Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹64.8 LAccepted-AOC 1ST FLOOR T C 24 95 VEENA TOWER AMBALAMUKKU KOWDIAR P O THIRUVANANTHAPURAM KERALA THIRUVANANTHAPURAM KERALA 695003 | THIRUVANANTHAPURAM | KERALA | 695003 | L1 | Accepted-AOC L1 | |
| 2 | L2₹68.4 L+₹3.6 L (5.55%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹70.4 L
EMD Value
₹50,000
Closing Date
2 Feb 2023, 3:00 pmClosed
Executive Engineer
Executive Engineer, Electronics Division Thiruvananthapuram
Supply and Installation of PA System at Banquet Hall, PA System and TV in Fourth Floor Conference Hall, PA System, Projector and TV at Mini Conference Hall of Govt. Guest House, Thycaud , Thiruvananthapuram
2023_PWD_552601_1
28/EEELSTVM/2022-23
Open Tender
Miscellaneous Works
Item Rate
60 days
Thiruvananthapuram
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,750
₹50,000
15 May 2023
25 Jan 2023
4 Feb 2023
25 Jan 2023
2 Feb 2023
25 Jan 2023
25 Jan 2023 - 2 Feb 2023
Amount
Supply, Installation, Testing and Commissioning of Passive Multiple Driver Column Array EN54, Loudspeaker consisting of minimum 7 x 3.5" full range drivers with minimum 150 W RMS Power @ 8 Ohms, Frequency Response(±3 dB) 150 Hz - 11 kHz, Frequency Range (-10 dB) 110 Hz - 14 kHz, Sensitivity 90 dB or better, 130 degrees horizontal dispersion, PAN/Tilt bracket for mounting etc. Preferred Make: BOSE, QSC, Tannoy, Turbosound or equivalent or higher
Supply, Installation, Testing and Commissioning of Dual Channel rack mountable Commercial Class D Amplifier with Energy Star Certification delivering 2 x 240 W @ 4/8 Ohms and 70V/100V,distortion <0.05%,Frequency response 20 Hz to 20 kHz, +0.5 / -1 dB,Signal-to-noise >97 dBA. Preferred Make : Lab Gruppen, Powersoft, QSC or equivalent or higher
Supply of Discussion Unit with 50cm gooseneck length microphone fully compatible with the existing conference table, as Chairman unit, Support daisy chain Cat-6 topology, Supporting microphone modes of Open, Override and VOX (voice activation) with ON/OFF buttons,Prior and next-in-line buttons on the front plate, Shielded microphone, immune to mobile phone interference, integrated loud speaker etc., Ring LED on the microphone, Fully compatible with the CCU, microphone Transducer type: electret (condenser), microphone Polar pattern: Unidirectional cardioid, Frequency response: 25 Hz-15 K Hz, 3 years OEM onsite warranty. Accepted make: Televic, Shure, TOA, Sennheiser
Supply of Discussion Unit with 50cm gooseneck length microphone fully compatible with the existing conference table, as Delegate unit, Support daisy chain Cat-6 topology, Supporting microphone modes of Open, Override and VOX (voice activation) with ON/OFF buttons on the front plate, Shielded microphone, immune to mobile phone interference, integrated loud speaker etc., Ring LED on the microphone, Fully compatible with the CCU,microphoneTransducer type: electret (condenser), microphone Polar pattern: Unidirectional cardioid, Frequency response: 25 Hz-15 K Hz etc. with sufficient no of 2m inter connecting cable ( Shielded), 3 years OEM on site warranty. Accepted make: Televic, Shure, TOA, Sennheiser
Supply of Digital Central Control Unit for controlling up to 50 conference microphone units with suitable power supply and License (Life long) and can be expanded to cover minimum 150 units , Should support (chain) redundancy in single or multiple chains using Cat-6 communication ports. Should support different discussion modes and Web browser control support, should include built-in DAFS, MP3 USB recorder, Analog audio input and o/p etc., fail safe redundancy technology, acoustic feed back reduction,Frequency response:25 Hz to 15 KHz, Input: 1 balanced XLR, one unbalance RCA, Output: 2 unbalanced RCA, Min 3 years OEM on site warranty Accepted make: Televic, Shure, TOA, Sennheiser
Supply and Installation of Custom made flight case to store and transport minimum 10 nos deligate/chairman units, microphones, cables and control unit.
