SPL REPAIR TO BLDGS AT TRANSIT CAMP AND INF BDE, PROVN OF HARDSTANDING GROUND AT FD WKSP, ROOF SHED AT SYS DET AND DRAINAGE SYSTEM AT LT REGT AT KARGIL UNDER GE KARGIL

Amount

Surface excavation not exceeding 30 cm deep and avrage 30CM getting out in hard/dense soil for roads to required slope gradient, camber etc complete all as directed.

M & L for Hardcore150mm thick of gauge exc63mm but n exc 100 mm Broken stone , deposited, spread and levelled in layers n exc15 cm thick, watered and rolled/rammed to a true surface.

M & L for Rolling and consolidation broken boulders or quarred stone not exc 15 cm thickness with power roller exc 5 tonne & n.exc 8 tonne all as specified and directed

M&L 150mm thick, cement concrete, type D-2, 1:4:8, (40mm graded aggregate) finished even and rough to receive floor topping.

M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide.

M&L for finishing surface of concrete roads,pavements, by brooming complete all as specified

M & L for Forming contraction joints 65mm deep x 10mm wide filled with seling compound with Grade 'A'.

Removing excavated material exc 250 m and n exc 500m depositing where directed at a level not exc 1.5 mtr above the starting point.

Forming embankments including raising earth, spreading in layers n exc 30 cm thick , watering, ramming / rolling and finishing to required size , shape etc n exc 1.5 m high from base.

M&L for forming 12mm thick expansion joints for 150 mm thick concrete slab and filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.

M & L for Rolling and consolidation of formation surfaces in cutting with power roller exc 5 tonne & n.exc 8 tonne including filling in soft spots, depression etc, which occour during rolling ( for portion coming in cutting/original groud only) to required camber and gradient etc including watering before or during rolling complete all as specified and directed

M & L for 200 mm thick cement concrete work in pavement / hard standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre for hard standing complete all as specified and directed

Excavating in hard/dense soil in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete

M & L 75mm th PCC 1:3:6 type C-2 as in sub base, Floors, Paving, plinth protection, finished even and fair complete all as specified.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick screed bedor bedding layer cement mortar in (1:6), complete all as specified and as directed by Engr-in-charge.

Removal of surplus soil to a distance exceeding 50 mtr and depositing where directed at a level not exceeding and depositing where directed at a level not exceeding 1.5m above the starting point

Cutting holes PCC block/stone walls built in CM or in cement mortar for inserting angle iron & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required

Prepation of new plastered or unplastered surfaces of walls and applying two coats of Cement base paint , complete all as specified and directed by Engr-in-Charge.

Prepation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of redoxide primer

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified

S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe410-0 or Fe 310-O

Form work to sides of conrete foundation footings bases of columns, raft and raft beams sides and soffits of foundation and plinth beams and similar work etc. complete all as specified and directed by Engr-in-Charge.

Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth for foundation, laying of pipes etc and not exceeding 10 sqm on plan for manholes etc and getting out in hard/ dense soil, complete all as specified. and directed by Engr-in-Charge

M&L for Precast cememt concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.

Rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 160mm bore pipe.

PVC (SWR) bends any radius of 160mm bore

Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25 Cm thick, , complete all as specified. and directed by Engr-in-Charge.

M & L for 100mm thick concrete bed to drain pipe in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipe after laid and tested for 150 mm bore, complete all as specified and directed by Engr-in-Charge.

Supply and fixing mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.

Precast reinforced cement concrete, type B-1,1:2:4 (using 20mm graded crushed stone aggreagate)as in manhole set in cement mortor 1:4 , complete all as specified and directed by Engr-in-Charge.

M & L for cement concrete type D-2 1:4:8 (using 40mm aggregate) as in foundations, filling and mass concrete

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets.

Dismantling timber scantlings fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section in unframed work.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete complete all as specified.

Taking down chowkat with shutter exc 1.5 sq.m but n.exc 4 Sqm each.

Taking down GI tubing 15 mm dia, connections.

Taking down GI tubing 25 mm dia, connections.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Dismantling of water tank exc 500 but n exc 1000 ltr capacity

Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-Charge.

Rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge.

Rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:6 finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 10 mm thick in cement mortar 1:6 on brick or concrete surfaces, finished even & smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber rame work complete, all as specified and directed by Engr-in-Charge

M&L 2nd class soft Wood as in plain fillets square, clean sawn exc. 13 sqcm but n.exc 25 sqcm in section, fixed with nails complete all as specified and directed.

M & L for Glazed ceramic coloured tiles of size 300x200x7 mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4), complete all as specified and directed by Engr-in-Charge.

S&F 0.5mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified

Moulding as in cornices picture rails and the like n exc 6sqcm

M&L second class wood designer Plain fillets square,rectangular or triangular in section, Exc 3Sqcm byt n.exc 6Sqcm, clean sawn, secured with nails or brads.

Second class soft wood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

Second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge.

S&F 100 mm butt hinges medim weight cold rolled mild steel fixed with screws or welded all as directed.

S&F anodised aluminium barrel tower bolt extruded sections 200 mm size.

S&F 150mm long, mild steel handles cast type, fitted.

S&F Mild steel slidig door bolt 300 mm long plate type slove enamelled black wioth bright bolt not less than 12mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed.

M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface.

Prepation of plastered or unplastered surfaces of walls and applying two coats of Cement base paint , complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors

Ditto- but 25mm dia.

S&F in repairs Bib taps15 mm bore,fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule and fixed in repair, complete all as specified and directed by Engr-in-Charge.

Supply and fixed Rotational moulded HDPE water storage tanks (Cylindrical vertical closed top), double wall construction, hoisted and fixed in position or placed in position inside or outside the building, connecting up pipes and securing access covers complete, 1000 Ltr capacity, complete all as specified and directed by Engr-in-Charge.

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe.

PVC (SWR) bends any radius of 110mm bore

Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, comp laid over including 15 mm thick screed bead in CM 1:4, complete all as specified and directed by Engr-in-Charge.

S & F in repairs Vitreous china wash basin, white, flat back, size 550X400 mm including waste pipe, bracket and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chain and plug, complete all as specified and directed by Engr-in-Charge.

S&Fin repir PVC low level flushing cistern 10 Ltr capacity with & including brackets for fixing to walls complete and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sq.cm , all as specified and as directed , fixed in repairs.

S & F in repairs for 15 mm pillar taps,cast copper alloy fancy type with chromium plated screwed down,screwed for iron pipe or for fixed in repairs.

M&L applying two coats of synthetic enamel paint incl preperation of steel or iron surfaces exc 10 cm girth or width, complete all as specified and directed.

Prepation of old or new surfaces of walls and applying two coats of oil bound distemper , complete all as specified and directed by Engr-in-Charge.

S&F 20 mm dia, 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches

Ditto but 32 mm dia

S&F grating doom 125 mm dia with or without hole

Demolition and breaking up PVC drain pipes

PVC connections 15mm size with PTMT nuts of length 450mm, all as specified and directed

S & F in repairs stainless steel squatting pan of pattern “long pan”, size 580 x 440 mm standard ivory with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe).

S&F in repairs Stop valves suitable for 15mm bore iron pipe, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed

Taking down cement or cement lime plaster on brick or stone wall , any description, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified & directed

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; for pipes of 110 mm bore complete all as specified & directed

S&F 110mm dia PVC (SWR) junction single,(single T) equal or unequal with access door complete all as specified & directed

M&L 75 mm thick cement concrete (1:3:6) type C2 as plinth protection complete all as specified & directed.

M&L for chequered cement concrete tiles 20x20x25mm thick, with grey cement and no pigments, set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in cement mortar in (1:4),complete all as specified and directed by Engr-in-Charge.

S & F 25mm dia gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed.

S&F in repairs vitreous china wash down water closet an (pedestal pattern), white (excluding fixing bolts, flusing cisten and flush pipe) complete all as specified and directed.

S&F in repairs plastic water closet seat, black,closed pattern with flat bottom, and cover and mild steel chronium plated of aluminised hinging device comple all as specified and directed.

S & F in repairs brass chomium plated tubular towal rail,20 mm dia,D type, 60 cm long between flagers.

Note : Deduction for amount of Rs 3,185.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S M A ENTERPRISE