ADDN/ALTN/IMPROVEMENT TO SNCOS LIVING -IN ACCN (BLDG NO. PM-14) AT AFS BIDAR

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., laid bedded and pointed in any mortar complete all as specified and as directed .

Granite (of any type) 18-20 mm thick, work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like including in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platforms and other similar locations complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding, removing rubbish off the premisses complete all as specified and as directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Glazed coloured ceramic coloured tiles in vertical surfaces 300 X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Composite Steel windows box type section with side hung double sided shutters (Glazed and Gauzed) including projecting type hinges with steel handle and steel peg stay complete suitable for Glazed and Gauzed shutters , dovetailed or welded with 'Z' section complete all as specified and as directed. Note :- (i) The unit rate quoted is deemed to be included for both glazed and gauzed shutters (ii) Glass , Wire cloth and painting shall be measured and paid separately under respective items of BOQ.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Factory made Second class hardwood glazed and skelton door shutters 35mm thick, open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, clause 8.24 (a) and fitted to chowkats, complete all as specified and as directed.

Factory made Second class hardwood rail and style plain framed panelled shutter (two panel) 35mm thick with lock rail and panel of 9mm B.W.P. commercial ply or 12mm venerered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet, supplied and fixing in opening as per specification and drawing shown in SSR complete all as specified and as directed.

Factory made solid Panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for styles and Plain colour sheet PVC for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail supplied and fixed as per SSR instructions complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tack or galvanised wire stapples complete all as specified and as directed.

Glazing with sheet glass 3mm thick ordinary quality fixed with oil putty in square n.exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Sheet glass 3mm thick pin headed/ figured , ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and as directed.

Aluminum anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed.

Aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

Aluminum aodised sliding door bolts of 300mm long with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Butt Hinges medium weight cold rolled mild steel 100 mm long complete all as specified and as directed.

S&F 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate, bearing ISI mark including necessary welding work complete all as specified and as directed.

S&F aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as specified and as directed.

S&F 150 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and as directed.

S & F in repair MS Powder coated curtain rods 25mm dia with suitable size of bracket complete all as specified and as directed.

S&F Rotational moulded polyethene water storage tanks 500 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball (Minimum weight 210 gms), 20mm tank nipple including dismantling of existing water tank complete all as specified and as directed.

Taking up or down steel tubing 15mm dia with fittings complete and all as specified and as directed

Taking up or down steel tubing 20mm dia with fittings complete and all as specified and as directed

GI tubing 15mm dia medium grade with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Refixing 15mm dia medium grade with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Cutting chases, pinning in brick / PCC block masonry / concrete surfaces walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges for concealed water tubing or concealed wiring etc, and making good, cutting not exc 10 cm girth complete all as specified and as directed.

GI tubing 20mm dia medium grade with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Refixing 20mm dia medium grade with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or liad on floors complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or liad on floors complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or liad on floors including necessary MS clamps complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or liad on floors including necessary MS clamps complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 75mm dia any radius complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110mm dia with access door any radius complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, (Single 'Y') 110mm dia equal or unequal with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) junction single, (Single 'T') 110mm dia equal or unequal with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap 75mm dia plain with stainless steel grating including jointing with solvent cement etc complete all as specified and as directed.

S&F PVC (SWR) gully trap 125mm including setting and jointing with solvent cement etc complete all as specified and directed.

S&F in repairs 15mm dia Bib tap (2 in 1 type) of brass, glossy finish complete all as specified and as directed.

S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy fancy type with capstan heads, chromium plated screw down high pressure, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15mm bore angle stop cock of chromium plated / brass, glossy finish complete all as specified and as directed

S & F in repairs, stop valves, 15 mm dia, cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle with long shank and cup [concealed type] for iron pipe etc complete all as specified and as directed.

S& F PVC connection of 15mm bore and 600mm long with PTMT nuts complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position complete all as specified and as directed.

S&F in repairs vitreous hina wash hand basins, size 550 X 400 mm (Flat back or angle back type) including 32mm bore PTMT waste coupling and a pair of angle iron brackets duly painted/ erecting stand including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3, complete all as specified and as directed

S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed.

S&F in repairs Health Faucet with 1.5 m tube & hook of brass, glossy finish complete all as specified and as directed.

