PROVN OF SINGLE LIVING OFFICER ACCN AT AIZWAL MILITARY STATION UNDER GE SILCHAR

Amount

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and as directed.

Removal of excavated material [Soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and depth not exceeding 1.5m and getting out in hard / dense soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and depth exceeding 1.5m but not exceeding 3m and getting out in hard / dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Material and labour treating the backfill in contact with foundation at the rate of 7.5 litres of ATT chemical emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

Material and labour treating the top surface of filled earth at the rate of 5 litres of ATT chemical emulsion per square metre of surface complete all as specified and directed.

Material and labour treating the soil under plinth protection at the rate of 5 litres of ATT chemical emulsion per square metre of surface area complete all as specified and directed.

Material and labour treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

Material and labour broken stone or boulders hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

Material and labour Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in foundations filling and mass concrete complete all as specified and directed.

Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in foundations filling and mass concrete complete all as specified and directed.

Material and labour for reinforced cement concrete (design mix) in M-25 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. Note :- (i) Reinforcement and form work required shall be measured and paid seperately (ii) Design mix will be approved by the GE.

Material and labour for Reinforced cement concrete (design mix) in M-25, (20 mm graded aggregate) in columns/pillars complete all as specified and as directed. Note :- (i) Reinforcement and form work required shall be measured and paid seperately (ii) Design mix will be approved by the GE.

Material and labour for reinforced cement concrete (design mix) in M-25 (20mm graded aggregates) for beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note :- (i) Reinforcement and form work required shall be measured and paid seperately (ii) Design mix will be approved by the GE.

M & L for RCC M-25 Design Mix, using 20mm graded stone aggregate as in Chajjas and the like complete all as specified and as directed. Note :- (i) Reinforcement and form work required shall be measured and paid seperately (ii) Design mix will be approved by the GE.

Material and labour for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete, flat complete all as specified and as directed.

Material and labour for use and waste of form work to sides of pillars, posts, struts, piers, piers, columns and stanchions of square, rectangular or polygonal shape with rough finished surfaces of concrete complete all as specified and as directed.

Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc with rough finished surfaces of concrete flat complete all as specified and as directed.

Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed.

Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work in half brick thick walls using Fly Ash bricks straight or curved on plan to any radius built in Cement Mortar 1:4 including 2 Nos of 8mm dia bars at every fourth course of brick work complete all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour for rendering 15mm thick in cement mortar 1:4 including mixing with water proofing compound @ 2% weight of cement on brick masonry surface finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Material & Labour for rendering 15mm thick in cement mortar 1:4 on brick masonry surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 5 mm thick rendering in cement mortar (1:3) of ceiling/chajja surfaces finished even and smooth complete all as specified and as directed.

Material & Labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

Material & Labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, as on skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding .11 sqm but not exc 0.18sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

Material & Labour for joint free glazed ceramic coloured tiles 450 x 300 x 7 mm thick of premium quality on skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated trapezoidal profie sheet steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.

Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.

Supply & Fixing Reinforcement using TMT steel bars,Fe500, 10mm dia and over, cut to length,bent to shape required,including cranking bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips qualsecuring with clips all as specified and directed.

Supply & Fixing Reinforcement using TMT steel bars, Fe500, 6 to 8mm dia, in stirrups spacers and binders cut to length,bent to shape required,including cranking bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips qualsecuring with clips all as specified and directed.

Material and labour for mild steel round bars 10mm dia cut to length, bent to shape required including cranking bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips qualsecuring with clips all as specified and directed

Supply and fixing structural steel work in tubular trusses , Purlin , posts, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as as specified and as directed.

Supply and fixing plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W (Gde-E -250) Quality 'B' complete all as specified and as directed.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc.10cm long but n.exc.15cm long, diameter of neck 11 to 15 mm complete all as specified and as directed.

Supply and fixing of Framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe 290 Gde-E-165 complete all as specified and as directed.

Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, complete including one coat of shop primer complete all as specified and as directed.

