Cashew Farm Kottarakkaa - PolyHouse Repair

Amount

polyhouse

2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

15.19 : Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

50.6.1.7 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

15.8.3 : Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m ( stacks of cleaned bricks shall be measured )From brick work in cement mortar

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

od904/2020_2021 : od1005/2016_2017 :Supplying and laying 250 micron UV stabilized, 5 layer , 90% light transmission polyfilms on theGI truss work with aluminium channels of approximate weight -140 gm/mtrs, double spring locking 0.8mm thick,smooth edges, flat bottom and PVC coated zig zag springs of 2.2 mm dia and excellent elasticity without damagingthe poly film. The channels fixed on the trusses using self drill screws galvanized with hex washer including all cost ofall material and labour charge including the aluminum locking profile and Zig Zag Spring etc complete.

od905/2020_2021 : Supplying and laying green shade net 60 % shade good quality for shade house.

od908/2020_2021 : od1005/2016_2017 :Supplying and laying anti insect net 60% air transmission nylon material on the<br>GI work with aluminium channels of approximate weight -140 gm/mtrs, double spring locking 0.8mm thick,<br>smooth edges, flat bottom and PVC coated zig zag springs of 2.2 mm dia and excellent elasticity without damaging<br>the poly film. The channels fixed on the trusses using self drill screws galvanized with hex washer including all cost of<br>all material and labour charge including the aluminum locking profile and Zig Zag Spring etc complete.

13.37.1 : White washing with lime to give an even shade:New work (three or more coats)

13.50.3 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

16.91.1 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design& pattern.

JR ENTERPRISES

WAYMARK BUILDERS

PUNNALA POTHUMARAMATHU LABOUR CONTRACT CO OPERATIVE SOCIETY

National Biotech

Bidder Name

MATHEW JOHN

National Biotech

JR ENTERPRISES

WAYMARK BUILDERS

PUNNALA POTHUMARAMATHU LABOUR CONTRACT CO OPERATIVE SOCIETY