Special Repair work to Barrack at Marine Task Force Commando Center at Naliya (Hothiwandh),Dist:- Kutch. (Including Electrification) (SBD)(3rd Attempt)

Name of Work :- Special Repair work to Barrack at Marine Task Force Commando Center at Naliya (Hothiwandh),Dist:-

Kutch .(Including Electrification)

:: SCHEDULE B ::

Statement showing the approximate quantities for the items of the above work to be carried out and

Approximate cost put to tender for Rs. 2015441.04 Sor - 2024/25

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

1 Removing and scraping of old deteriorated plaster of any thickness

fromm wall / R.C.C member including stacking of serviceable material 814.00 Rupees Nineteen and

and disposal of unserviceable from site of work with all lead and lift. Sixty Nine Paisa Only.

Dismentaling tiled of stone floors laid in mortar including stacking of

serviceable materilas and disposal of unserviceable materials with all 400.00 Rupees Forty Eight and

Sixty Three Paisa Only.

Providing 10 mm thick cement PLASTER in single coat on ceilings for

Rupees Two Hundred

interior plastering and finished even & smooth in C.M. 1: 3 ( 1 cement :

3 130.00 Sqm. 210.05 Ten and Five Paisa

sand ) including finishing with a floating coat of neat cement slurry at

Provinding 15 mm thick cement PLASTER in single coat on brick or

Rupees Two Hundred

concrete wall for interior plastering and finished even and smooth in C.M.

4 117.00 Sqm. 209.72 Nine and Seventy Two

1:4 ( 1 cement : 4 sand ) including finishing with floating coat of neat

cement slurry at GROUND FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on brick or

Rupees Two Hundred

concrete wall for interior plastering and finished even and smooth in C.M.

5 115.00 Sqm. 238.19 Thirty Eight and

1:4 ( 1 cement : 4 sand ) including finishing with floating coat of neat

Nineteen Paisa Only.

cement slurry at FIRST FLOOR.

Provinding 20 mm thick SAND FACED cement PLASTER on walls above

ground level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement Rupees Three Hundred

6 : 3 sand ) and 8mm thock finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) 454.00 Sqm. 312.56 Twelve and Fifty Six

etc. Complete for any height.

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste

pipe with "O" ring of ISI13592/92, Rate inclusive of all fittings like single

Rupees Two Hundred

or double "Y" with door, reducer, coupler single T with door bend

7 108.00 Rmt. 256.81 Fifty Six and Eighty One

including GI Slotted Z patti(minimum 1.6 mm thick) with minimum 6mm

dia.U Clamp with washer etc.complete and making good the wall ceiling

and floor. (A) 75mm dia

Provinding and fixing in position PVC COWEL VENT to pipe 75 mm dia

Rupees Sixteen and

8 directed. 8.00 No. 16.47

Forty Seven Paisa Only.

Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste

pipe with "O" ring of ISI13592/92, Rate inclusive of all fittings like single

or double "Y" with door, reducer, coupler single T with door bendincluding Rupees Four Hundred

9 GI Slotted Z patti(minimum 1.6 mm thick) with minimum 6mm dia.U 36.00 Rmt. 485.22 Eighty Five and Twenty

Two Paisa Only.

Clamp with washer etc.complete and making good the wall ceiling and

floor. (B) 110mm dia

Provinding and fixing in position PVC COWEL VENT to pipe 110 mm dia

Rupees Twenty Eight

10 directed. 4.00 No. 28.16

and Sixteen Paisa Only.

Celling painting (two coats) with plastic emulsion paint on undecorated

wall surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter and sand

papered smooth With Applying two coats of Fine Putty & One coats of Rupees One Hundred

11 primer on new wall surface to give an even shade including thoroughly 630.00 Sqm. 191.73 Ninety One and Seventy

Three Paisa Only.

brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth. paint, primer and putty shall be as per

approved make list of GSPHCL

Wall painting (two coats) with plastic emulsion paint on undecorated wall

surface to give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and sand papered

smooth With Applying two coats of Fine Putty One Coat of Primer on new Rupees One Hundred

wall surface to give an even shade including thoroughly brushing the 900.00 Sqm. 181.42 Eighty One and Forty

Two Paisa Only.

surface free from mortar dropping and other foreign matter and sand

papered smooth.paint, primer and putty shall be as per approved make

list of GSPHCLS.