Supply, Installation, testing and commissioning of Dual Channel Power Amplifier 2 X 150 Watts @ 100V / 4 Ω, Frequency Response (± 3 dB) 20 Hz - 20 kHz, Bridge Mode 1 X 300 Watts @ 8 Ω , Class D Amp Topology ,Signal / Noise > 90 dB, THD+N (@ 1 kHz) < 0.1% (1/2 Rated Power), Crosstalk (@ 1 kHz) > 70 dB Convection Cool, 1 U 19" Rackmountable. Approved Make: Audac, TOA, Apart, RCF, Yamaha
Supply, Installation, testing and commissioning Design cabinet speaker, 4" coated paper cone woofer, 1" dome tweeter, 30Watts RMS@ 16Ω ,Sensitivity (1W/1m) 86 dB, Dispersion (H/V) 130° or better with 30° incline mounting bracket. Approved Make: Audac, TOA, Apart, RCF, Yamaha
Supply and Installation of rack moutable Digital Player / recorder, MP3 recorder player with USB,SD,MMC card and bluetooth 120 W RMS 5 Mic & 2 Aux, Pre-Amp output in Stereo/Mono Mode. And necessary cables with connectors for connecting the mixer Preferred Model:Ahuja, POPE, Studio master or equivalent or higher
Supply, Installation, Testing and Commissioning of 12-Input Mic/Line Rack mountable Mixer having 8 Mic Preamps, 2-band Eqs, 2 stereo Line Inputs, Switchable +48 V phantom power for condenser microphones, Mic Signal-to-noise ratio: -110 dB / -112 dB A-weighted, Signal-to-noise ratio: 110 dB / -112 dB A-weighted etc. Preferred Model: Behringer, Yamaha or equivalent or higher
Supply, Installation, Testing and Commissioning of rack mountable distribution splitter that splits two inputs into eight outputs, each input and output has a balanced XLR connector, 8 output channels each featuring independent level controls, 5 segment LED meters for each ouutput to indicate signal activity, Frequency Response 10Hz - 75kHz, Signal to Noise Ratio > 97dB, dynamic range:117 db etc. Preferred Model: Australian Monitor, Behringer, Kramer or equivalent or higher
Supply, Installation, Testing and Commissioning of dual channel Wireless Hand held Microphone System having dynamic cardoid pick up pattern or better, Input Sensitivity: 1.8 mV / Pa, frequency response 55 - 16,000 Hz, S/N Ratio ≥ 103 dBA, Switching badwidth up to 24 Mhz, 2 channel diversity reception, Wideband FM Modulation, Automatic frequency management„ etc. Preferred Make: Sennheiser, Shure or equivalent or higher
Supply, Installation, Testing and Commissioning of Wireless Lavalier Microphone System having Condenser type Microphone with Omni-directional pick up pattern, RF Output Power 10 mW, Frequency response 50 - 16,000 Hz, THD ≤ 0.9%, S/N Ratio ≥ 103 dBA, Switching badwidth up to 24 Mhz, Wideband FM Modulation, Automatic frequency management, External antennas, True diversity receiver with metal housing, etc. Preferred Make: Sennheiser, Shure or equivalent or higher
Supply and Installation of Gooseneck pre polarised Condensor Microphone having Frequency Response: 40-20,000Hz, Sensitivity: 5.5mV/Pa, Equivalent noise level 26 dB(A) Power Required: 12V-48V DC, Acoustics pressure gradient transducer(microphone head), Overall Length: 23”, double bend etc. Preferred Make: Sennheiser, Shure or equivalent or higher
Supply and Installation of Gooseneck pre polarised Condensor Microphone having Frequency Response: 50-20,000Hz, Equivalent noise level 26 dB(A), maximum SPL: 130 dB or better, RF shielding against intermodulation from wireless signal, Power supply Required: 12V-48V DC, Acoustics pressure gradient transducer, Overall Length: minimum 450mm, double bend etc. Preferred Make: Sennheiser, Shure or equivalent or equivalent or higher
Supply and Installation of Gooseneck Microphone Base having sturdy wired table stand that provides a stable base for XLR-3 gooseneck microphones with a user-friendly microphone button with a two-color status display that provides quick visual feedback on whether the microphone is active or muted. Toggle on/off, Push to mute, Push to talk, permanent on, TTL logic output Preferred Make: Sennheiser, Shure or equivalent or higher
Supply and Installation of 32GB USB Pen Drive Preferred Model: HP, Sandisk or equivalent or higher
Supply and installation of Laptop having 11th generation intel core i3 processor, 8 GB DDR4 RAM, 512 GB SSD,Windows 11 Home, Intel® UHD Graphics, FHD display, HDMI, USB, RJ 45 port etc. 3 year warranty Preferred Model: HP, Dell or equivalent or higher
Supply and installation of 3LCD Ultra Short Throw Projector having WXGA 16:10 resolution, 4,000 lumens of colour and white brightness, Laser light source life (20,000-hours or better), Screen Mirroring, Throw Ratio Range: 0.28 – 0.37 or better, Zoom Ratio: 1.0 – 1.35 (Digital Zoom), Focal Length: 3.7mm or better, Connectivity: RJ45, HDMI, D-Sub, USB etc. Preferred Make: Epson, Canon, Sony or equivalent or higher
Supply and installation of Adjustable Wall Mount kit for Ultra-Short Throw Laser Displays for projecting 16:9 content etc.
