SPL REPAIR TO MT SHED AND COOK HOUSE IN BLDG NO OM-5 OFFRS MESS UNDER GE NORTH BINNAGURI

Amount

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

M&L for applying average 15mm thick plaster in two coats (10+5mm) with readymix pre-packed proportioned dry mix mortar, blended with PP fibres, top layer mixed with liquid water proofing compound on fair faces of brick wall or concrete surfaces additives on external surfaces including transporting of material, mixing, curing, scaffolding etc complete all as specified and as directed. Note : Liquid water proofing compound will be measured and paid separately as supply only in relevant item of Schedule 'A'.

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and as directed.

M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and fair without using extra cement. complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash wall surface complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of white wash wall surface complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash on ceiling surface complete all as specified and as directed.

Material & Labour preparation of new plastered surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90ltr/ 10sqm complete all as specified and as directed.

Material & Labour preparation of old plastered surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90ltr/ 10sqm complete all as specified and as directed.

S&F in repair steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars incl shop coat red oxide primer as per drag No CESZ/2018/TD-07, Sheet No 1/3 to 3/3 complete all as specified and as directed.

S&F figured glass, pin head type 3mm thick not exc. 0.5 Sqm in each in pane complete all as specified and as directed.

M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) Type C-2 (40 mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth without using extra cement complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.

M & L for 100 mm thick PCC 1:2:4 type B-2 , as in flooring and mass concrete using 40mm graded stone aggregate finishing cement concrete surface even and fair without using extra cement etc complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block with 50mm thick sand cushioning any shape and size confirming to IS- 15685-2006 of 80mm thick M-40 grade. complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping/benching to sides of foot path finished fair and even etc. complete all as specified and as directed.

Demolition reinforced cement concrete of roofs, floors (other than ground floors), beams, staircase, landings, chajjas, facia and similar suspended work complete all as specified and as directed.

M&L fro RCC 1;1.5:3 type A1 using 20mm graded stone aggregate as in chajjas, beams, roof, landing, shelf, platform, facia and like complete all as specified and as directed.

M&L for form work to chajjas , facia, roof, landing and like fro rough finished surface of concrete flat complete all as specified and as directed.

M&L for providing and laying of ready to use non shrink, cementations free flow micro concrete up to required thickness at designated areas to the prepared slurry tight shuttering with proper shear connection and bonding agent where ever necessary. Then applying fluid single component, cement based, micro-concrete repair material as per manufacturers instructions. The micro concrete shall contain no metallic aggregate, or chlorides and shall be shrinkage compensated in the plastic state. The micro concrete should achieve a compressive strength of 50 N/mm2 after 28 days at 30Degree Celcios a sper BS 4551-80. The unrestrained expansion shall be between 1-4% as per ASTM C827-1987. Again as per BS4551-80 the flexural strength shall not be less than 5 N/mm2 @28 days. The micro concrete shall have a coefficient of thermal expansion 10-12x10-6/C & thermal conductivity 1.5 W/m C The mixed density of micro concrete shall exceed 2100-2200Kg/m3 at 27o C complete all as specified and as directed. Note:- The above treatment will be done in presence of manufacturers authorised person and also by manufacturers skilled labour.

M&L for 25mm thick (Avg thickness) Guniting concrete surface using mechanical means with single component, shrinkage controlled, polymer modified, fibre reinforced structure grade cementitios repair mortar having compressive strength of 45 N/sqm, flexural strength of 7 N/sqm and tensile strength of 2.5 N/sqm at 28 days complete all as specified and as directed. Note:- The above treatment will be done in presence of manufacturers authorised person and also by manufacturers skilled labour.

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.

M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for applying single component acrylic polymer modified, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges, mixed with water proofing compound 200 ml per bag of cement or as per manufacturer instruction finished even and smooth on exposed concrete surface without using extra cement complete all as per specified and directed. (Note:- Water proofing compound shall be measured and paid separately under relevant item of schedule of 'A'.

M&L for waterproofing coating with polyurethane based water proofing liquid membrane to be applied by brush with multi coats with minimum dry film thickness of 1mm and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane complete all as specified and as directed. Note:- The above treatment will be carried out by authorised applicator of approved firm/ company.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed.

M & L for glazed ceramic colour/digital elevation tiles 300X 600 X 7-8 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile approved by Engr-in-Charge complete all as specified and as directed

M&L for 10mm thick rendering in CM (1:4) as in vertical surfaces of skirting dados repairs to steps complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in white or coloured cement to match as in floor complete all as specified and as directed.

M & L for 18- 20 mm thick machine cut pre polished Kota stone slab as in flooring over 15mm thick screed bed or bedding layer in CM (1:6) as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and as directed.

M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite complete all as specified and as directed.

M&L for 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 5mm) mixed with water proofing compound in top layer @2% by the weight of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. Note : Liquid water proofing compound will be measured and paid separately as supply only in relevant item of Schedule 'A'.

Demolition of brick work built in cement mortar of any description complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and as directed.

M&L for brickwork with fly ash bricks, old size, having compressive strength not less than 75Kg sqcm, straight or curved on plan exc 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified and as directed.

Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

S & F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified and as directed

S&F 15mm bore fancy type pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore. complete all as specified and as directed.

S&F in repair 15mm bore bib cock with wall flange complete all as specified and as directed.

S&F in repair 15 mm bore angle cock CP with flange complete all as specified and as directed .

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutter from the frame) each including Builders Hardware and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed.

S&F factory made Pressed steel frames confirming to IS, having profile of size 125 x 60 mm, 1.25 mm thick MS Sheet for doors with one or more rebates including necessary supply and fixing lugs, lock strike plate, etc. 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed.

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and as directed.

S&F 30 mm flush shutter, solid coarse construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail: paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing but partly glazed i.e. upper panel will be wire mesh fitted externally in the clear space & lower panel will be plain colour PVC sheet 5mm thick complete all as specified and as directed.

S& F of 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours articles n exc 200 cu. cm each complete all as specified and as directed.

S&F aluminum anodized barrel tower bolts of extruded section 200 mm long all as specified and as directed.

S&F aluminum handles 150mm size cast type anodized complete all as specified and directed

M&L for sliding door bolt of 300mm long plate Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminum alloy and fixed complete all as specified and as directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old wooden surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified complete all as specified and as directed.

M&L for providing and fixing factory made PVC sheet of required size as in cup boards consisting of 24mm thick solid PVC sandwich with 1mm thick plain PVC sheet on both sides suitably fixing , complete all as specified and as directed.

S&F Stainless steel barrel tower bolts 100mm long of extruded section and fixed complete all as specified and as directed.

S&F Aluminum handles 125mm long cast type anodized complete all as specified and as directed.

S & F 100mm long mild steel hinges bright finish suitable for modular kitchens complete all as specified and directed

S&F Magnet catches with size 9.6x7.7x6.6 cm and weight 260gm and striking plate including letting in and fixed complete all as specified and as directed.

S & F in repair stainless steel wire cloth 0.36 nominal dia wire & average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and as directed.

S&F factory made pressed steel windows and ventilators of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e. glazed & wire gaugeed shutter including all fittings like MS hold fast, box hinges, Handles , MS Tower Bolts ,Stoppers, hinges, MS stay with long screw, MS spring latch, MS Guard Bar/ grill etc complete with glazing bars including one shop coat of zinc chrome primer and dismantling of old existing one complete all as specified and as directed. Note:- (i) Rate quoted shall be deemed to be including of all fittings fixtures. (ii) Glass, wire mesh and painting only shall be measured and paid separately under relent items of Sch. (iii) The Drawings referred above are available in the office of Engr-in-Charge and can be referred in the office working hours if required. .

All as per item No 63 above but without glazing bars complete all as specified and as directed.

S&F of 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for RCC type A1,1:1.5:3 using 20mm graded aggregate slabs supported on walls, beams and columns in floors, shelves, platform lintel deck slabs and the like complete all as specified and as directed

Use and waste of form work to Slabs supported on walls, beams and columns in floors, shelves, platform, lintel, deck slabs and the like complete all as specified and as directed

Material and labour for Mild steel deformed or twisted bars (TMT) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns/slab/ as in ribs, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified and as directed.

INTERNAL ELECTRIFICATION Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LS (ISI markd) with proper colour coding as earth continuity conductor connected to common earth dolly , modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps.

(b) All as per item No 70 above but, One ceiling fan/Exhaust fan/Wall Fan point controlled by one way switch 5/6 amps.

(c) All as per item No 70 above but, One socket out let 5/6 amps point on the independent board

(d) All as per item No 70 above but, One socket out let 5/6 amps point on the same board

(d) All as per item No 70 above but, one bell point controlled by one way switch 5/6 amps

All as per item No 70 above but wiring with 2.5 sq mm single core multistranded copper conductor including provision of 2.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LS (ISI marked) with proper colour coding as earth continuity conductor connected to common earth dolly , for one socket out let 15/16 amps point on the independent board complete all as specified and as directed.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S&F Switch socket combination 2 and 3 Pin, 5/15 amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and as directed.

S & F in deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed.

S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S & F Energy saving new generation environmental friendly long life versatile pressure die cast aluminum IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unserviceable fitting complete all as specified and as directed.

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring complete all as specified and as directed. NOTE : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB"S/lsolators with and including taking down old one complete all as specified and as directed.

Supply and fixing of moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 160 Amps of breaking capacity 36 KA after and including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including taking down old one complete all as specified and as directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 4 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including taking down old one complete all as specified and as directed.

S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.

S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one as specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one as specified and as directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 3 of SSR Part- I including testing on complete all as specified and as directed.

M&L for point wiring complete for one power point for one metal plug & socket for AC or one socket for geyser point on independent board with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for Metal Plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F of Modular bell push, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed.

S & F Call bell Ding dong, 230 Volt single phase all as specified and directed.

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F of Decorative wall light fixture made up of polycarbonate suitable for 15 Watt LED retrofit of type B-22 base, IP66 grade, with and including 15 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed.

Taking down carefully Ceiling fan from its original position and refixing / hanging after B/R plaster work complete all as specified and as directed.

M&L painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc complete all as specified and as directed.

Supply and fixing of moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 125 Amps of breaking capacity 36 KA after and including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.

M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incoming cables, fixed with nuts & bolts & front side open able with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc complete all as specified and as directed.

S&F epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 Volts, C Series current carrying capacity 10 kA, incl necessary connection complete all as specified and as directed.

S. G. CONSTRUCTION (BID ID -3479193)

M/S Pradeep Enterprise (BID ID -3480599)

M/S RELIABLE CONSTRUCTION CO. (BID ID -3477239)

SHRI MANOIRANJAN BISWAS (BID ID -3476740)

M/S DELTA ENGINEERS & CO (BID ID -3476705)

M/S RATNESH KUMAR SINGH (BID ID -3478199)

NARAYAN MAJUMDER (BID ID -3478808)