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

Finishing wall with Weather proof exterior emulsion paint on wall surface

(Two Coat) over and above applying one coat of primer to give an

required shape even shade after throughly Brushing This surface to Rupees One Hundred

13 remove all Dirt and remains of loose poweder material etc. complete. 1078.00 Sqm. 153.35 Fifty Three and Thirty

Primer shall be exterior weather coat and Paint shall be Appex Weather Five Paisa Only.

Emulsion Only Paint and primer shall be as per approved make list of

Providing & Laying 24" x 24" vitrified 8 mm thick tile flooring over 20mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive material including Rupees One

dismentaling of existing flooring and jointed with color cement slurry Thousand Four

including finised with flush pointing & cleaning the surface etc.complete 18.00 Sqm. 1453.19 Hundred Fifty Three

for antiskid. Brand of the tiles shall be as per approved make list of and Nineteen Paisa

GSPHCL. Shade & Size of tiles shall be as specified in tender item.Size Only.

Provinding & laying Printed / Coloured GLAZED TILES 8 mm thick in Rupees One Thousand

skirting, risers of steps and DADO on 10mm thick cement plaster 1: 3 ( 1 Four Hundred Seventy

cement : 3 coarse sand ) & jointed with white cement slurry.(300mm x Three and Fifty Paisa

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring by adhesive

including dismentaling of existing flooring and material jointed with color Rupees One Thousand

16 cement slurry including finised with flush pointing & cleaning the surface 242.00 Sqm. 1724.00 Seven Hundred Twenty

etc.Completed Brand of the tiles shall be as per approved make list of Four Only

GSPHCL. Shade & Size of tiles shall be as specified in tender item.

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

Providing & Laying 24" x 24" in Skirting riser of steps and dado Double

Charge vitrified 8 to 10 mm thick tile over 10 mm thick Cement plaster of

cement mortar 1:3 (1 cement: 3 coarse sand) jointed with color cement Rupees One Thousand

17 slurry including finised with flush pointing & cleaning the surface etc. 13.75 Sqm. 1445.20 Four Hundred Forty Five

complete Brand of the tiles shall be as per approved make list of and Twenty Paisa Only.

GSPHCL. Shade & Size of tiles shall be as specified in tender item.

Providing & fixing to Concealed center point to wall, ceiling & floor

CPVC ( SDR 13.5 ) PIPE having National Sanitation foundation ( NSF )

Rupees Four Hundred

seal for potable water of following dia nominal bore tube fitting and

Forty Three and

18 including of GI Slotted Z patti(minimum 1.6 mm thick) with minimum 6mm 40.00 Rmt. 443.29

Twenty Nine Paisa

dia.U Clamp with washer making good the wall ceiling & floor etc.

Complete (excavation of earth in trenches and filling will be paid

separately)[E] 40 mm

Providing & fixing to Concealed center point to wall, ceiling & floor

CPVC ( SDR 13.5 ) PIPE having National Sanitation foundation ( NSF )

seal for potable water of following dia nominal bore tube fitting and

Hundred Thirty Four

19 including of GI Slotted Z patti(minimum 1.6 mm thick) with minimum 32.00 Rmt. 334.89

and Eighty Nine Paisa

6mm dia.U Clamp with washer making good the wall ceiling & floor etc.

Complete (excavation of earth in trenches and filling will be paid

separately)[D] 32 mm

Providing & fixing to Concealed center point to wall, ceiling & floor

CPVC ( SDR 13.5 ) PIPE having National Sanitation foundation ( NSF )

seal for potable water of following dia nominal bore tube fitting and Rupees Two Hundred

20 including of GI Slotted Z patti(minimum 1.6 mm thick) with minimum 6mm 42.00 Rmt. 206.73 Six and Seventy

dia.U Clamp with washer making good the wall ceiling & floor etc. Three Paisa Only.