S&F Soap dish, brass chromium plated of suitable size, first quality, and fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F liquid soap container of PTMT fixed with CP brass screws and wooden/ plastic cleats ( Min weight -300 gms) complete all as specified and as directed.

S&F Glass shelf assembly consisting of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long and over all size of shelf not less than 600X1200mm complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cms long between flanges complete all as specified.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe complete all as specified and as directed.

S&F in repair vitreous china squatting Pan 'orrisa' pattern size 580 x 440 mm white with integral foot rest , P or S Trap, and lime concrete bedding including making good disturbed surfaces complete all as specified and as directed.

S&F in repairs vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings and union for discharge pipe, CP screws etc complete all as specified and as directed.

S&F in repairs PVC waste pipe 32 mm bore including reducer socket etc complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Reinforced cement concrete 1:2:4 type B1 by using 20mm graded stone aggregate as in Slabs supported on walls complete all as specified and as directed.

Mild steel TMT bars 10mm dia, and over cut to length, bent to required shape including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips completed all as specified and as directed.

Mild steel TMT bars 6 to 8mm dia, cut to length, bent to required shape including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips completed all as specified and as directed.

Mild steel TMT bars 5mm dia and over up to and including 10mm dia in stirrups,spacers,binders etc.,, cut to length, bent to required shape including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips completed all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, and similar work; not exceeding 200m thick (Horizontal or sloping) for fair finished surface complete all as specified and as directed.

Formwork to sides and soffits of floor/ roof beam, lintel,cantilevers, shelves,chajja etc., complete all as specified and as directed.

Taking down cement plaster on brick or concrete or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15 mm thick on brick or concrete surfaces in CM 1:4 mixed with water proofing compound complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Rendering 5mm thick in cement mortar 1:3 on ceiling concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of newly plastered wall surfaces and applying 2mm thick wall care putty and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed .

Complete removal of existing treatment of wall surfaces and applying 2mm thick wall care putty and applying two coats of oil bound distemper over one coat of primer including and preparation of surfaces complete all as specified and as directed .

Preparation of old decorated surfaces of walls by washing, rubbing down stopping and applying one coat of oil bound distemper complete all as specified and as directed.

Preparation of Newly plastered wall , chajja , roof projection and roof fascia surfaces and applying two or more coat of Acrylic smooth exterior paint of approved shade @ 1.67 ltr / 10 sqm by mechanical sprayer over and including two or more coat priming coat of exterior primer 2.2 kg / 10 sqm complete all as specified and as directed .

Complete removal of existing treatment on wall , chajja , roof projection and roof fascia surfaces and applying two or more coat of Acrylic smooth exterior paint of approved shade @ 1.67 ltr / 10 sqm by mechanical sprayer over and including two or more coat priming coat of exterior primer 2.2 kg / 10 sqm complete all as specified and as directed .

Preparation of newly plastered surfaces ceilings including cornices pillars etc and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed .

Complete removal of existing treatment of ceilings including cornices pillars etc and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed .

Preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of red oxide primer complete all as specified and as directed.

Preparation of old painted surfaces of wood and wood based materials of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint ( first quality) complete all as specified and as directed.

Demolition of cement concrete (un reinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection including necessary form work complete all as specified and directed.

PCC 100mm thick 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

Machine pressed pre cast concrete interlocking designer paver blocks in any and shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade in path, hardstanding, etc laid over complete all as specified and as directed. Note :- Sand cushioning shall be measured and paid separately.

Sand for cushioning as under floors of paver blocks , compacted by using plate compactor or other suitable mechanical method etc., complete all as specified and as directed.

PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in kerbs / benching, coping including necessary form work complete all as specified and as directed.

Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 with water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement including application of 50 micron polythene film and applying 02 coats of bitumen each coat @ 1.50 Kg/Sqm complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

Plain cement concrete 1:5:10 type E2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Supply only liquid water water proofing compound

Demolition of brick work, stone / boulder masonry, precast concrete block masonry etc., built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Precast Cement concrete block masonry with solid blocks, type C1, 1:3:6 using 20 mm graded stone aggregate, exc 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

Cutting holes into or through concrete/stone masonry/PCC block walling built in cement mortar exceeding half brick and not exceeding one brick and making good in Cement Mortar 1:3 or Cement Concrete 1:2:4, Type B-1 as required for inserting brackets, hold fasts etc and depth of embedded portion of hold fasts or lugs measured from the face of the jamb into the wall complete all as specified and as directed.

Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M&L for 18/19 mm thick Prelaminated particle board interior grade, both sides prelaminated with decorative choice lamination , fixed with screws to timber frame work for shutters of ward robes, cabinets etc., complete all as specified and as directed.

Teak wood lipping 6mm thick fixed with nails to 18/19mm thick board complete all as specified and as directed.

Hasp and staple 100mm long, aluminium anodized including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Taking down/removing of existing water proofing felt on roof surfaces and wall surfaces complete all as specified and as directed.

Plain cement concrete 1:2:4 type B0 by using 12.5 mm graded stone aggregate including necessary form work for as in padding concrete on roof / chajja complete all as specified and as directed.

Rendering 15 mm thick on brick or concrete surfaces in CM 1:3 mixed with water proofing compound complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Spreading / brushing neat cement slurry with 3.00 kg per sqm on concrete surfaces complete all as specified and as directed.

Water proofing treatment on horizontal or vertical surfaces with provision of oil bound bitumen primer @ 0.20 Kg / Sqm and providing 4 mm thick, APP modified water proofing membrane weighing not less than 4.0 Kg/Sqm reinforced with non-oven polyster matt weighing not less than 160 gm /Sqm, applying a coat of blown grade hot bitumen 85/25 or 90/15 @ 1.20 Kg / Sqm and finished with solar reflective bituminous aluminium paint @ 100 gm /Sqm complete all as specified and as directed.

Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC) 150 mm internal dia including concrete bed and haunching against the sides of pipes complete all as specified and as directed

Salt glazed stone ware pipe Grade 'A' laid in trenches and jointed with cement nominal dia of pipe 150 mm complete all as specified and directed.

Precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate, as in cover slab set and jointed in CM 1:4 including necessary form work complete all as specified and directed. Note: Reinforcrment steel will be measured and paid seperately.

Plain cement concrete 1:3:6, type C-2 using 40mm graded crushed stone aggregate as in bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

Cutting into existing manholes for connection new drains including making good to pipe, and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as reqd for 150mm dia size complete all as specified and as directed.

Extra for forming fair finished channel or drain 30cm inner girth in cement concrete using extra cement including mitred/ stopped ends, forms mould etc, complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for manholes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / disintegrated rock complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and exc 1.5 m but n. exc 3.0 m in depth; for foundation, etc. or for manholes, etc. n exc 10 sq m on plan and getting out in soft / disintegrated rock complete all as specified and directed.

Returning filling in including spreading leveling and well ramming in layers n.exc 25 cm thick as in soft / disintegrated rock complete all as specified and as directed. .

Removing excavated soft / disintegrated rock to a distance n.exc 50 m and depositing where directed at a level n.exc 1.50m from starting point complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (Light, fan, socket or power) complete all as specified and as directed.

Point wiring with 1100 V grade 1.5 Sqmm single core FRLS PVC insulated unsheathed cable, copper conductor multistranded passing through and including heavy duty PVC conduit with all accessories, concealed in wall with concealed pressed steel terminal boxes made out of 1.6mm thick MS sheet with 3mm thick laminated top cover duly earthed with 1.5 sqmm multistranded FRLS PVC insulated copper conductor cable for one light point / fan point controlled by one switch complete all as specified and as directed. Note :- Cutting chases for concealed wiring will be measured and paid separately

All as per item No. 121.00 here-in-before but in same board with other switches for 5 Amp switch socket with earth wire 1.5 sq mm FRLS PVC insulated multistranded copper conductor FRLSH cable complete all as specified and as directed.

All as per item No. 121.00 here-in-before but for 5 Amp switch socket on independent board complete all as specified and as directed.

All as per item No 121.00 here-in-before but size of FRLS cable 2.5 sqmm for 15 Amp switch socket with earth wire 2.5 sqmm FRLS PVC insulated multistranded copper conductor cable complete all as specified and as directed.

All as per item No. 121.00 here-in-before but for one light point controlled by two way switch of 5 Amp complete all as specified and as directed.

All as per item No 121.00 here-in-before but size of FRLS cable 4.0 sqmm for 15 Amp switch socket with earth wire 4.0 sqmm FRLS PVC insulated multistranded copper conductor cable complete all as specified and as directed.

Point wiring with 1100 V grade 1.5 Sqmm single core FRLS PVC insulated unsheathed cable, copper conductor multistranded passing through existing concealed conduit with concealed pressed steel terminal boxes made out of 1.6mm thick MS sheet with 3mm thick laminated top cover duly earthed with 1.5 sqmm multistranded FRLS PVC insulated copper conductor cable for one light point / fan point controlled by one switch complete all as specified and as directed.

All as per item No. 127.00 here-in-before but for 5 Amp switch socket on independent board complete all as specified and as directed.

All as per item No. 127.00 here-in-before but in same board with other switches for 5 Amp switch socket with earth wire 1.5 sq mm FRLS PVC insulated multistranded copper conductor FRLSH cable complete all as specified and as directed.

All as per item No 127.00 here-in-before but size of FRLS cable 2.5 sqmm for 15 Amp switch socket with earth wire 2.5 sqmm FRLS PVC insulated multistranded copper conductor cable complete all as specified and as directed.

Switch piano flush, single pole, one way, 5/6 Amp, complete all as specified and as directed.

Switch piano flush, single pole, one way, 15/16 Amp, complete all as specified and as directed.

Switch piano flush, single pole, two way, 5/6 Amp, complete all as specified and as directed.

Switch socket outlet 3/5 Pin 5/6 Amp, flush type, complete all as specified and as directed.

Switch socket outlet 5/6 Pin 15/16 Amp, flush type, complete all as specified and as directed.

Ceiling rose three terminals 5 amps PVC / Polycarbonate, insulated body complete all as specified and as directed.

Lamp holder, angular type, PVC / Polycarbonate with back plate suitable for surface/ wall mounted batten fittings with and including 12W LED lamp complete all as specified and as directed.

Fan regulator, AC, 230V, single pole electronic, step type, complete all as specified and as directed.

S & F LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old fitting complete all as specified and directed.

S & F of LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including taking down old fitting complete all as specified and directed.

S & F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size including taking down old fitting complete all as specified and directed.

S & F LED INTEGRATED BATTEN T5 tube light fitting type 1x 9/10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old fitting complete all as specified and directed.

S & F energy saving surface mounted, decorative oval bulk head edge- lit LED luminaire 10W, comprising of high brightness LEDs complete with all accessories internally pre wired including provision of 10 watts high brightness LEDs 6000K and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to light fitting including taking down old fitting complete all as specified and directed.

S & F LED bedside light fitting of decorative type 5 watt spot pattern aluminium body warm white adjustable arm shade material metal of push button corded electric including taking down old fitting complete all as specified and directed

Earthing with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground vertically to depth of not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to GI earth wire 4mm by means of bolts, nuts, washers of GI and provision of earth lead, GI protection pipe with 15mm light grade galvanized including necessary earth work in any type of soil, PCC 1:3:6 type CI (using 20mm graded stone aggregate) earth chamber and 1:2:4 type B1 RCC cover fitted with 50mm thick with 6mm dia MS bars as shown in SSR Pt - 1 electrical plate No 3 complete all as specified and as directed. Note: Quoted rate deemed to include the cost or excavation and earth work PCC chamber, funnel cover etc

S & F MCB DB, TPN 4 way having facility to fix MCCB incomer up to 125Amps and MCb's in out going with 200 Amps rated copper bus bar with mild steel sheet enclosure, double door suitable for fixing MCBs and connecting etc., including taking down existing complete all as specified and as directed.

S & F MCB DB, SPN 8 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, double door suitable for fixing MCBs and connecting etc., including taking down existing complete all as specified and as directed.

S & F MCB SPN 63 Amp complete all as specified and as directed.

S & F MCB SPN 6 to 40 Amp complete all as specified and as directed.

Sub main wiring with 4 runs of 6 sqmm, single core, FRLS PVC insulated, unsheathed, 1100 volts grade, multi stranded with copper conductor, drawn through and including suitable size of rigid non metallic concealed PVC conduit pipe and accessories with 2 runs of 6 sqmm of FRLS PVC insulated copper conductor for earth continuity including taking down existing submain wiring complete all as specified and as directed.

Sub main wiring with 2 runs of 6 sqmm, single core, FRLS PVC insulated, unsheathed, 1100 volts grade, multi stranded with copper conductor, drawn through and including suitable size of rigid non metallic concealed PVC conduit pipe and accessories with 1 run of 6 sqmm of FRLS PVC insulated copper conductor for earth continuity including taking down existing submain wiring complete all as specified and as directed.