Supply and fix 165x60mm size pressed steel, frames made of 1.25mm thick MS sheet for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate including one coat of shop primer complete all as specified and as directed.

S & F Factory made, 30mm thick, Second Class Hard Wood, Plain framed, Panelled Shutter [Two Panel] with Lock Rail and Panel of 9 mm BWP Commercial Ply or 12 mm Veneered Particle Board with Commercial Veneering on both faces, the size of Rail and Stile as per IS – 1003 [Part – I], Kiln Seasoned and Chemically Pressure treated and fitted to Chowkats complete all as specified and as directed.

Supply & Fixing 35mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [b] and fitted to Chowkats complete all as specified and as directed.

Supply & Fixing 30mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [b] and fitted to Chowkats complete all as specified and as directed.

Supply & Fixing Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and as directed.

Supply & Fixing Factory Made Solid PVC Moulded core Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed.

Material and labour for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply only integral water proofing compound (WPC) of best quality (ISI marked on packet) complete all as specified and as directed.

Material and labour for preparation of new surface and applying two coats of Acrylic Smooth exterior paint of required shade on New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including provision of necessary scaffolding complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer over a coat of 1mm thick wall care putty complete all as specified and as directed.

Material and labour for preparation of new steel surface over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth with out using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed.

Supply & fixing PVC (SWR) valley gutter, in any length with rubber ring loints, fixed to walls of 150mm bore complete all as specified and directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Supply and fixing 3mm thick sheet Glass ordinary quality in squares not exceeding 0.5 Sq.m and glazing with oil putty in each pane complete all as specified and as directed.

Supply and fixing Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long complete all as specified and as directed.

Supply and fixing Aluminium anodised barrel tower bolt of extruded section and fixed 150 mm long complete all as specified and as directed.

Supply and fixing aluminium handles, fabricated type, anodised 150 mm long fixed with screws complete all as specified and as directed.

Supply and fixing 100 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed.

Supply and fixing 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed.

Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick high Pressure Non Asbestos Fiber Cement decorative Board (E-Board Classic) in a grid of GI systtem duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid complete all as specified and as directed.

Supplying and laying GI tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing complete all as specified and as directed.

Supplying and laying GI tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing complete all as specified and as directed.

Supplying and laying GI tubing of 25 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing complete all as specified and as directed.

Supply & Fixing Gun Metal Globe or Gate Valve of Class - I Pressure Tested of 1.5 Mpa, 20 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS-778, ISI Marked complete all as specified and as directed.

Supply & Fixing Gun Metal Globe or Gate Valve of Class - I Pressure Tested of 1.5 Mpa, 15 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS-778, ISI Marked complete all as specified and as directed.

Supply & Fixing Gun Metal Globe or Gate Valve of Class - I Pressure Tested of 1.5 Mpa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS-778, ISI Marked complete all as specified and as directed.

Supply and fix Ball Valves, 25 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe [Minimum Weight 25mm - 455 Grams] complete all as specified and directed .

Supply and fixing brass Door Spring 300 mm, Ordinary Rat Rail Rod Pattern springs including roller and roller plate complete all as specified and as directed.

Supply & Fixing Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws, wooden rawl plugs complete all as specified and as directed.

Supply and fixing Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as specified and as directed.

Supply and fixing 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Bib Tap, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type, screwed down for iron pipe and fixed etc complete all as specified and as directed.

Supply and fixing 15mm dia PVC connection pipe 600mm long with PTMT nuts complete all as specified and as directed.

Supply & fixing 110 mm bore PVC (SWR) reducers complete all as specified and directed.

S & F 75 mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

Supply & fixing 110 mm bore PVC (SWR) connector with lip ring for WC complete all as specified and directed.

Supply & fixing 110 mm bore PVC (SWR) S trap complete all as specified and directed.

Supply and fixing PVC [SWR] Floor Trap with grating including jointing with solvent cement, 75mm dia of outlet complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) bends including jointing with solvent cement complete all as specified and directed.