Complete (excavation of earth in trenches and filling will be paid

separately)[B] 20 mm

Provinding and fixing gun metal check or non return full way WHEEL / Rupees Six Hundred

21 HANDLE VALVE 40 mm dia. 4.00 No. 656.86 Fifty Six and Eighty

Six Paisa Only.

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

Provinding and fixing gun metal check or non return full way WHEEL / Rupees Three

22 HANDLE VALVE 32 mm dia. 4.00 No. 311.61 Hundred Eleven and

Sixty One Paisa Only.

Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as Rupees Nine Hundred

23 per Detailed Drawings, Specifications and as per the Instruction of 28.00 No 990.61 Ninety and Sixty One

Engineer In charge. The Model & Make of Bib Tap Shall be as per the Paisa Only.

Approved Make List of GSPHCL.

Constructing brick masnory chamber for under ground C.I.Inspection

chamber and bends with Brick having crushing strength not less than

Kg/Sq.cm.in cement mortar 1:5,RCC top slab with1:3:6 in cement mortar

1:5 ( cover with 8 mm dia. steel @ 15 c/c and R.C.C. top slab with 1:2:4

mix ( 1 cement : 2 coarse sand,4- stone aggregates 20mm nominal size) Rupees Three

foundation cocrete 1:5:10 inside laster 15 mm th. c:m 1:3 finished smooth Thousand Seven

24 with a floating coat of neat cement on walls & bed concrete etc. 6.00 Nos. 3793.18 Hundred Ninety Three

complete. Rate are also inclusive of outside plaster 15mm thick in C.M and Eighteen Paisa

1:3 from top of chamber and all side upto 45cm deep below ground level Only.

(I) inside dimensions 455mm x 610mm and 450mm deep for Single or

multi purpose pipe line. Rate Also Inclusive RCC Frame with cover MD

10 ton (Rubber mould Finish) Inner Size 600 x 450mm with all necessary

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class

SN8 Structured Wall polyethelene Piping systems (Pipe with

online/offline coupler and elastomeric sealing ring) with non-smooth

External Annular Corrugated and Smooth Internal Surfaces (Double Wall)

for non-pressure underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to

the departmental stores etc. complete. (150mm ID Dia) Including

Lowering, laying and jointing of class SN 8 structured wall ( External

Annular Corrugated & Smooth Internal surface) Polyethylene Piping and Rupees Three

25 fittings with the help of coupler ( on line / off line ) attached with one end 64.00 Rmt. 396.00 Hundred Ninety Six

of pipes, sliding over the elastomeric sealing rubber ring placed on the Only

specified valley of the corrugation at the spigot end, lowering the same

into the trench, laying on the lower bedding (constructed at bottom of

trenches) at prescribed gradient,depth & alignment ,testing the water

tightness of the joints, ensuring the continuity tests of specified pipe

segments etc. complete as per drawing,specifications & detailed

engineering, including carriage of pipes & fittings from site stacks to the

place of laying etc. as per direction of Engineer-in-charge.

Providing and fixing solid PVC Flush Door shutter 24mm thick,made from

Co-extruded three layer rigid PVC foam sheet(single Extruded) with

density not less than 600kg/cbm outer layer (0.8-1mm)thick should be

rigid PVC with density of not less than 1400kg/cbm. Door should be water

proof,Termite proof ,fire retardant&having good screw holding Rupees Five Thousand

capacity.proviidng and fixing 100% Solid Wood Plastic composite(WPC) 14.00 Sqm. 5013.24 Thirteen and Twenty

Four Paisa Only.

Door Frame 90mmx45mm made from wood plastic composite(single

Extruded Process)material with density 780kg/cbm .all as per

specifications drawing as directed by the engineer in charge.