Supply, Installation, Testing and Commissioning of 150" Motorized Ceiling & Wall mount projecter screen Preferred Make: Liberty, Logic, Suvira or equivalent or higher
Supply and Installation of Laser Presentation Remote Clicker with Dual Connectivity Bluetooth or USB for Powerpoint, Keynote, Google Slides, Wireless Presenter, Operating Range: min 20 meter Preferred Make: Dell, HP, Logitech or equivalent or higher
Supply and Installation of 1:4 HDMI distribution amplifier for up to 4K HDR, Video Bandwidth: Up to17.82Gbps, Max. Resolution: 4K@60Hz (4:4:4), HDCP authorization control, Compliance — HDR10, HDCP 2.2, should support forced RGB, one HDMI input, equalizes and reclocks the signal and distributes it to four identical outputs, include accessories like 19–Inch Rack Adapter, Power supply etc. Preferred Model: Kramer or equivalent or higher .
Supply and Installation of ≥75” UHD smart LED TV having Resolution: 3840x2160 (UHD), Operating Hours:16/7, 330 nits Brightness, 2.0 Ch Speaker, Connectivity: Wi-Fi, HDMI, USB, LAN, RF input etc. and OEM warranty for 3 years. Preferred Model: LG, Panasonic, Samsung, Sony or equivalent or higher
Supply and Installation of ≥55 UHD smart TV having Brightness:400 nits, Resolution: 3840x2160, HDR supported, operating Hours:16/7, Connectivity:HDMI, USB, RJ45, Wi-Fi etc. and OEM warranty for 3 years. Preferred Model: LG, Panasonic, Samsung, Sony or equivalent or higher
Supply, Installation, Testing and Commissioning of tiltable and extendable wall bracket for 75 inch or higher Display.
Supply, Installation, Testing and Commissioning of tiltable and extendable wall bracket for 55 inch or higher Display.
Supply, Installation and Fixing of XLR Box 8 sockets Module Metal Cover (XLR M/F as per site requirements)
Supply, Installation and Fixing of 24 Numbers of XLR sockets Module Metal Box ( (XLR M/F as per site requirements)
Supply of Power Extension Box with 8 x5A sockets , power indicator, ON/OFF Switch with cable length 10m 5/6A plug top 3x2.5 Sq.mm cable
Supply and fixing of UL Certified 24 port Enhanced CAT-6 12 port loaded Modular type patch panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Accepted Make: Actassi, Belden, Molex, Panduit, R&M, Systimax.
Supply and fixing of UL Certified CAT-6 Information Outlet for 1000Mbps with spring shutter / dust cover face plate + Single RJ45 Jack on concealed metal mounting box including termination charges etc. Accepted Make: Actassi, Belden, Molex, Panduit, R&M, Systimax.
Supply and fixing UL Certified CAT-6 Information Outlet for 1000Mbps with spring shutter / dust cover dual face plate + Two RJ45 Jack on concealed metal mounting box including termination charges etc. Accepted Make: Actassi, Belden, Molex, Panduit, R&M, Systimax
Supply and Installation of 19", floor standing ≥24U (600 x 600 ) audio Rack with four numbers of Caster wheels and having Accessories like 3nos of supporting trays, 4 no's of cooling fan, power strip with spike arrester for 7 sockets(min). Accepted Make:Dlink, Legrand, Netrack, President, Valrack .