Supply and fix 150 mm bore PVC (SWR) bends including jointing with solvent cement complete all as specified and directed.

Supply and fixing Brass CP mixer for mixing hot & cold water screwed down for iron pipe with mixing valve including three joints to steel pipes or unions and plugging and screwing to walls all as specified and as directed.

Supply & Fixing CP shower rose of 125mm dia with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass complete all as specified and as directed.

Material & Labour for Granite Stone Slabs of 20 mm thick as in Steps, Jambs, Pillars, Window Cills, Cooking Platform etc. and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and jointed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of the Granite Slabs including screed bed of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed.

Supply and fixing Curtain Rods, Mild steel, Chromium plated, 20 mm dia alongwith 02 Nos. brackets, stops, rollers etc complete all as specified and as directed.

Supply and fixing Vitreous China Ware Wash Hand Basin, White, Flat Back of size 630 mm X 450 mm including Pillar Tap, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. complete all as specified and as directed.

Supply and fixing Brass Chromium Plated Toilet Paper Holder with flap including brass screws complete all as specified and as directed. Make: Jaquar model cat part No CAN-CHR-1153S or equivalent make as specified in Particular Specification.

Supply and fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long including fixing arrangement complete all as specified and as directed.

Supply and fixing 15mm dia Stainless Steel braided Flexible Hot & Cold Water connections of length 600mm complete all as specified and as directed.

S & F Health Faucet with 1.2 m long flexible tube, wall hook, non return valve complete all as specified and as directed.

Supply and fixing Vitreous China Wash Down Water Closet [Pedestal pattern], White including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap including making good the disturbed floor complete all as specified and as directed.

Material and labour for 75mm thick Plain Cement concrete type C-2, P.C.C 1:3:6 (40mm graded aggregate) as in subbase for flooring, finished the surface even and fair complete all as specified and directed.

Material and labour pre polished coloured glossy finished rubber moulded Chequered cement concrete tiles of size 300mmx300mm of 25mm thick as in floors set , jointed & pointed with neat cement slurry with white cement and pigment including 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and as directed.

Material and labour for 100 mm thick Plain Cement concrete type D2 1:4:8 (40mm graded crushed stone aggregates) as in subbase for flooring/hardstanding, finish the surface even and fair complete all as specified and as directed.

Material and labour for 100 mm thick Plain Cement concrete type B-1, P.C.C 1:2:4 (20mm graded aggregate) as in flooring/ hardstanding, surface finish even and smooth without using extra cement complete as specified.

Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layered hoisted and fixed in position complete and all as specified and as directed.

Material and labour for cement concrete bed (1:3:6) type C-2, using 40 mm graded to drain pipe including packing under and haunching against the side of pipe after they are laid and tested for bore of pipe 150 mm complete all as specified and as directed.

Material and labour for PCC (1:2:4) type C1 (using 20mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed.

Material and labour for providing Precast RCC 1:2:4, Type B-1, using 20mm graded stone aggregate as in Landings, Cover Slabs [for manholes etc], Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed.

Supply and fixing 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors /wall complete all as specified and as directed.

Supply and fixing Salt glazed stoneware drain pipes of 150mm internal dia, ISI marked, grade “A, laid in trenches amd jointed with CM 1:1 complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Material and labour for Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto -

Material and labour for concealed point wiring with FRLS stranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated cable 1100 volts grade drawn through PVC conduit including all accessories etc ISI marked in concealed with GI sunken boxes with earth dolly and cover plate with frame suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor connecting to common earth dolly for one light point/ fan point/ bell point complete all as specified and as directed.

All as per item No 106 above but for 3 pin 5 Amp socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per item No 106 above but for 3 pin 5 Amp socket outlet point controlled by one switch on independent board complete all as specified and as directed.

All as per item No 106 above but with FRLS stranded copper conductor 2.5 sqmm (nominal area), two single core, PVC insulated and unsheathed cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including FRLS PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

Supply & Fixing ceiling rose surface bakelite with three terminals complete all as specified and as directed

S & F Switch, Modular Type, One Module, Single Pole, 6 Amps, 230 Volts, one way complete all as specified and as directed.