Removing & Refixing existing door or window with frame and shutter Rupees Three

including making good the damaged details cost of removing Hundred Twenty One

27 door/wondow ,frames and shutter and stacking the same after repairs 73.00 Sqm. 321.78

and Seventy Eight

fixing the same including two coats of oil paint Paisa Only.

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

Removing, providing and fixing Bajri glass 4mm thick bedded in putty Rupees Seven

and clips including cost of cutting glass removing old broken glass & Hundred Eight and

28 stacking as directed. 13.00 Sqm. 708.92

Ninety Two Paisa

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete &

M. I . fisher union, P.V.C water pipe with Connection from Stop Cock to

Pillar Tap,PVC Bottle Trap with connection 32mm dia. C.P. brassa waste Rupees Three

coupling with Connection 32mm dia waste Pipe up to N.T etc. Complete. Thousand Nine Hundred

29 Rate are inclusive of all matreials, Labour & Necessary Fittings etc. 3.00 No. 3935.33

Thirty Five and Thirty

Complet as per Detailed Drawings, Specifications and as per the Three Paisa Only.

Instruction of Engineer In charge. Materials used for the above items

Must be list approved by G.S.P.H.C.L.

Provinding and fixing 600mm x 450mm bevelled edge MIRROR of Rupees Eight

30 superior glass mounted on 6mm thick A.C. sheet or plywood sheet fixed 3.00 No. 850.90 Hundred Fifty and

to wooden plugs with C.P. brass screws & washers. Ninety Paisa Only.

Total Civil Amount Rs. (A)

ELECTRICAL WORK

31A Providing and erecting Point wiring with approved 1.1 KV Grade ISI mark 2 X 115.00 Point 425.00 Rupees Four Hundred

1.5 sq.mm. copper FRLS PVC insulated wire with 1.5 mm2 copper FRLS PVC Twenty Five Only

insulated wire for earth continuity in 25/32 white approved make press fit casing

capping with double locking arrangement with grooves, trunking of size not

below 10/12 mm in height IS:14927 ISI Part –II and with approved make white

accessories like inside and outside coupler, elbow, tee, junction boxes etc. Also

not below 1.8 mm thick duly sealed at joinst and 6 A. Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC /

Acrylic box, single mounting base frame covered with textured / metallic / white

front plate modules erected / flushed on wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector (make & model approved

by EIC and matching colur with switches accessories) as directed. For Open

wiring. For Light point. Cat-II

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

[Length of point wiring must not increase than 10 mtr. For that necessary switch

board and their location must be finalised before execution by agency otherwise

payment will not be done for extra long point. For future extention, if required,

agency has to erect one higher size box as per instruction of EIC & Wire must

be having box packing].

31B For Fan Point (with 6 A. Modular type switch and two module hum free 40.00 Point 612.00 Rupees Six Hundred

EME Five step type Electronic fan regulator both having ISI mark) Cat.-II Twelve Only

31C For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) 12.00 Point 455.00 Rupees Four Hundred

Cat.-II Fifty Five Only

31D For Looped on switch board (with 6 Amp.Switch & 3/5 pin socket both having 30.00 Point 234.00 Rupees Two Hundred

ISI mark) Cat.-II. Thirty Four Only

32A Providing and erecting Medium Class FIA approved and ISI mark white 100.00 Mtr. 24.00 Rupees Twenty Four

colour (embossed) RIGID PVC PIPES of following size complete erected with Only

necessary PVC fittings & Junction boxes fixed with adhesive solution & clamps

on / in wall / ceiling along with continuous fish wire to draw mains with necessary

fittings and junction boxes for following dia. (a) 20 mm. dia.