Supply and Installation of 19", floor standing 17U (600 x 600 ) audio Rack with four numbers of Caster wheels and having Accessories like 3nos of supporting trays, 4 no's of cooling fan, power strip with spike arrester for 7 sockets(min). Accepted Make:Dlink, Legrand, Netrack, President, Valrack .
Supply and fixing 19'', 9U floor standing audio Rack with four numbers of Caster wheels and having ACDB 6 port, cable manager, sufficient no of trays, cooling fan etc. suitable for the aesthetic look of interior.
Supply , fixing and laying of Twenty Four core audio snake cable with specials conforming to ISI standard on surface using existing conduits
Supply , fixing and laying of Eight core audio snake cable with specials conforming to ISI standard on surface using existing conduits
Supply , fixing and laying of Four core audio snake cable with specials conforming to ISI standard on surface using existing conduits
Supply, Installation and fixing of 2 core Sheilded PVC Insulated Microphone cable with Ultra low Capacitance 60(Pf/m) ; Outer Jacket : PVC Matt; Working Temperature: 20 °C / +70 °C ; Diameter : 6.5mm; extreamly flexibel as per the tender specifications. Preferred Make: Belden, Klotz, Gotham or equivalent or higher.
Supply, Installation and Fixing of XLR Jack connectors (XLR M/F as per site requirements) Preferred Make: Neutrik or equivalent or higher.
Supply, Installation and Fixing of Phono Jack connectors Preferred Make: Neutrik or equivalent or higher.
Supply, Installation and Fixing of EP connectors Preferred Make: Neutrik or equivalent or higher.
Supply and installation of 5 meter EP to Phono/XLR Cable as per site requirements
Supply and installation of 15 meter EP to Phono Cable/XLR Cable as per site requirements
Supply and Laying of 2 core 2.5 Sq.mm Speaker Cable Preferred Make: Belden or equivalent.
Supply and fixing of 20mm medium PVC ivory conduit/oval/capping casing with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required. Preferred Make: Balco,Toms, Espee or equivalent
Supply and fixing of 25mm medium PVC ivory conduit/oval/capping casing with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required.Preferred Make: Balco,Toms, Espee or equivalent
Supply and fixing of 32mm medium PVC ivory conduit/oval/capping casing with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required. Preferred Make: Balco,Toms, Espee or equivalent
Supply, laying, certification and documentation of UL certified CAT-6 UTP cable 23 AWG through the existing conduit and cassing and capping as required. Accepted Make: Actassi, Belden, Molex, Panduit, R&M, Systimax.
Supply and Installation of 20m control cable( Shielded ) Compatible for above system (OEM make of conferenece unit)
Supply and Installation of 10m control cable ( Shielded ) Compatible for above system (OEM make of conferenece unit)
Supply and Installation of OEM make 5m inter connecting cable ( Shielded ) for the delegate units compatible with it. (OEM make of conferenece unit)
Supply and Installation of HDMI Wall Plate on concealed metal mounting box Preferred Model: Kramer or equivalent or higher.
Pop-up type flush-mounting boxes - installed in floors Conform to IEC 60670-1, IEC 60670-23 and IEC 60884-1 with RJ 45 jack, HDMI socket, audio jack etc. with necessary cables for connecting. Preferred Model: Legrand or equivalent or higher.
Supply and Installation of ≥1.8m HDMI Cable with gold–plated connectors Preferred Model: Kramer or equivalent or higher..
Supply and Installation of 3m HDMI Cable with gold–plated connectors Preferred Model: Kramer or equivalent or higher.
Supply and Installation of ≥4.6m HDMI Cable with gold–plated connectors Preferred Model: Kramer or equivalent or higher.
Supply and Installation of 10m HDMI Cable with gold–plated connectors Preferred Model: Kramer or equivalent or higher.
Supply and Installation of Active High Speed HDMI Cable with Ethernet of length 20 meter having video resolution up to Video Resolution: up to 4K, High Data Transfer Rate - up to 18Gbps, High–quality Connectors: 24K gold–plated, corrosion–resistant connectors offer the best possible connectivity etc Preferred Model: Kramer or equivalent or higher.
Charges for electrification as per ISI standard (Wiring, module box and power sockets etc. As per requirement) for the rack
Systronics (India) Ltd , Telerad Division
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .