I/We hereby declare that I/we have carefully studied conditions of contract, .

specifications & other tender documents of this work and agree to execute

the same accordingly.

3 A' tender with any cressure or overwritting in percentage (both in words & figures)rejected outrightly

4 Insertions and/or corrections in the percentage quted (both in figures & words) resulting into increse

5 Dismental handed Over to The Agency and amount will be deducted from Agency's bill

S.C..Elect.Sub.Div-1.

Singnature of Contractor Deputy Executive Engineer Exe.Engi.

S.C..Elect.Sub.Div-1.

S.C.E.Sub.Div.No.3 S.C.E.Div.

Gandhinagar Gandhinagar.

List of Dismantling Material

Foyer Upgradation work (False Ceiling, Wall paneling, Signages, Seating, Flooring, Lift, Lighting) at Udhyog Bhavan

Sr.No. Quantity Item Description Rate Amount

cost of old and u/s various size of LED Lights 22-24

1 994 nos 30.04 & Paise Four

watts, Surge-2 KV

2 1 Lot 3.5CX25 SQ MM AL ARM CABLE 2,600.00

3 1 Lot 3.5CX35 SQ MM AL ARM CABLE 5,000.00

4 1 Lot 3.5CX50 SQ MM AL ARM CABLE 18,000.00 Eighteen

5 1 Lot 3.5CX70 SQ MM AL ARM CABLE 19,000.00 Nineteen

6 1 Lot 3.5CX95 SQ MM AL ARM CABLE 12,900.00 Thousand

7 1 Lot 3.5CX150 SQ MM AL ARM CABLE 37,800.00 Thousand

8 1 Lot 3.5CX240 SQ MM AL ARM CABLE 19,000.00 Nineteen

cost of old and u/s Modular type Switches , Plug, and Rupees Two

Other Miscellaneous Items Thousand only

10 1 Lot cost of old and u/s various size of wires 2,000.00

11 1 Lot cost of old and u/s various size of pipes 1,000.00

12 1 Lot cost of old and u/s MCP SP 500.00

13 1 Lot cost of old and u/s MCP DP 800.00

14 1 Lot cost of old and u/s MCP FP 1,200.00

15 22 nos cost of old and u/s MCCB FP upto 125A 518.44 Eighteen &

16 19 nos cost of old and u/s MCCB FP upto 200A 1,043.97 Forty Three &

17 1 lot cost of old and u/s Al Busbar 1,000.00

18 12 nos cost of old & u/s exhaust fan 87.95

Total Dismantle Amount

Signature of Dy.Ex.Engineer Executive Engineer

Contractor Sach.Comp.Elect.Sub.3 Sachivalaya Comp.Ele.Disn,

Gandhinagar. Gandhinagar