32B 25 mm dia. 50.00 Mtr. 33.00 Rupees Thirty Three

33A Mains with FRLS PVC Insulated wire in existing FIA approved ISI mark 250.00 Mtr. 62.00 Rupees Sixty Two Only

medium class 20 mm dia. white colour embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution erected / flushed on wall / ceiling along with

continuous G.I. fish wire to draw wires and laid in approved manner complete

with FRLS PVC insulated wire for earth continuity. (Approved ISI make only) [a]

2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains with

sq.mm. FRLS copper multi stranded conductor earthing as per standard colour

code. [From MCBDB to lighting Switch board power supply]

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

33B 2 X 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq. mm 200.00 Mtr. 146.00 Rupees One Hundred

FRLS copper multi stranded conductor earthing as per standard colour code. Fourty Six Only

34 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe 70.00 Mtr. 36.52 Rupees Thirty Six and

with necessary socket, PVC bushes saddle, Check-nuts etc. complete of Paisa Fifty Two Only

following sizes.

35 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked 14.00 Point 678.00 Rupees Six Hundred

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm Seventy Eight Only

(green) copper PVC insulated FRLS wire for earth continuity in FIA approved ISI

mark white colour medium class 20/25 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution erected in wall/slab along with

continuous G. I. fish wire to draw wires and laid in approved manner zari for

PVC pipe & boxes shall be filled with cement mortar & finishing the surface to

match the wall / ceiling complete with 16 Amp Modular type Swich and

accessories mounted in 20 G. GI company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall. (a) 16 Amp. Indicator

switch & 1 No. 6/16 A universal socket white colour suitable for 3/5 pin top

duly both having ISI mark. (Necessary sheet / tape / polythene / sand must be

erected or filled in all box To Prevent Mortor Going In To The Box) For Open

Wiring Cat.-II. (Conductor resistance should be as per IS:8130/1984)

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

36 Providing & Erecting 2.0 mtr. long Earthing system by making minimum 2.00 Each 7025.00 Rupees Seven

bore of 225 mm dia. in soft Thousand Twenty Five

soil. Suitable for doing pipe-in-pipe technology earthing. Earthing electric rod Only

must be made from

Corrosion free hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D.Class ISI mark of

Inner pipe: - 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand.

Terminal Size: 70 mm X

mm length, Terminal should be made from inner pipe for that pipe must be

pressed and gave

rectangular shape so its work as a terminal. The hot deep galvanising must be

done after above

process. Galvanised thickness must be minimum 75 micron anywhere. SS Nut

bolt:- 2 nos. with

washer suitable for 14 mm dia. hole must be provided at terminal. Total

minimum Weight (approx.)

of earth electrode with inside conductive material be 26 kg.

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/ meter testing as per

Voltage drop:- < 1 volt at no load & dry form, Sulphur content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain

moisture for long time.

Back Filling Compound weight is 50 Kg.

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm

and Cover should be heavy duty cast iron with required size of 300 mm X

mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Approved Make:- Sulah safe solution, Ashlok, Galexy, Indelec, Yansi earthlid}

(Strictly subject to

item specification only) OEM has to submit all detail & sample for approved

before supplying

Water must be poured in bore before starting earthing. Earthing value must be

measured with earth

tester. Agency has to bring the earth resistance to at least 02 ohms &

voltage between neutral &

Earthing upto 02 volt. Agency has to maintain earthing & its value for one

year. Earthing must be

done in the presence of A.E. (GSPHCL)

37 For above earthing additional charges for boring in hard rock soil (by breaker) & 2.00 Each 276.00 Rupees Two Hundred

filling soft soil in earth pit (certificate for soil have to given by DEE / AE along Seventy Six Only

with photographs)

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

38 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED 85.00 Each 370.00 Rupees Three Hundred

of Seventy Only

wattage 0.2W to 0.5W assemble on single MCPCB with housing use as a heat

sink shall be made from Aluminum extrusion having enough strength (sample

must be approved by EIC) with polycarbonate diffuser with following

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD : Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M)Surge protection : Min. 2KV

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing clamp design & strength should be sufficient to hold the fitting erected

on wall or ceiling.