S & F Switch, Modular Type, One Module, Single Pole, 16 Amps, 230 Volts, one way complete all as specified and as directed.

Supply & Fixing bell push modular type 6 Amps complete all as specified and directed.

S & F Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 120 W, AC, 230 Volts, Single Pole complete all as specified and as directed.

S & F Socket, Modular Type, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply & Fixing Switch socket Combination, Modular type 16A, 6 pin, 3 module complete all as specified and directed.

Supply & Fixing bell electric ding dong modular type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and fixing Surface & wall mounted Energy efficient LED Tube Light Fitting, of 20 W, 6500 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95

Supply and fixing Surface & wall mounted Energy efficient LED Tube Light Fitting, of 10 W, 6500 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95

Supply & Fixing Energy efficient & Long life Building Security Light Luminaire, of 25 watt, 5700 K with Pressure Die Cast Aluminium Housing, IP66 protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 32 mm bore GI Tube, Medium Grade of size not exceeding 1.50 m in length and bent to shape required and fixed with 2 Nos of Pole fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95

Supply and fixing of MCB DB TPN 4 ways, powder coated, double door, 230 Volts, including bus bar neutral link, earth bar and din rail, for fixing MCB of various rating complete all as specified and as directed.

Supply & Fixing of MCB SP of capacity 6-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed.

Supply & Fixing of MCB TPN of capacity 63 to 100 Amps, 240 V, 10 KA 'B' curve complete all as specified and as directed. Note for serial Item No. 121 to 123: MCB and MCB DB shall be of same make as approved by GE.

Supply & Fixing Energy efficient, Low Noise, Ceiling Fan, 1200mm Sweep of any colour as approved, 03 blades, BEE 5 Star Rated, with BLDC Motor, Copper Wound, 350 RPM, with Double Ball Bearing, Conforming to IS - 374, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50Hz, including Down Rod, Canopies, Shackles, Safety Rope, Hanging Clamps, Bushes, having P.F >0.95, Service Value >6.5, Air Delivery >215 CMM, Power Consumption less than 35 Watt, THD less than 5% including provision of Electronic speed control Regulator step type, including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Ceiling Fan shall be provided with 03 Years onsite replacement warranty. Rate quoted is deemed to be including the same and nothing shall be paid extra on this account.

Supply & Fixing plastic body exhaust fan 250mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with 3 core flexible copper cable including making holes on the wall and making good to the disturbed surfaces complete all as specified and as directed.

Supply & Fixing Energy efficient, BEE 5 Star rated Storage type Water Heater [Geyser] 25 Litres Capacity with 2000 Watt Capacity heating element Conforming to IS - 2082, Vertical Storage type with copper Inner Tank and steel body complete fixed to wall with suitable expansion fasteners including 02 Nos. of 450 mm long x 15mm dia Stainless Steel braided Flexible Hot & Cold Water connections and 15mm bore Non-Return Valve complete all as specified and as directed.

Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion complete all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.

Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 16 sqmm 4.0 core laid in trenches/fixed to wall/under road/pipe as per IS 7098 (Part I) etc including cable glands, aluminium lugs complete all as specified and as directed. Note:-Excavation and earth work will be measured and paid separately

Material and labour for well burnt subclass 'B' bricks laid flat width wise along the length of cable for cable protection complete all as specified and as directed.

Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to desired thickness complete all as specified and as directed. (Note: Punned thickness shall be measured for payment purpose)

Supply and laying 40 mm bore galvanised GI tubing, light grade with all fittings for passing of UG cables complete all as specified and as directed.

MS AFTAB LASKAR (BID ID -3422713)

M/S LUIT CONSTRUCTION (BID ID -3421952)

M/S SUBHAM ENTERPRISE (BID ID -3418609)

ABDUL AUDUD (BID ID -3422456)

M/S RAJU ENTERPRISES AND BROS (BID ID -3420808)