Provisioning of new office and laboratory furniture items

Supply of Officer table of size 2000 x 1050 x 750 mm with one side pedestal unit and E.R.U. Table top material MDF board of grade SBG II of IS 12406/Latest. Thickness of table top material min 50 mm, gable end, material MDF and veneer with PU finish having scratch resistance of 2H. The thickness of the gable end 19 mm. Modesty panel material particle board with veneer face coated with clear lacquer The thickness of the modesty panel material min 18 mm. ERU size 1200 X 440 X 750 mm. ERU top material Particle board of thickness 22 mm with veneer face coated with clear lacquer. ERU with 4 drawers and 3 storage unit. ERU side panels with 18mm thick all sides laminated particle board. Pedestal Unit of size 600 X 500 X 550 mm made of min 15 mm all sides prelaminated particle board. 3 drawers made of prelaminated particle board of 13 mm thickness. All drawer handles and hinges should be made of Stainless Steel. All boards should be three layers of Prelaminated particle board (Wood Product) of grade II type II of IS 12823/Latest, all complete as per direction of Engineer-in-Charge. Make Godrej/Featherlite/Boalt/Ergo/KF or eqvt.

Supply of Modular Office Work Station Single Seater Rectangular of size 1200 x 600 x 750 mm frame Should have powder coated extruded aluminum sections, The Height of partition is 1200mm and 45mm thick with 8 mm thick tile (pinup board and Writing Board) as per required, Depth of table top 525 mm, Height of table top 750 mm, Thickness of table top is 25 mm thick, Having 3 drawer pedestal unit of size 450 x 400 x 725 mm, made out of 18mm thick commercial ply with 1mm thick laminate as approved and back covered with 8 mm thick ply with laminate. all drawer ride on telescopic sliding channel with all necessary hardware and fittings with Key board and CPU Trolly, all complete as per direction of Engineer-in-Charge. Make Godrej/Featherlite/Boalt/Ergo/KF or eqvt.

Supply of Computer table of size 1200 x 500 x 750 mm made out of 19 mm thick commercial board with 1 mm thick laminate on sides & front. Top to have 18mm thick post formed board, having drawer, key board and provision of CPU trolley all drawer ride on telescopic sliding channel and back covered with 6 mm thick commercial ply all exposed edges covered with teak wood lipping or PVC lipping ( as required) and finish with melamine polish etc., all complete as per direction of Engineer-in-Charge. Make Godrej/Featherlite/Boalt/Ergo/KF or eqvt.

Supply of Library Reading Table size (2100x1050x750) mm. made out of 90 x 90mm thick tapered and side rail of size 90 x 22 mm teak wood finish, having with chequered frame design of 2 number support in center of size 22 x18 mm and 1 number both side support of size 22 x18mm, top to have 30mm (19 + 12 +1) thick made out of 19 mm thick commercial ply with 1mm thick laminate with 4 mm thick teak wood beading all exposed edges and teak wood frame and finish with melamine polish etc., all complete as per direction of Engineer-in-Charge. Make Godrej/Featherlite/Boalt/Ergo/KF or eqvt.

Supply of Stage Dias Table of size 2100 x 525 x 750mm made out of 18mm thick commercial ply wood for frame work, shelf, front facia, front, top, and side end surfaces to have 3.5 mm thick approved veener in approved design with vertical / Horizontal grains and 4mm thick grooves, all exposed edges to have teak wood moulded beadings, top to have Melamine finish and all remaining exposed, veneered surfaces finished with melamine polish and all other exposed surfaces with 0.8mm thick white shade laminate of approved brand etc., all complete as per direction of Engineer-in-Charge. Make Godrej/ Featherlite / Boalt/ Ergo/ KF or eqvt.

Supply of Officer Chair (High Back) revolving chair with multi position locking , seat depth adjustment, designed with 360 degree revolving mechanism, Armrest type Moulded armrest continuously fitted with seat bottom to backrest, Armrest front side Curved, Seat type Moulded, Section Size (Diameter/Sides) of frame 30 mm, Armrest material thickness 12 mm, Seat material thickness 12 mm, Backrest Material thickness 1.6 mm, Seat Depth 480 mm Seat Width 520 mm Seat height from floor surface 525 mm Backrest width 510 mm Backrest height from seat 480 mm Arm Length 240 mm Arm Width 35 mm and polyester fabric upholstery., all complete as per direction of Engineer-in-Charge. Make Godrej/Featherlite/Boalt/Ergo/KF or eqvt.