(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to

submit 5 yrs free replacement Guarantee for complete Fixture) [Approval will be

given strictly subject to item specification

39 SITC of 3 W LED Lamps integral type, cool white with PC diffuser suitable for 20.00 Each 69.00 Rupees Sixty Nine Only

B22 Lamp holder

40 SITC of 8 W LED Lamps integral type, cool white with PC diffuser suitable for 45.00 Each 111.00 Rupees One Hundred

B22 Lamp holder Eleven Only

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

41 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 55.00 Each 1929.00 Rupees One Thousand

to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Nine Hundred Twenty

Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, Nine Only

(4) Power Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service

value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium

quality Ball bearing: Two, (9) Total Body: Top & Bottom should be alluminium,

(10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high grade

powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: min

MFD (15% Tolerance )as per is 1709-1984, Aluminium body premium quality,

Branded make,(14) Down road: up to 1.0 mtr as per site requirment, (15)

Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per site

requirment, (17) No vibration and noise due to mechanical parts. (Agency has to

erect safey wire with ceiling fan and checked with EIC) (OEM has to approved

model as per tender specification and tested at ERDA) (Necessary test reports

should be submitted strictly at the time of approval. Sample approved by EIC

subject to above specification only)

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

42 Providing ad erecting approved make single phase Double Door metal clad 5.00 Each 4906.00 Rupees Four Thousand

D.B. as per relevant indian standards ammended upto date. Nine Hundred Six Only

Supplying and fixing following way single phase MCB distrubution board of

company fabricated sheet box with powder coated inside and outside after apply

seven tank chemical process of CRCA sheet cover complete with suitable

integral single piece construction tinned copper busbar and link with all

necessary interconnection and with necessary size MS frame for mounting

MCBDB. MCBDB Door, Back side and Body of MCBDB must be made of

mm thick CRCA Sheet. Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank

Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing

link with isolation & Protecting Cover for 240 Volts on surface / recess complete

with loose wire box, terminal connectors for all incoming and outgoing circuits,

with suitable size FRLS PVC insulated copper conductor up to terminal blocks

and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral link,

tinned copper earth bar, din bar, detachable gland plate, interconnections,

powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing.

For 12 Way MCBDB: Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity

of 10 KA), 1 no. MCB 40 Amp. double pole switch (C curve confirms to IS:8828

having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL

suitable to operate on 240 Volt A.C. power. (6 Amp:- 3 Nos., 16 Amp:- 3 Nos. &

25 Amp: 2 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the external

edge with box cutting plaster) (Same colour MCB(SP/DP) should be used as

same as MCBDB) [Including Necessary numbering / marking on box done with

red colour radium sticker as per site requirement and instructions given by EIC

on site. Font / number size given by EIC on site as per requirement]

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

43 Providing ad erecting approved make single phase Double Door metal clad 1.00 Each 3639.00 Rupees Three

D.B. as per relevant indian standards ammended upto date. Thousand Six Hundred

Supplying and fixing following way single phase MCB distrubution board of Thirty Nine Only

company fabricated sheet box with powder coated inside and outside after apply

seven tank chemical process of CRCA sheet cover complete with suitable

integral single piece construction tinned copper busbar and link with all

necessary interconnection and with necessary size MS frame for mounting

MCBDB. MCBDB Door, Back side and Body of MCBDB must be made of

mm thick CRCA Sheet. Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank

Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing

link with isolation & Protecting Cover for 240 Volts on surface / recess complete

with loose wire box, terminal connectors for all incoming and outgoing circuits,

with suitable size FRLS PVC insulated copper conductor up to terminal blocks

and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral link,

tinned copper earth bar, din bar, detachable gland plate, interconnections,

powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing.

For 6 Way MCBDB: Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity

of 10 KA), 1 no. MCB 40 Amp. double pole switch (C curve confirms to IS:8828

having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL

suitable to operate on 240 Volt A.C. power. (6 Amp to 25 amp.:- 2 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the external

edge with box cutting plaster) (Same colour MCB(SP/DP) should be used as

same as MCBDB) [Including Necessary numbering / marking on box done with

red colour radium sticker as per site requirement and instructions given by EIC

on site. Font / number size given by EIC on site as per requirement]

