Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC VILL SILPATA POST OFFICE PITHORAGARH DISTT PITHORAGARH UTTARAKHAND 262501 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262501 | L1 | Accepted-AOC Lowest Quoted bidder. | |
| 2 | L2₹28.8 L+₹6.5 L (29.4%)Rejected-Finance 121 GURU GOVIND SINGH MARG LAL KUAN LUCKNOW UTTAR PRADESH 226001 | LUCKNOW | UTTAR PRADESH | 226001 | L2 | Rejected-Finance Higher quoted bidder | |
| 3 | L3₹33.5 L+₹11.3 L (50.8%)Rejected-Finance 60 B C BAZAR AMBALA CANTT HARYANA 133001 | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance Higher quoted bidder. | |
| 4 | L4₹35.7 L+₹13.5 L (60.7%)Rejected-Finance | L4 | Rejected-Finance Higher quoted bidder. | |
| 5 | Rejected-Technical | - | Rejected-Technical DD not uploaded. |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
25 Jun 2022, 6:00 pmClosed
GE Pithoragarh
GE Pithoragarh Post Bharkatia Pithoragarh ( UK)PIN-262520
REPAIR / MAINT AND PAINTING OF CERTAIN WOODEN FURNITURE AT MIL STN PITHORAGARH
2022_MES_523346_2
8464/PGH/E8
Open Tender
Miscellaneous Works
Item Rate
330 days
GE Pithoragarh
Class D, Cat d(i)
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹70,000
Yes
15 Jul 2022
11 Jun 2022
27 Jun 2022
11 Jun 2022
25 Jun 2022
18 Jun 2022
Amount
DESCRIPTION OF ITEMS
Chair Easy FD-1108/229 S&F new components of 1st class HW (Teak) including dismantling unservice+B27able one all as specified and as directed. (a) Rear leg
(b) Front leg
(c) Arms
(d) Front/back/Side rail of seat as to match with the existing, made of Teak wood all as specified and directed
(e) S & F recanning seat & back in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.
(f) Preparation of surfaces by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.
Chair Writing/Chair CB Office with Arms FD-202/ 250/280 S&F new components of 1st class HW (Teak) including dismantling unserviceable one all as specified and as directed. (a) Rear leg
(b) Front leg
(c) Rear/front/Side rail
(d) Arms.
(e) Back rest
(f) Stiffener
(g) S & F recanning seat & back of the chair and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.
(h)Preparation of surfaces by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.
Chair Dining PBOR (FD/MAP-II/04) a) Repair/Removing U/S front legs and S&F of new front leg of existing size & Shape, made out of kiln seasoned 1st class hard wood teak, duly polished. Complete all as shown in drgs and as directed by Engr-in-Charge.
b) All as per item No 14 (a) above but rear legs of chair dining.
c) All as per item No 14 (a) above but front/rear rail of chair dining.
d) All as per item No 14 (a) above but side rail of chair dining.
d) All as per item No 14 (a) above but stiffener of chair dining.
e) Taking out and removing old U/S worn out plastic sheet and S & F new PVC Plastic sheets fixing of Bottom of plastic sheets
f) S & F new 25x3 mm flat iron in (two nos in each chair) 38cm Long to the bottom base of PVC seat for the durability of PVC Seat
g) Preparation of surfaces by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.
Trolley for TV ( FD/E6/MAP/04 (R)) a) Removing of old unserviceable 18/19mm prelaminated particle board and S&F new prelaminated particle board 18/19mm thick, pre-laminated particle board (three sides & top with edge of top moulded as shown in drg
b) Removing of old unserviceable 5.5mm thick openable unserviceable glass shutter with unserviceable magnetic catcher and S&F new glass shutter with magnetic catcher on front side as per drawings.
c) Removing of old unserviceable existing castor wheels and supply and fix new castor wheels as per drawing.
Dressing Mirror Gents (FD/E6/MAP/16 ) a) Removing of old broken Looking Mirror from Dressing Mirror Gents & S&F New Looking Mirror, 5mm thick for Dressing Mirror Gents as shown in drawing with 4mm thick 1st class hard wood teak beading all around the Mirror with suitable size of screws Complete all as shown in drgs & as directed Make of Atul/Saint Gobain/Swastik.
b) Removing of old broken shelves of Dressing Mirror Gents of 5mm thick plain glass including aluminium brackets and S&F new shelves with aluminium brackets for holding the shelves all as shown in drgs and as directed.
c) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Table Dressing Ladies with Mirror & Cushioned Stool ( FD/MAP-II/07) a) Removing of old broken unserviceable existing Looking Mirror from Table dressing Ladies and S&F New Looking Mirror of 5 mm thick for Table Dressing Ladies all as shown in drgs and as directed. Make of Mirror shall be Atul/Saint Gobain/Swastik.
b) Removing of old broken unserviceable existing heavy duty revolving nylon double wheels from stool cushioned and S&F new heavy duty revolving nylon double wheels in stool cushioned all as shown in drgs and as directed
c) Removing of old broken unserviceable existing the top and cushioned seat of the stool and supply and fix new top 12mm thick plywood openable and Cushioned Seat as shown in drg. The seat of the stool shall be 75mm high ,made of foam 40 density covered with tapestry cloth as approved by Engr-In-charge/GE.
d) Removing of old u/s sides of the cushioned Stool and S&F new sides as all as shown in drgs and as directed by Engr in Charge.
e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Table Dining 06 Person (Officer)(FD/E6/MAP-II/03) a) Removing of old unserviceable existing top of table & S&F new top of 18/19mm thick of size as shown in drawing, pre laminated particle board, one side teak finish decorated exterior grade and other side white including with 4mm thick 1st class hard wood teak beading all around the top fixed with suitable size of screws Complete all as shown in drgs and as directed.
b) Removing of old UNSV front/rear rail of Table Dining and S&F new front/rear rail as per existing shape & size made out of Ist class hard wood Teak duly French polished to match the existing surface glossy finish complete all as specified and as directed and shown on drg.
c) All as per item No 7.00 (a) above but side rail of Table Dining. Complete all as shown and directed.
d) All as per item No 7.00 (a) above but legs of Table Dining.
e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Table Dining 1200x900x760mm(FD/E6/MAP-II/03) a) Removing of old unserviceable existing top of table & S&F new top of 18/19mm thick of size as shown in drawing, pre laminated particle board, one side teak finish decorated exterior grade and other side white including with 4mm thick 1st class hard wood teak beading all around the top fixed with suitable size of screws Complete all as shown in drgs and as directed.
b) Removing of old UNSV front/rear rail of Table Dining and S&F new front/rear rail as per existing shape & size made out of Ist class hard wood Teak duly French polished to match the existing surface glossy finish complete all as specified and as directed and shown on drg.
c) All as per item No 8.00 (a) above but side rail of Table Dining. Complete all as shown and directed.
d) All as per item No 8.00 (a) above but legs of Table Dining.
e) Preparation of surfaces by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of theTable Dining 1200x900x760mm all as specified and directed.
Table Peg (FD- 277 & 236/384) S&F new components of 1st class HW (Teak) including dismantling unserviceable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Sofa sets 4/5 seats FD-281 S&F New components of 1st class HW (Teak) including dismantling unserviceable one all as specified and as directed. (a) Front Legs
(b) Rear legs
(c) Battens
(d) Back rail (3 seater)
(e) Front rail (3 seater)
(f) Back rail (single seater)
(g) Front rail (single seater)
(h) Hand rest
(j) Providing new cushion of 32 density cool foam of size 560 x 530x100mm thick complete all as specified and as directed. Make : sleepwell/Feather foam
(k) Providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality to cover the foam of size 560 x 530x100mm thick complete all specified and as directed. Note: Cost of tapestry cloth shall not be less than Rs. 250/- per metre.
(l)Material and Labour for high glossy melamine polishing in walnut shade of wooden furniture surfaces of Sofa duly removed the old surfaces with sand/emery paper removing the stains rectifying cracks and dents with filling materials like bees wax, chalk powder etc mixed with melamine polish (one or more coats as required), finish shall be uniform texture highly glossy including fixing 4 Nos nylon buffers at the bottom of the chairs complete all as specified & directed (i) Sofa set 4 seater
(m)Material and Labour for high glossy melamine polishing in walnut shade of wooden furniture surfaces of Sofa duly removed the old surfaces with sand/emery paper removing the stains rectifying cracks and dents with filling materials like bees wax, chalk powder etc mixed with melamine polish (one or more coats as required), finish shall be uniform texture highly glossy including fixing 4 Nos nylon buffers at the bottom of the chairs complete all as specified & directed (ii) Sofa set 5 seater
Chair Dinning Cushioned FD/E6/MAP/10 (R) S&F new components of 1st class HW (Teak) including dismantling unserviceable one all as specified and as directed. (a) Rear leg
(b) Front leg
(c) Side/back/front rails
(d) Stiffener
(e) Providing new Cushion of appropriate size of 32 density cool foam complete with dismantling old one as per sample held with GE Make- Sleepwell/Featherfoam.