Supply of Staff Chair (Medium Back) 480 X 480 X 750 mm revolving chair with seat depth adjustment, designed with 360 degree revolving mechanism, arm rest, glass filled nylon pedestal base with MS plate joining the back rest with seat of the chair. Hot pressed plywood seat base, moulded PU seat 50mm thick, width 490mm and polyester mesh fabric upholstery. Flexible back rest with adjustable lumber support of size 550 x 450 mm without head rest, covered with mesh fabric. Adjustable armrest with top material made of PU. Frame material Aluminium pipe (hollow section) conforming to Designation HV20 WP of IS 1285/latest amendments. Backrest material single peice of Cold reduced Carbon steel Sheet conforming to grade CRO of IS 513 part1/ latest., all complete as per direction of Engineer-in-Charge. Make Godrej/Featherlite/Boalt/Ergo/KF or eqvt.

Supply of Reading Chair Non revolving Chair non tilting chair with armrest and cantilever under structure made of powder coated ERW tube of section 25 mm complete. Overall height -815mm, Seat height (Min) 450mm, Seat Depth and Width -450 and 500mm respectively, Backrest height and Width 490 and 500mm respectively, Type of Seat and backrest - Padded with Polyurethane foam, material of fabric of seat and back cover is vaccum formed from ABS sheet and upholstered voila fabric made from 100% polyster. Density of Polyurethane foam used in seat and backrest 45+2kg/Cum and color -Hot pressed plywood seat base, moulded 41 mm thick PU seat , width 470mm and polyester mesh fabric upholstery. Fixed back rest without head rest, of size 605 X 465 mm without head rest, covered with mesh fabric. Frame material Aluminium pipe (hollow section) conforming to Designation HV20 WP of IS 1285/latest amendments. Backrest material single piece of Cold reduced Carbon steel Sheet conforming to grade CRO of IS 513 part1/ latest. Overhanging fixed armrest covered with PU etc., all complete as per direction of Engineer-in-Charge. Make Godrej/Featherlite/Boalt/Ergo/KF or eqvt.

Supply of Visitor Chair Non revolving Chair non tilting chair with armrest and cantiliver under structure made of powder coated ERW tube of section 25 mm complete. Overall height -815mm, Seat height (Min) 450mm, Seat Depth and Width 450 and 500mm respectively, Backrest height and Width 490 and 500mm respectively, Type of Seat and backrest - Padded with Polyurethane foam, material of fabric of seat and back cover is vaccum formed from ABS sheet and upholstered voila fabric made from 100% polyster. Density of Polyurethane foam used in seat and backrest 45+2kg/Cum and colour -Hot pressed plywood seat base, moulded 41 mm thick PU seat , width 470mm and polyester mesh fabric upholstery. Fixed back rest without head rest, of size 605 X 465 mm without head rest, covered with mesh fabric. Frame material Aluminium pipe (hollow section) conforming to Designation HV20 WP of IS 1285/latest amendments. Backrest material single piece of Cold reduced Carbon steel Sheet conforming to grade CRO of IS 513 part1/ latest. Overhanging fixed armrest covered with PU etc., all complete as per direction of Engineer-in-Charge.Make Godrej/ Featherlite/ Boalt/ Ergo / KF or eqvt.

Providing and laying of Laboratory working bench as per actual site requirement of the lab with height 800 mm made out of acid resistant 18mm thick Jet Black colored granite top and placed on 4 mm thick neoprene rubber stop back (placed in between top and the frame) with provision of electrical point/ raceway cabinet design. Type of Frame C type-One piece Deep Drawn moulded in EDD CRCA frame work with 50 mm width x 50 mm height and epoxy powder coated material frame Galvanized (Zinc Coated) GI steel sheets Ground clearance Thickness of Frame 1.2 mm Side cover panels material 1.1 mm. Facilitating future equipment retrofits and full reconfiguration without requiring any major modification to the structure modular type of furniture and allied accessories with load carrying capacity of 600 kg. , all complete as per direction of Engineer-in-Charge. (Measurement will be done as per actual site execution).