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

44 Providing and Erecting Approved make ISI mark ELCB confirming to 1.00 Each 2213.00 Rupees Two Thousand

IS:12640/1988 having serial number printed on it and having sensitivity of 30 mA Two Hundred Thirteen

and breaking capacity of 10 KA and suitable for 240 V, 50 Hz having Only

characteristic of quick acting & Tripping with all advance feature & do not

incorporate any electronic component (mounted in MCBDB) Suitable for

operation on single phase 240 Volt max rating of (i) For 40 Amp. DP

45 Providing & Erecting 3 mm thick acrylic Sheet with grooving as directed 4000.00 Sq. 3.00 Rupees Three Only

46 Providing 2.5 mm.thick laminated acrylic sheet to cover the fan hook or 60.00 Each 18.00 Rupees Eighteen Only

47 Providing, erecting, Fabricating the M.S. structure as per requirement of site as 25.00 kg 75.10 Rupees Seventy Five

per structure design Including proper size approved by EIC of M.S. angles, and Paisa Ten Only

flats, bars, square pipe, channels, sections (Tata, Jindal, Asian, JSI Make)

complete with cutting, welding, grinding and finishing duly painted with

Asian/Nerolac make premium quality oil paint and true care red oxide metal

primer,asian paint make with erection on site as per direction of engineer in

charge with necessary grouting cementing, plastering and finishing complete. All

hole opening of square pipe end must be closed with M.S plate welding.

Payment will be done on KG as per Actual weight.

48 Supplying & erecting 12 mm thick backelite sheet of approved make and grade 2.00 Sq. 2289.00 Rupees Two Thousand

on existing 25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing Mtr. Two Hundred Eighty

ICDP SWITCH and energy meter (contractor shall make approved drawing of Nine Only

Bakelite sheet To arrange required No. of Energy meter & ICDP switch-busbar

etc. as per Actual space available in electrical room at site)

49 Providing & erecting Medium Voltage Danger Notice Board sticker as per 2.00 Each 69.00 Rupees Sixty Nine Only

language suggested by engineer incharge of standard size as per IS-2551

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

50 Providing & erecting 240 V MCB Double pole switch for M & I load (C curve) 7.00 Each 276.00 Rupees Two Hundred

having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box Seventy Six Only

having following capacity. For 40 Amp.

51 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 2.00 Each 730.00 Rupees Seven Hundred

Curve) having 10KA breaking capacity & confirms to IS:8828 in existing box Thirty Only

having following capacity. For 63 Amp.

52A Supplying & fixing box for housing RCCB + MCB combination made of 18 9.00 Each 272.00 Rupees Two Hundred

SWG sheet steel duly powder coated with gasket, dust & vermin proof bakelite Seventy Two Only

shield two earthing terminals for following type of RCCB, RCCB + MCB [a] For

52B For 4 pole 2.00 Each 442.00 Rupees Four Hundred

Fourty Two Only

53 Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 0.50 Rmt 4378.00 Rupees Four Thousand

GMS sheet dust & vermin proof having hinged door with rubber gasket and Three Hundred Seventy

necessary busbar supports with copper busbar having current density not more Eight Only

than 1.6 amp/sqmm (Rated current per Cross Section area) duly wired with

colour insulating tape for phase sequence, three phase & neutral Each equal &

one meter long suitable for following current capacity with necessary painting

mounted on wall or pedestal frame of required size with necessary incoming and

outgoing connections with proper size of copper strip/wire with lugs as directed.

Suitable for 100 Amp. capacity

54A Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi 100.00 Mtr. 56.00 Rupees Fifty Six Only

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS:694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if required. [e] One wire

6.00 sq. mm [For Meter to DPMCB Connection]

Sr. Estimated Amount

Description Qty Unit Amount

No. Figure In Words

54B For One wire 16.00 sq. mm [For Earthing ] 80.00 Mtr. 141.00 Rupees One Hundred

Fourty One Only

Total Electrical Amount Rs.

Total Amount (A + B)

Total Amount (A + B)

I/C Executive Engineer,

Signature of the Contractor GSPHC Ltd Rajkot