(f) New tapestry cloth cover for cushion of approved shade & quality as per sample held with GE to cover the foam of appropriate size and dismantling old one. Note: Cost of tapestry cloth shall not be less than Rs. 250/- per metre.
(g) Material and Labour for high glossy melamine polishing in walnut shade of wooden furniture surfaces of Chair Dinning Cushioned duly removed the old surfaces with sand/emery paper removing the stains rectifying cracks and dents with filling materials like bees wax, chalk powder etc mixed with melamine polish (one or more coats as required), finish shall be uniform texture highly glossy including fixing 4 Nos nylon buffers at the bottom of the chairs complete all as specified & directed .
Bed Plywood Top (FD-245 & 246) S&F new components comprising of following outer member made of Teak Wood and internal frame made of cheer wood, covered both sides of board with 3.5 mm thick OST plywood with 12mm thick half cut teak wood beading including dismantling unserviceable one all as specified and as directed. (a) Head board
(b) Foot board
S&F new components of 2nd class HW (Teak Wood) including dismantling unserviceable one all as specified and as directed. (a) Long rail of size 90 x 35 mm
(b) Stiffner of size 60 x 40 mm
(c) Wooden bracket
(d) S&F top made of 12mm BWR phenol bonded commercial plywood with suitable screws including dismantling unserviceable one all as specified and as directed.
(e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Table Dining for 08 persons FD-30(M)/ 273 & 239 S&F new components of 1st class HW (Teak Wood) including dismantling unserviceable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top 18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.. .
Table dining for 06 persons FD-30(M)/ 273 & 239 S&F new components of 1st class HW (Teak Wood) including dismantling unserviceable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top 18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Teapoy (FD-382/ 232 & 278) S&F new components of 1st class HW (Teak Wood) including dismantling unserviceable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Table Centre (FD-274 & 235) S&F new components of 1st class HW (Teak) including dismantling unserviceable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Chair Dining FD-1105/279/203/228 S&F new components of 1st class HW (Teak) including dismantling unserviceable one complete all as shown in drgs and as directed by Engr-in-Charge. all as specified and as directed. (a) Rear leg
(b) Front leg
(c) Rear/front/side rail
(d) Stiffener
(e) Back rest
(f) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.
(g) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Table 900 x 600 mm with/ without drawer FD- 223 & 224 S&F new components of 1st class HW (Teak) including dismantling unserviceable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top rail (short/side)
(d) Top18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(e) Drawer made of 12mm thick commercial plywood and front side made of 18/19mm thick pre-laminated particle board one side laminated finish including provision of knob completed all as specified and directed.
(f) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Table 900 x 900 x 760 mm FD-273 S&F new components of 1st class HW (Teak) including dismantling unserviceable one all as specified and as directed. (a) Leg
(b) Top rail (long/front)
(c) Top18/19mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.
(d) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Side board FD-372 (a) S & F door shutters (both) made of 18/19mm thick Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round with fittings and fixtures including dismantling unserviceable one all as specified and as directed. Note :- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (ii) Hinges shall be 50 mm of approved quality.
(b) Front portion of the drawer as to match with the existing made out of 18mm thick Pre-laminated particle board with laminated finish and knob including dismantling unserviceable one all as specified and as directed.
(c) New top made out of 18/19mm thick Pre-laminated particle board with laminated finish duly providing 4mm thick teak wood beading all round including dismantling unserviceable one all as specified and as directed.
(d) 3.5mm thick one side teak face plywood on sides (both) including dismantling unserviceable one all as specified and as directed.
(e) Back made out of 6mm thick commercial ply wood including dismantling unserviceable one all as specified and as directed.
(f) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Table writing FD-249 & 275 (a) Top made out of 18/19 mm thick pre-laminated particle board one side laminated finish duly providing 4 mm thick teak wood beading all around including dismantling unserviceable one
S&F new components of 1st class HW (Teak) including dismantling unserviceable one all as specified and as directed. (b) Leg
(c) Leg (short)
(d) Side/bottom rail
(e) Back made out of 6 mm thick plywood commercial including dismantling unserviceable one all as specified and as directed.
(f) Side made out of 18/19 mm thick particle board one side laminated finish including dismantling unserviceable one all as specified and as directed
(g) Stiffner
(h) Drawer made out of 18/19 mm thick partical board one side laminated finish including provision of knob including dismantling unserviceable one all as specified and as directed. Note :- Knob shall be be aluminium anodised (Steel Colour) CP of approved size and quality
(j) Complete cupboard from the table writing and made of 18/19 mm thick pre-laminated particle board including back provided with 6mm thick commercial plywood including dismantling unserviceable one all as specified and as directed. Note :- (a) Knob shall be aluminium anodized (Dark Brown) CP of approved size & quality. (b) Hinges shall be 50 mm of approved quality.