Sub main wiring with 2 runs of 4 sqmm, single core, FRLS PVC insulated, unsheathed, 1100 volts grade, multi stranded with copper conductor, drawn through and including suitable size of rigid non metallic concealed PVC conduit pipe and accessories with 1 run of 4 sqmm of FRLS PVC insulated copper conductor for earth continuity including taking down existing submain wiring complete all as specified and as directed.

S & F in replacement of MCCB 63 Amp 4 pole 36 KA (Adjustable thermal and Adjustable magnetic release setting) in existing panel board connecting with proper size link set, incoming, out going cable electrically connected and making necessary modification in existing panel as required at site complete all as specified and as directed.

GI tubing light grade 50mm bore with all fittings fixed to wall or laid on floors for cable protection complete all as specified and as directed.

Taking down existing ceiling fan / exhaust fan of any sweep of any make from any height of the building for repair the same by replacing minor spares like capacitor, bearing,bushes,down rod and spray painting with one coat of synthetic enamel paint of existing colour and marking the MES number and reconnecting the cables and fixing back the same in its original position complete all as specified and as directed.

Cutting the existing road / hard standing up to a width of 45cm and depth for laying of pipe / laying of cables and making good with PCC 1:3:6 type C1 complete all as specified and directed.

Boring / drilling by mechanically under the road in any type of soil, pavement, hard standing by trenchless technology using ultra sonic technique with out cutting / disturbing the existing road for inserting HDPE / GI pipe of up to 100mm dia suitable for 0.4mpa working pressure for drawing the cable complete all as specified and as directed.

S&F industrial type metal clad plug top & socket single pole and a natural link earth enclosure with MCB SP 20 Amp complete all as specified and as directed.

S&F PVC connecton 45 cm long both end brass nut suitable for hot / cold water supply and screw down 15mm GI pipe complete all as specified and as directed.

S&F ceiling fan BLDC (brushless direct current) Motor ceiling fan 1200 mm sweep 5 star rating with blades, downn rods and electronic regulator with all accessories of single phase 240 Volts, 210 CFM with service value 6.00 BEE single phase, 50 Hz. 230 volts, white color and taking down duly old unserviceable BER fan and deposited to the MES yard complete all as specified and directed . Note : -1. Provide 2 years warranty on motor and 3 year on PCB duly obtain from OEM.

Exhaust fans (Heavy duty) 300 mm sweep 230/240 volts single phase with self closing louvers GI off mode protection against birds etc including provision of cutting of walls suitabully for fixing exhaust fan and necessary plastering and making good the disturbed surface to match with existing complete all as specified and as directed.

Taking down / dismantling of defective/ rusted storage type hot water Geyser 50 /35 /25 Ltr capacity by disconnecting inlet/ outlet connection including de-scaling/ cleaning inner shell, servecing by Checking defects including replacement of minor spare parts such as thermostat, heating element etc. make it serviceable and re-assembling & re-fixing the Geyser in position and connection & testing complete all as specified and as directed.

S&F LED post top lantern 45 W with die cast aluminium spigot, spun aluminium powder coated top cover, aluminium PDC heat sink, opal PC diffuser and clear acrlic, IP 65 protection including taking down U/S light fittings complete all as specified and as directed.

S&F LED Bollard 8 watt decorative Luminaire including taking down U/S light fittings complete all as specified and as directed

Supply, lay, connect, test and commisioning of LT XLPE insulated, screen, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor multistranded 10 Sqmm 2 Core, 1100 volts grade including connecting the cable ends to the LT Panel/ Transformer /LT OH lines and distribution board including taking down U/S cable complete all as specified and as directed.

Supply, lay, connect, test and commisioning of LT XLPE insulated, screen, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor multistranded 50 Sqmm 3.5 Core, 1100 volts grade including connecting the cable ends to the LT Panel/ Transformer /LT OH lines and distribution board including taking down U/S cable complete complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for taking out / for laying under ground cables / pipes etc and getting out in soft/loose soil complete all as specified and as directed.

Supply and spreading natural river sand in trenches for cushioning of under ground cable complete all as specified and as directed. Note: Punned thickness will be measured and paid for purpose of the payment.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed .

Removal of surplus excavated material ( soils) to a distance not exc., 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed.

Supply and laying unreinforced pre cast concrete cable cover class LV, Type I, flat, size 250mm x 150mm x 40mm for cable protection complete all as specified and as directed.

famous construction (BID ID -3061429)