(k) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Table Dressing Gents with mirror FD-230 (a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror and minor repairs including dismantling unserviceable one all as specified and as directed. Note : Make of Mirror should be of Modiguard/ST Gobain
(b) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable one all as specified and as directed.
(c) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Table Dressing Ladies with mirror FD-251 (a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror and minor repairs including dismantling unserviceable one all as specified and as directed. Note : Make of Mirror should be of Modiguard/St Gobain
(b) Drawer made of 12mm thick commercial plywood and front side made of 18/19mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable one all as specified and as directed.
(c) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Locker Bed Side FD-54(M) (a) CP Handle 100mm of standard quality including dismantling unserviceable one all as specified and as directed.
(b) Hasp & Staple of standard quality including dismantling unserviceable one all as specified and as directed.
(c) S&F 3.5/4mm thick Teak Face plywood to Top and both sides including dismantling unserviceable one all as specified and as directed.
(d) Partition made of 18/19mm thick shisham wood planks (not more than 3 pieces) including dismantling unserviceable one all as specified and as directed.
(e) Shelf made of 18mm thick shisham wood planks including dismantling unserviceable one all as specified and as directed.
(f) S& F 18/19mm thick prelaminated particle board on front side of the doors (both) including dismantling unserviceable one all as specified and as directed.
(g) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Stool Dressing CB (FD-252/374) S&F new components of 1st class HW (Teak Wood) including dismantling unserviceable one Complete all as shown in drgs and as directed by Engr-in-Charge. (a) legs
(b) Stiffeners rail.
(c) Side rail
(d) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.
(e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Table Bed Side (FD-248/210/276/157) S&F new components of S&F new components of 1st class HW (Teak wood) or 18/19mm thick prelaminated particle board mysore teak as shown in drg and as directed by Engr-in-Charge including dismantling unserviceable one. (a) TOP
(b) Sides
(c) Shelves
(d) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Hat Stand with Mirror (FD- 206 /233 ) S&F new components of 1st class HW (Teak Wood) or 04mm thick plywood commercial as shown in drg and as directed by Engr-in-Charge including dismantling unserviceable one. (a) Looking Mirror of 5 mm thick. (Make Modiguard/Saint Gobain/Atul)
(b) Brass hooks and hanger for hanging the Hat Stand as per drawing.
(c) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Bin Soiled Linen (FD- 244/ DB-4073 ) S&F new components of 1st class HW (Teak Wood) or 18mm thick commercial Particle board one side teak face as shown in drg and as directed by Engr-in-Charge including dismantling unserviceable one. (a) Top
(b) Unsv existing 3.5mm/4mm one side teak face ply wood of back side
(c) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.
(d) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Chair Wooden Bottom (FD-285 ) S&F new components of 1st class HW (Teak Wood) as shown in drg and as directed by Engr-in-Charge including dismantling unserviceable one. (a) Front Legs
(b) Rear Legs
(c) Stiffeners
(d) Seat (08 mm Commercial Plywood)
(e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Charpoy Wooden (FD -56/227) S&F new components of 1st class HW (Saal) as shown in drg and as directed by Engr-in-Charge including dismantling unserviceable one. (a) Long Rails
(b) Short Rails
(c) 12mm thick Commercial Plywood BWR
(d) Legs
(e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
TSR Wooden (FD-86M)) S&F new components of 1st class HW (Saal) as shown in drg and as directed by Engr-in-Charge including dismantling unserviceable one. (a) Long Rails
(b) Short Rails
(d) Legs
(e) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
Bin Linen Multipurpose (FD/E6/MAP/09) (a) S & F door shutters (both) made of 18/19mm thick Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round with fittings and fixtures including dismantling unserviceable one all as specified and as directed. Note :- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (ii) Hinges shall be 50 mm of approved quality.
(b) Front portion of the drawer as to match with the existing shade made out of 18mm thick Pre-laminated particle board with laminated finish and knob including dismantling unserviceable one all as specified and as directed.
(c) New top made out of 18/19mm thick Pre-laminated particle board as to match with the existing shade including dismantling unserviceable one all as specified and as directed.
(d) Removing of old unserviceable telescopic channel and S & F New telescopic channel for smooth movement of the drawer.
(e) Back made out of 12mm thick commercial plywood including dismantling unserviceable one all as specified and as directed.
(f) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed.
JAISWAL ENTERPRISES
M/s R.K.Jain
Anil jindal and sons
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .