Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹2.0 L
Closing Date
8 Apr 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
chief officer Talala Nagarpalika
CONSTRUCTION OF PROPOSE YOGA HALL, NATUROPATHY CENTER AND COMMON GARDEN AT TALALA DIST.GIR SOMNATH
290302
2025130001
Open
Civil Works
Junagadh
14 documents required · 14 mandatory
₹4,250
Chief Officer Talala Nagarpalika
₹2.0 L
25 Mar 2026
25 Mar 2026
25 Mar 2026
8 Apr 2026
25 Mar 2026
NAME OF WORK: - CONSTRUCTION OF PROPOSE YOGA HALL, NATUROPATHY CENTER AND
COMMON GARDEN AT TALALA DIST.GIR SOMNATH
SR. NO. DISCRIPTION AMOUNT
SCHEDULE CONSTRUCTION OF PROPOSE NATUROPATHY CENTER AT TALALA DIST.
B-1 GIR SOMNATH UNDER SJMMSVY SCHEME 2025-26
SCHEDULE CONSTRUCTION OF PROPOSE YOGA HALL AT TALALA DIST. GIR
B-2 SOMNATH UNDER SJMMSVY SCHEME 2025-26
SCHEDULE CONSTRUCTION OF PROPOSE COMMON GARDEN AT TALALA DIST. GIR
B-3 SOMNATH UNDER SJMMSVY SCHEME 2025-26
SCHEDULE PROPOSE BOREWELL IN NATUROPATHY CENTER AND YOGA HALL AT
B-4 TALALA MUNICIPALITY AREA TALALA DIST:GIR SOMNATH
SCHEDULE LED STREET LIGHTS FOR YOGA HALL, NATUROPATHY CENTER AND
B-5 COMMON GARDEN AT TALALA DIST. GIR SOMNATH UNDER SJMMSVY
SCHEDULE ELECTRIC WORK FOR PROPOSE NATUROPATHY CENTER AT TALALA DIST.
B-6 GIR SOMNATH UNDER SJMMSVY SCHEME 2025-26
SCHEDULE ELECTRICAL WORK OF PROPOSE YOGA HALL AT TALALA DIST- GIR-
B-7 SOMNATH UNDER SJMMSVY SCHEME 2025-26
SCHEDULE FIRE EXTENGUSHER SYSTEM FOR PROPOSE YOGA HALL AND
B-8 NATUROPATHY CENTER AT TALALA DIST. GIR SOMNATH UNDER
SJMMSVY SCHEME 2025-26
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount
mentioned above.
Tendered amount put to tender Rs.2,04,62,378.00 Tendered amount put to tender Rs.2,04,62,378.00
Deduct. % below Rs. Add.: % Above Rs.
President, Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
TALALA NAGARPALIKA
CONSTRUCTION OF PROPOSE NATUROPATHY CENTER AT TALALA DIST. GIR
SOMNATH UNDER SJMMSVY SCHEME 2025-26
Description Qty Unit Rate Amount
1 Excavation for foundation up to 1.5 Meter depth
including sorting out and stacking of useful
materials and disposing of excavated stuff up to
50 Meter lead (a) For Loose or Soft soil 77.92 cum 128.79
2 Excavation for foundation up to 1.5 Meter depth
including sorting out and stacking of useful
materials and disposing of excavated stuff up to
50 Meter lead (b) Dense or hard soil 77.92 cum 164.64
3 Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff
upto 50 Meter lead.(C) Hard Murrum 95.24 cum 281.73
4 Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff
upto 50 Meter lead.(D) Soft rock not requiring
Blasting 44.62 cum 289.40
5 Filling available excavated earth (excluding rock)
in trenches, plinth, sides of foundations etc. in
layers not exceeding 20 cm. In depth consolidating
each deposited layer by ramming and watering 129.06 cum 137.47
6 Filling in foundation and plinth with murrum or
selected soil in layers of 20 cm thickness including
watering, ramming and consolidating etc.
complete. 172.09 cum 307.41
7 Providing and laying cement concrete 1:2:4 (1-
cement : 2- coarse sand : 4- graded stone
aggregate 20 mm. Nominal size) and curing
complete excluding cost of form work in : (a)
Foundation 25.97 cum 3842.91
8 Providing and laying cement concrete 1:3:6 (1
Cement : 3- coarse sand :6- crushed stone
aggregate 40 mm. Nominal size) and curing
complete excluding cost of form work in :(a)plinth 44.20 cum 3281.49
9 Providing and laying controlled cement concrete
M.250 and curing complete including the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base
of columns and Mass concrete. (upto 10 ton)
RCC Column Footing 56.41 cum 4913.65
10 Providing and laying controlled cement concrete
M.250 and curing complete including the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base
of columns and Mass concrete. (upto 10 ton)
Column Up to Plinth level 2.96 cum 6763.97
11 Providing and laying controlled cement concrete
M.200 and curing complete including the cost of 22.32 cum 7123.53
formwork and reinforcement for reinforced
concrete work in (D) Columns, Pillars posts and
struts upto floor two level. (upto 10 ton) RCC
12 Providing and laying controlled cement concrete
M.250 and curing complete including the cost of
formwork and reinforcement for reinforced
concrete work in (C) Slabs, landing, shelves,
Balconies, Lintels, Beams, Girders and
Cantilever upto floor two level. (upto 10 ton) Plinth
Beam 38.32 cum 6835.68
13 Providing and laying controlled cement concrete
M.200 and curing complete including the cost of
formwork and reinforcement for reinforced
concrete work in (C) Slabs, landing, shelves,
Balconies Lintels, Beams, Girders and
Cantilever upto floor two level. (upto 10 ton) RCC
Floor Beams at Slab lvl. Ground Floor 55.31 cum 6122.62
14 Providing laying Controlled cement concrete M-200
and curing complete including the cost of form
work and excluding cost of reinforcement for
reinforced concrete work in : RCC Lintels Ground
Floor 17.51 cum 6158.98
15 Providing laying Controlled cement concrete M-200
and curing complete including the cost of form
work and excluding cost of reinforcement for
reinforced concrete work in : RCC Slabs &
Landings Ground Floor 94.31 cum 6923.55
16 Providing laying controlled cement concrete M-200
and curing complete including the cost of form
work and excluding cost of reinforcement for
reinforced concrete work in : RCC Chhajja/Sill
Ground Floor 5.53 cum 7218.47
17 Providing TMT Bar FE 500/500D reinforcement for
R.C.C. work including bending, binding, and
placing in position complete upto floor two level.
Ground Floor 36070.10 Kg. 77.29
18 Brick work using common burnt clay building
bricks having crushing strength not less than
kg./Sq.Cm. in superstructure above plinth in
Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)
Conventional 150.95 cum 4640.76
19 Half brick masonry in common brunt clay building
bricks having crushing strength not less than
Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-
coarse sand ) with 2 Nos of 6mm Mild steel round
bars after every three course embedded in Cement
Mortar in superstructure above plinth (B)
Conventional 89.36 cum 768.96
20 Providing 15 mm thick cement plaster in single
coat on fair side Brick/concrete walls for interior
plastering up to floor two level and finished even
and smooth in & Extra over items for finishing with
a floating coat of neat cement slurry. (ii) Cement
mortar 1:4 ( 1 cement : 4 sand) Ground Floor 641.28 Sqm 233.26
21 Providing 10 mm thick cement plaster in single
coat on ceiling and soffit of stair for interior
plastering up to floor two level and finished even
and smooth in & Extra over items for finishing with
a floating coat of neat cement slurry for plastering
on ceiling and soffits of stairs up to floor two level
instead of plastering on walls. (ii) Cement mortar
1:4 ( 1 cement : 4 sand) Ground Floor 341.42 Sqm 205.61
22 20 mm thick sand faced cement plaster on walls
upto height 10 meters above ground level
consisting of 12 mm thick backing coat of c.m. 1:3
(1:cement - 3:sand) and 8 mm thick finishing coat
of c.m. 1:1 (1:cement - 1:sand) etc. complete 1175.28 Sqm 358.72
23 Providing and laying white glazed tiles of 6 mm
thick in flooring, treads of steps and landing laid
on a bed of 12 mm thick cement mortar 1:3
(1:Cement - 3-Coarse Sand) finished with flush
pointing in white cement. 33.92 Sqm 909.91
24 Providing and laying white glazed tiles of 6 mm
thick in skirting of steps and dado on 10 mm thick
cement plaster 1:3 (1:Cement - 3-Coarse Sand)
and jointed with white cement slurry 59.13 Sqm 1127.48
25 Providing and laying Polished Granite slab (18mm
thick) slab flooring over 20mm (Average) thick
base of cement mortar 1:6 (1-cement : 6-Coarse
sand) or L.M. 1:1.5 laid over and jointed with grey
cement slurry including rubbing and polishing
complete (Basic Granite rate shall be 250/Sft) (A)
Granite slab 18mm thick 81.70 Sqm 4229.48
26 Providing and laying Polished Granite slab (18mm
thick) is riser of steps dedo and pillars laid 10mm
thick cement mortar 1:3 (1-cement : 3-coarse
sand) and jointed with grey cement slurry
including rubbing and polishing etc. complete
(Basic Granite rate shall be 250/Sft) 10.55 Sqm 4371.91
27 P & L 24" x 24" vitrified 8 mm thick tile flooring
over 20 mm (average) base of cement mortar 1:6
( 1 cement: 6 coarse sand) on new surface or
fixing on existing flooring by adhesive material
including dismantling of existing flooring and
jointed with colour cement slurry including finished
with flush pointing & cleaning the surface etc.
complete for antiskit (upto 10 ton) 465.54 Sqm 1472.91
28 Providing and laying broken china mosaic flooring
for terrace using 12 mm to 20 mm broken pieces
of glazed tiles to be laid over cement mortar 1:3
to plain or slope and to be tempered to bring
mortar crème out up to surface using white
cement including rounding off junctions and
extending them up to 15cm along the wall clearing
with water and oxalic acid etc. as directed 277.04 Sqm 779.70
29 Providing and fixing 35 mm thick shutters for
doors, windows and clerestory windows and
including indian teak wood frames 12 cm x 7 cm.
size including anodized alluminium fixtures and
fastenings including primer coat of approved 19.67 Sqm 5533.68
quality and two coats of oil painting etc, complete.
(ii) Fully Panelled.
30 Providing & fixing FRP Frame size 100 x 50 mm
and 28 mm thick FRP Depress Panel Shutter
having extra reinforcement on sides and edges
and gel coat finish. The core of the shutter is to be
filled up with injected fire retardant grade
polyurethane foam done insitu along with
embedded wooden pieces for stiffing and also for
taking hings anf fixtures. The whole FRP Frame
and shutter is to be waterproof weather proof
termite proof and resistance to mild acid / Alkali,
rates are to be inclusive of S.S. hings with
necessary screws and aluminium fixtures and
fastening 13.72 Sqm 2377.76
31 Providing and fixing window having extruded
aluminium Colour anodized section frame main
outer size 63.50 x 38.10 x 1.95 mm(of Jindal
Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal
two track member size 61.85 mm x 31.75 mm x
1.20mm (of Jindal Section no: 8687 @ wt.of
Kg/mt), vertical member of size 61.85 mm x
31.75mm x 1.30 mm (of Jindal Section no:8758 @
wt.of 0.0.659 Kg/mt) with sliding
shutters of horizontal member size 40mm x 18mm
x 1.29mm (of Jindal Section no:8949 @ wt.of
0.456Kg/mt), vertical member of size 40mm x
18mm x 1.29mm (of Jindal Section no:8947 @
wt.of 0.456Kg/mt/ Section 8948, @ Wt.
Kg/mt) with 5 mm thick transparent bronze colour
tinted float glass with powder coated aluminum
fittings and fixtures and transparent silicon sealant
glass fixing to frame as per details etc complete
for window. 40.01 Sqm 1713.70
32 Applying two coats of Birla or Asian acrylic lapy (
putty) & two coats of primer of approved brand
and manufacture on new wall surface to give an
even shade including thoroughly brushing the
surface free from mortar dropping and other
foreign matter and sand papered smooth. 982.70 Sqm 40.59
33 Wall painting (two coats) with plastic emulsion
paint of approved brand and manufacture on
undecorated wall surface to give an even shade
including throughly brushing the surface free from
mortar droppings and other foreign matter and
sand papered smooth. 641.28 Sqm 86.79
34 Wall painting (two coats) with plastic emulsion
paint of approved brand and manufacture on
undecorated wall surface to give an even shade
including throughly brushing the surface free from
mortar droppings and other foreign matter and
sand papered smooth. for ceiling and Soffit 982.70 Sqm 92.58
35 Finishing wall with weather proof exterior emulsion
paint on wall surface (two coats) to give an
required shape even shade after thoroughly
brushing the surface to remove all dirt, and
remains of loose powdered materials.etc complete 1175.28 Sqm 122.14
36 Providing and fixing to wall, ceiling and floor
Kgf/cm2 working pressure polyethylene pipes of
the following outside dia. Low density, complete
with special flange compression type fittings wall
clamps etc. including making good the wall, ceiling
and floor. (E) 50 mm. 50.00 Rmt 181.98
37 Providing laying and jointing in true line and level
15mm dia. U.P.V.C. pipe (SCH-40) for cold water
including fittings make PRINCE / SUPREME /
ASTRAL / FINOLEX or equuivalent as approved by
Engineer in charge. Pipe shall be fixed on the wall
with the help of clamp at every two metre C/C or
shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including
cost of all materials. 20.00 Rmt 72.65
38 Providing laying and jointing in true line and level
32mm dia. U.P.V.C. pipe (SCH-40) for cold water
including fittings make PRINCE / SUPREME /
ASTRAL / FINOLEX or equuivalent as approved by
Engineer in charge. Pipe shall be fixed on the wall
with the help of clamp at every two metre C/C or
shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including
cost of all materials. 20.00 Each 119.15
39 Providing and fixing PVC SWR Nahni Trap IS
14735 For Drain 100mm Diameter With jali of the
following nominal diameter of self cleansing design
with C.I. Scresd down or Hinged grating including
the cost of cutting and making. 16.00 Each 601.94
40 Providing and fixing C.I. Manhole cover 0.60 M. x
0.45M. size having weight not less than 35Kg. 1.00 Each 958.17
41 Constructing brick masonry chamber for under
ground C.I. Inspection chamber and bends with
bricks having crushing strength not less than
Kg/cm2 in cm. 1:5 C.I. Cover with frame (light
duty) 455 mm. X 610 mm. Internal dimensions,
total weight of cover with frame to be not less
than 38 Kgs. weight of cover 23 Kg. and wt. of
frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm. size ) foundation concrete
1:5:10 inside plaster 15 mm. thick with cement
mortar 1:3 finished smooth with a floating coat of
neat cement on walls & abed concrete etc.
complete (I) inside dimensions, 455 mm. 610 mm.
And 450 mm. Deep for single pipe line 4.00 Each 2932.93
42 Providing laying and jointing in true line and level
110mm diameter U.P.V.C. SWR type B pipe
conforming to IS 13592-1992 with one end plain
and other end socketed with rubbering, & fitting
conforming to ISI 14735-1999 of approved make
for drainage system pipe line, pipe shall be jointed
with each other with rubber lubricant, pipe shall be
fixed on wall using of PVC clamp of the size 30.00 Rmt 918.67
110mm dia. x 149 mm length x 145 mm high at
every 2000 mm center to center or shall be
concealed in walls as directed including necessary
fittings such as bends, shoes etc. including testing
of pipes and joints and jointed with adhesive
solvent cement including cost of all materials.
43 Providing and fixing in position cowl vent to pipes :
(I) 75 mm dia. 4.00 Each 393.04
44 Providing and fixing to wall ceiling and floor 1.0kg.
F/cm2 working pressure polythene pipes of the
following outside Dia. Low density, complete with
special falnge compression type fittings, wall clips
etc. including making good the wall ceiling and
floor. (F)75mm 50.00 Rmt 280.23
45 Providing and fixing screw down bib taps of
following size :
(A) Brass screw down bib tap polished bright (I)
15mm dia. 10.00 Each 186.83
46 Providing and fixing Pillar Tap, capstan head,
screw down high pressure with screws, shanks and
back nuts (A) 15 mm. Dia 8.00 Each 308.73
47 Providing and fixing chromium plated brass half
turn flush cock of approved quality including fixing
in pipe line etc. complete. (ii) 25 mm. Dia 8.00 Each 263.77
48 Providing and fixing C.I. Manhole cover 0.60m x
0.45m size having weight not less than 35 kgs. 4.00 Each 958.17
49 Providing erecting and fixing double coated coated
syntex PVC (ISI) water tank of required capacity
each with all necessary fittings and connection etc.
complete on terrace. 2000.00 Lit 3.95
50 Providing and fixing M.S. grills of required pattern
to wooden frames of windows etc. with M.S. flats
at required spacings and frame alround, square or
round bars with round headed bolts and nuts or by
screws. (A) Plain Grill. 1681.00 Kgs. 111.29
51 Applying priming coat over new steel and other
metel surface after and including preparing the
surface by throughly cleaning, oil,grease, dirt and
other foreign matter and scoured with brushes fine
steel wood, scrapers and sand paper with ready
mixed priming paint brushing red lead. 168.02 Sqm 38.50
52 Painting two coats (excluding priming coat) on
new steel and other metal surface with enamel
paint, brushing, interior to give an even shade
including cleaning the surface an even shade
including cleanicn the surface of all dirt, dust and
other foreign matter. 168.02 Sqm 96.59
53 Supplying and erecting RCC wooden types
benches as per detail design 2.00 Each 3666.30
54 Providing and fixing wsh down water closet
(European type, W.C. Pan) with integral P or S
trap including jointing the trap with soil pipe in
Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal
and cover to be measured and paid for
separately)(A) vitreous China Pattern :(i) in white
colour 8.00 Each 1356.81
55 Providing and fixing 100mm size P or S trap for
water closet squatting pan including jointing the
trap with the pan and soil pipe in cement Mortar
1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. 8.00 Each 348.22
56 Providing and fixing 12.5 Litres low level flushing
cistern with a pair, of C.I. or Mild brackets,
complete with fittings such as lead valve less
syphon, 15mm nom.nal size brass ball valve with
polythene float, C.P brass handle unions and
couplings for connections,with inlet, outlet and
overflow pipes, 40mm dia. porcelain enamelled
flush bend including cutting holes in walls and
making good the same connecting the flush bend
with cistern and closet (overflow pipe to be
measured and paid for separately)(A) Vitreous
China (I) In white colour 8.00 Each 2370.39
57 Providing and fixing in position with clamps etc.
32mm nominal internal diameter galvanised steel
tube flush pipe for high level flushing cistern
including connecting the flush pipe with cistern
and closet and making good the walls and floors. 8.00 Each 288.73
58 Providing and fixing G.I. inlet connection for flush
pipe with W.C. Pan 8.00 Each 29.40
59 Digging holes in ordinary soil and refilling the
same with the excavated earth mixed with manure
or sludge in the ratio of 2:1 by volume (2 parts of
stacked volume of earth after reduction by 20% :1
part of stacked volume of manure after reduction
by 8%) (2.14.3) Holes 60 cm dia, and 60 cm
deep 9.00 Each 44.19
60 Supplying and stacking of good earth at site
including royalty and carriage upto 5 km lead
complete (earth measured in stacks will be
reduced by 20% for payment). 1.03 Cum 520.76
61 Supplying and stacking of well decayed cattle
manure at site including royalty and carriage upto
5 k.m.lead complete (Cattle manure measured in
stacks will reduced by 8% for Payment). 0.50 Cum 249.98
62 Providing and stacking of Cassia fistula (Amaltash)
of height 120-135 cn. in big poly bags of size
cm as per direction of the officer-in-charge 3.00 Each 65.65
63 Providing and stacking of Azadirachta indica (
Neem ) of height 120-130cm in big polybag of size
25 cm as per direction of the officer in-charge. 3.00 Each 60.60
64 Providing and displaying of Rhapis Excelsa Palm
plant, having ht. 75 cm to 90 cm with 12 to
equal suckers, well developed, full of fresh &
healthy leaves from bottom to top in 25 cm size
Earthen pot/Plastic pot & as per direction of the
officer-in-charge. 3.00 Each 326.13
65 Plantation of Trees, Shrubs, and Hedge at site i/c
watering and removal of unserveiceable material's
as per direction of officer in charge (excluding cast
of plant & water) 2.57.1 Trees Plant 9.00 Each 7.37
66 Preparation of beds for hedging and shrubbery by
excavating| 60 cm deep and trenching the 17.64 Cum 225.08
excavated base to a further depth of 30 cm,
refilling the excavated earth after breaking clods
and mixing with sludge or manure in the ratio of
8:1 (8| parts of stacked volume of earth after
reduction by 20%: one part of stacked volume of
sludge or manure after reduction by 8%), flooding
with water, filling with earth if necessary, watering
and finally fine dressing, leveling etc. including
stacking and disposal of materials declared
unserviceable and surplus earth by spreading and
leveling as directed, within a lead of 50 m, lift up
to 1.5 m complete (cost of sludge, manure or
extra earth to be paid for separately)
67 Supplying and stacking of good earth at site
including royalty land carriage upto 5 km lead
complete (earth measured in stacks will be
reduced by 20% for payment). 14.66 Cum 520.76
Supplying and stacking of well decayed cattle
manure at sitel including royalty and carriage upto
5 k.m.lead complete (Cattle manure measured in
stacks will reduced by 8% for Payment). 2.17 Cum 249.98
Providing and Displaying Bougainvillea named
variety, Sobhra, Thima, Marry Palmar, Cherry
Blossom etc. well developed with fresh & healthy
bushy in full bloom 75 to 90 cm height in 40 cm.
cement pot as per direction of the officer-in-
charge. 98.00 Each 326.13
Plantation of Trees, Shrubs, and Hedge at site i/c
watering Jand removal of unserveiceable
70 material's as per direction of officer in charge
(excluding cast of plant & water) 2.57.2 Shrubs
Plant 131.00 Each 3.69
71 Providing and fixing M. S. tree guard 45 cm square
in plan, height 1.20 metre above ground level and
0.40 metre below ground level. The vertical
members shall consist of four nos. angle iron of
size 25x25x3 mm, 1.6 m long, one at each corner
and 8 nos flat iron of size 25x3 mm, 1.2 m long.
The vertical mambers shall be welded to 4 nos.
25x6 mm M. S. flats placed horizontally around
the vertical member of the cage. One name plate
of 1mm thick M.S. sheet of size 250x100 mm shall
be welded to the tree guard near the middle
height and lettered CPWD/ PWD/ any other
approved name. The tree guard shall be fixed to
the ground by making suitable holes and by
embedding four corners leg in the ground,
including refilling the earth, compaction etc.
complete. The tree guard shall be painted with two
or more coats of synthetic enamel paint of
approved brand and manufacture over a coat of
primer, complete in all respect. 9.00 Each 2241.44
72 Providing and fixing pre-cast concrete kerb stone
of gray cement based concrete block 30cm
length,30cm height and 15cm thick of M200 grade
concret as per approved design and including
excavation for fixing in proper line and level,filling 98.00 Rmt 421.72
the joint with C:M 1:3 (1cement:3fine sand) etc
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount
mentioned above.
Tendered amount put to tender Rs.2,04,62,378.00 Tendered amount put to tender Rs.2,04,62,378.00
Deduct. % below Rs. Add.: % Above Rs.
President, Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
TALALA NAGARPALIKA
CONSTRUCTION OF PROPOSE YOGA HALL AT TALALA DIST. GIR SOMNATH
UNDER SJMMSVY SCHEME 2025-26
Description Qty Unit Rate Amount
1 Excavation for foundation up to 1.5 Meter depth
including sorting out and stacking of useful
materials and disposing of excavated stuff up to
50 Meter lead (a) For Loose or Soft soil 78.41 cum 128.79
2 Excavation for foundation up to 1.5 Meter depth
including sorting out and stacking of useful
materials and disposing of excavated stuff up to
50 Meter lead (b) Dense or hard soil 78.41 cum 164.64
3 Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff
upto 50 Meter lead.(C) Hard Murrum 95.84 cum 281.73
4 Excavation for foundation upto 1.5 m depth
including sorting out and stacking of useful
materials and disposing off the excavated stuff
upto 50 Meter lead.(D) Soft rock not requiring
Blasting 44.62 cum 289.40
5 Filling available excavated earth (excluding rock)
in trenches, plinth, sides of foundations etc. in
layers not exceeding 20 cm. In depth consolidating
each deposited layer by ramming and watering 129.68 cum 137.47
6 Filling in foundation and plinth with murrum or
selected soil in layers of 20 cm thickness including
watering, ramming and consolidating etc.
complete. 189.49 cum 307.41
7 Providing and laying cement concrete 1:2:4 (1-
cement : 2- coarse sand : 4- graded stone
aggregate 20 mm. Nominal size) and curing
complete excluding cost of form work in : (a)
Foundation 26.14 cum 3842.91
8 Providing and laying cement concrete 1:3:6 (1
Cement : 3- coarse sand :6- crushed stone
aggregate 40 mm. Nominal size) and curing
complete excluding cost of form work in :(a)plinth 45.85 cum 3281.49
9 Providing and laying controlled cement concrete
M.250 and curing complete including the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base
of columns and Mass concrete. (upto 10 ton)
RCC Column Footing 56.86 cum 4913.65
10 Providing and laying controlled cement concrete
M.250 and curing complete including the cost of
formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, Base
of columns and Mass concrete. (upto 10 ton)
Column Up to Plinth level 3.08 cum 6763.97
11 Providing and laying controlled cement concrete
M.200 and curing complete including the cost of
formwork and reinforcement for reinforced 17.61 cum 7123.53
concrete work in (D) Columns, Pillars posts and
struts upto floor two level. (upto 10 ton)RCC
12 Providing and laying controlled cement concrete
M.250 and curing complete including the cost of
formwork and reinforcement for reinforced
concrete work in (C) Slabs, landing, shelves,
Balconies, Lintels, Beams, Girders and
Cantilever upto floor two level. (upto 10 ton)
Plinth Beam 31.91 cum 6835.68
13 Providing and laying controlled cement concrete
M.200 and curing complete including the cost of
formwork and reinforcement for reinforced
concrete work in (C) Slabs, landing, shelves,
Balconies Lintels, Beams, Girders and
Cantilever upto floor two level. (upto 10 ton) RCC
Floor Beams at Slab lvl. Ground Floor 27.75 cum 6122.62
14 Providing laying Controlled cement concrete M-200
and curing complete including the cost of form
work and excluding cost of reinforcement for
reinforced concrete work in : RCC Lintels Ground
Floor 8.43 cum 6158.98
15 Providing laying Controlled cement concrete M-200
and curing complete including the cost of form
work and excluding cost of reinforcement for
reinforced concrete work in : RCC Slabs &
Landings Ground Floor 54.73 cum 6923.55
16 Providing laying controlled cement concrete M-200
and curing complete including the cost of form
work and excluding cost of reinforcement for
reinforced concrete work in : RCC Chhajja/Sill
Ground Floor 4.22 cum 7218.47
17 Providing TMT Bar FE 500/500D reinforcement for
R.C.C. work including bending, binding, and
placing in position complete upto floor two level.
Ground Floor 23703.50 Kg. 77.29
18 Brick work using common burnt clay building
bricks having crushing strength not less than
kg./Sq.Cm. in superstructure above plinth in
Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)
Conventional 142.61 cum 4640.76
19 Half brick masonry in common brunt clay building
bricks having crushing strength not less than
Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-
coarse sand ) with 2 Nos of 6mm Mild steel round
bars after every three course embedded in Cement
Mortar in superstructure above plinth (B)
Conventional 19.61 cum 768.96
20 Providing 15 mm thick cement plaster in single
coat on fair side Brick/concrete walls for interior
plastering up to floor two level and finished even
and smooth in & Extra over items for finishing with
a floating coat of neat cement slurry. (ii) Cement
mortar 1:4 ( 1 cement : 4 sand) Ground Floor 567.86 Sqm 233.26
21 Providing 10 mm thick cement plaster in single
coat on ceiling and soffit of stair for interior 367.00 Sqm 205.61
plastering up to floor two level and finished even
and smooth in & Extra over items for finishing with
a floating coat of neat cement slurry for plastering
on ceiling and soffits of stairs up to floor two level
instead of plastering on walls. (ii) Cement mortar
1:4 ( 1 cement : 4 sand) Ground Floor
22 20 mm thick sand faced cement plaster on walls
upto height 10 meters above ground level
consisting of 12 mm thick backing coat of c.m. 1:3
(1:cement - 3:sand) and 8 mm thick finishing coat
of c.m. 1:1 (1:cement - 1:sand) etc. complete 1127.76 Sqm 358.72
23 Providing and laying white glazed tiles of 6 mm
thick in flooring, treads of steps and landing laid
on a bed of 12 mm thick cement mortar 1:3
(1:Cement - 3-Coarse Sand) finished with flush
pointing in white cement. 11.43 Sqm 909.91
24 Providing and laying white glazed tiles of 6 mm
thick in skirting of steps and dado on 10 mm thick
cement plaster 1:3 (1:Cement - 3-Coarse Sand)
and jointed with white cement slurry 31.86 Sqm 1127.48
25 Providing and laying Polished Granite slab (18mm
thick) slab flooring over 20mm (Average) thick
base of cement mortar 1:6 (1-cement : 6-Coarse
sand) or L.M. 1:1.5 laid over and jointed with grey
cement slurry including rubbing and polishing
complete (Basic Granite rate shall be 250/Sft) (A)
Granite slab 18mm thick 43.54 Sqm 4229.48
26 Providing and laying Polished Granite slab (18mm
thick) is riser of steps dedo and pillars laid 10mm
thick cement mortar 1:3 (1-cement : 3-coarse
sand) and jointed with grey cement slurry
including rubbing and polishing etc. complete
(Basic Granite rate shall be 250/Sft) 6.88 Sqm 4371.91
27 P & L 24" x 24" vitrified 8 mm thick tile flooring
over 20 mm (average) base of cement mortar 1:6
( 1 cement: 6 coarse sand) on new surface or
fixing on existing flooring by adhesive material
including dismentaling of existing flooring and
jointed with color cement slurry including finised
with flush pointing & cleaning the surface etc.
complete for antiskit (upto 10 ton) 292.00 Sqm 1472.91
28 Providing and laying broken china mosaic flooring
for terrace using 12 mm to 20 mm broken pieces
of glazed tiles to be laid over cement mortar 1:3
to plain or slope and to be tempered to bring
mortar crème out up to surface using white
cement including rounding off junctions and
extending them up to 15cm along the wall clearing
with water and oxalic acid etc. as directed 323.90 Sqm 779.70
29 Providing and fixing 35 mm thick shutters for
doors, windows and clerestory windows and
including indian teak wood frames 12 cm x 7 cm.
size including anodized aluminium fixtures and
fastenings including primer coat of approved
quality and two coats of oil painting etc, complete.
(ii) Fully Panelled. 17.49 Sqm 5533.68
30 Providing & fixing FRP Frame size 100 x 50 mm
and 28 mm thick FRP Depress Pannel Shutter
having extra reinforcement on sides and edges
and gel coat finish. The core of the shutter is to be
filled up with injected fire retardant grade
polyurethane foam done insitu along with
embedded wooden pieces for stiffing and also for
taking hings anf fixtures. The whole FRP Frame
and shutter is to be waterproof weather proof
termite proof and resistance to mild acid / Alkali,
rates are to be inclussive of S.S. hings with
necessary screws and alluminium fixtures and
fastening 8.99 Sqm 2377.76
31 Providing and fixing window having extruded
aluminum Colour anodized section frame main
outer size 63.50 x 38.10 x 1.95 mm(of Jindal
Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal
two track member size 61.85 mm x 31.75 mm x
1.20mm (of Jindal Section no: 8687 @ wt.of
Kg/mt), vertical member of size 61.85 mm x
31.75mm x 1.30 mm (of Jindal Section no:8758 @
wt.of 0.0.659 Kg/mt) with sliding
shutters of horizontal member size 40mm x 18mm
x 1.29mm (of Jindal Section no:8949 @ wt.of
0.456Kg/mt), vertical member of size 40mm x
18mm x 1.29mm (of Jindal Section no:8947 @
wt.of 0.456Kg/mt/ Section 8948, @ Wt.
Kg/mt) with 5 mm thick transparent bronze colour
tinted float glass with powder coated aluminum
fittings and fixtures and transparent silicon sealant
glass fixing to frame as per details etc complete
for window. 21.08 Sqm 1713.70
32 Applying two coats of Birla or Asian acrylic lapy (
putty) & two coats of primer of approved brand
and manufacture on new wall surface to give an
even shade including thoroughly brushing the
surface free from mortar dropping and other
foreign matter and sand papered smooth. 934.86 Sqm 40.59
33 Wall painting (two coats) with plastic emulsion
paint of approved brand and manufacture on
undecorated wall surface to give an even shade
including thoroughly brushing the surface free
from mortar droppings and other foreign matter
and sand papered smooth. 567.86 Sqm 86.79
34 Wall painting (two coats) with plastic emulsion
paint of approved brand and manufacture on
undecorated wall surface to give an even shade
including thoroughly brushing the surface free
from mortar droppings and other foreign matter
and sand papered smooth. for ceiling and Soffit 934.86 Sqm 92.58
35 Finishing wall with weather proof exterior emulsion
paint on wall surface (two coats) to give an
required shape even shade after thoroughly
brushing the surface to remove all dirt, and
remains of loose powdered materials.etc complete 1127.76 Sqm 122.14
36 Providing and fixing to wall, ceiling and floor
Kgf/cm2 working pressure polyethylene pipes of 50.00 Rmt 181.98
the following outside dia. Low density, complete
with special flange compression type fittings wall
clamps etc. including making good the wall, ceiling
and floor. (E) 50 mm.
37 Providing laying and jointing in true line and level
15mm dia. U.P.V.C. pipe (SCH-40) for cold water
including fittings make PRINCE / SUPREME /
ASTRAL / FINOLEX or equuivalent as approved by
Engineer in charge. Pipe shall be fixed on the wall
with the help of clamp at every two metre C/C or
shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including
cost of all materials. 20.00 Rmt 72.65
38 Providing laying and jointing in true line and level
32mm dia. U.P.V.C. pipe (SCH-40) for cold water
including fittings make PRINCE / SUPREME /
ASTRAL / FINOLEX or equuivalent as approved by
Engineer in charge. Pipe shall be fixed on the wall
with the help of clamp at every two metre C/C or
shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and
fixing the same with adhesive solvent, including
cost of all materials. 20.00 Each 119.15
39 Providing and fixing PVC SWR Nahni Trap IS
14735 For Drain 100mm Diameter With jali of the
following nominal diameter of self cleansing design
with C.I. Scresd down or Hinged grating including
the cost of cutting and making. 16.00 Each 601.94
40 Providing and fixing C.I. Manhole cover 0.60 M. x
0.45M. size having weight not less than 35Kg. 1.00 Each 958.17
41 Constructing brick masonry chamber for under
ground C.I. Inspection chamber and bends with
bricks having crushing strength not less than
Kg/cm2 in cm. 1:5 C.I. Cover with frame (light
duty) 455 mm. X 610 mm. Internal dimensions,
total weight of cover with frame to be not less
than 38 Kgs. weight of cover 23 Kg. and wt. of
frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm. size ) foundation concrete
1:5:10 inside plaster 15 mm. thick with cement
mortar 1:3 finished smooth with a floating coat of
neat cement on walls & abed concrete etc.
complete (I) inside dimensions, 455 mm. 610 mm.
And 450 mm. Deep for single pipe line 4.00 Each 2932.93
43 Providing laying and jointing in true line and level
110mm diameter U.P.V.C. SWR type B pipe
conforming to IS 13592-1992 with one end plain
and other end socketed with rubbering, & fitting
conforming to ISI 14735-1999 of approved make
for drainage system pipe line, pipe shall be jointed
with each other with rubber lubricant, pipe shall be
fixed on wall using of PVC clamp of the size
110mm dia. x 149 mm length x 145 mm high at
every 2000 mm center to center or shall be
concealed in walls as directed including necessary 30.00 Rmt 918.67
fittings such as bends, shoes etc. including testing
of pipes and joints and jointed with adhesive
solvent cement including cost of all materials.
43 Providing and fixing in position cowl vent to pipes :
(I) 75 mm dia. 4.00 Each 393.04
44 Providing and fixing to wall ceiling and floor 1.0kg.
F/cm2 working pressure polythene pipes of the
following outside Dia. Low density, complete with
special falnge compression type fittings, wall clips
etc. including making good the wall ceiling and
floor. (F)75mm 50.00 Rmt 280.23
45 Providing and fixing screw down bib taps of
following size :
(A) Brass screw down bib tap polished bright (I)
15mm dia. 10.00 Each 186.83
46 Providing and fixing Pillar Tap, capstan head,
screw down high pressure with screws, shanks and
back nuts (A) 15 mm. Dia 5.00 Each 308.73
47 Providing and fixing chromium plated brass half
turn flush cock of approved quality including fixing
in pipe line etc. complete. (ii) 25 mm. Dia 5.00 Each 263.77
48 Providing and fixing C.I. Manhole cover 0.60m x
0.45m size having weight not less than 35 kgs. 4.00 Each 958.17
49 Providing erecting and fixing double coated coated
syntex PVC (ISI) water tank of required capacity
each with all necessary fittings and connection etc.
complete on terrace. 2000.00 Lit 3.95
50 Providing and fixing M.S. grills of required pattern
to wooden frames of windows etc. with M.S. flats
at required spacings and frame alround, square or
round bars with round headed bolts and nuts or by
screws. (A) Plain Grill. 1059.00 Kgs. 111.29
51 Applying priming coat over new steel and other
metel surface after and including preparing the
surface by throughly cleaning, oil,grease, dirt and
other foreign matter and scoured with brushes fine
steel wood, scrapers and sand paper with ready
mixed priming paint brushing red lead. 105.90 Sqm 38.50
52 Painting two coats (excluding priming coat) on
new steel and other metal surface with enamel
paint, brushing, interior to give an even shade
including cleaning the surface an even shade
including cleanicn the surface of all dirt, dust and
other foreign matter. 105.90 Sqm 96.59
53 Supplying and erecting RCC wooden types
benches as per detail design 2.00 Each 3666.30
54 Providing and fixing wsh down water closet
(European type, W.C. Pan) with integral P or S
trap including jointing the trap with soil pipe in
Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal
and cover to be measured and paid for
separately)(A) vitreous China Pattern :(i) in white
colour 5.00 Each 1356.81
55 Providing and fixing 100mm size P or S trap for
water closet squatting pan including jointing the
trap with the pan and soil pipe in cement Mortar 5.00 Each 348.22
1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.
56 Providing and fixing 12.5 Litres low level flushing
cistern with a pair, of C.I. or Mild brackets,
complete with fittings such as lead valve less
syphon, 15mm nom.nal size brass ball valve with
polythene float, C.P brass handle unions and
couplings for connections,with inlet, outlet and
overflow pipes, 40mm dia. porcelain enamelled
flush bend including cutting holes in walls and
making good the same connecting the flush bend
with cistern and closet (overflow pipe to be
measured and paid for separately)(A) Vitreous
China (I) In white colour 5.00 Each 2370.39
57 Providing and fixing in position with clamps etc.
32mm nominal internal diameter galvanised steel
tube flush pipe for high level flushing cistern
including connecting the flush pipe with cistern
and closet and making good the walls and floors. 5.00 Each 288.73
58 Providing and fixing G.I. inlet connection for flush
pipe with W.C. Pan 5.00 Each 29.40
59 Providing and fixing Urinal of approved quality
including connection with trap and with integral
longitudinal flush pipe.(A) Squating plate pattern
white earthenware 550mm x 300mm. 2.00 Each 1709.59
60 Digging holes in ordinary soil and refilling the
same with the excavated earth mixed with manure
or sludge in the ratio of 2:1 by volume (2 parts of
stacked volume of earth after reduction by 20% :1
part of stacked volume of manure after reduction
by 8%) (2.14.3) Holes 60 cm dia, and 60 cm
deep 9.00 Each 44.19
61 Supplying and stacking of good earth at site
including royalty and carriage upto 5 km lead
complete (earth measured in stacks will be
reduced by 20% for payment). 1.03 Cum 520.76
62 Supplying and stacking of well decayed cattle
manure at site including royalty and carriage upto
5 k.m.lead complete (Cattle manure measured in
stacks will reduced by 8% for Payment). 0.50 Cum 249.98
63 Providing and stacking of Cassia fistula (Amaltash)
of height 120-135 cn. in big poly bags of size
cm as per direction of the officer-in-charge 3.00 Each 65.65
64 Providing and stacking of Azadirachta indica (
Neem ) of height 120-130cm in big polybag of size
25 cm as per direction of the officer in-charge. 3.00 Each 60.60
65 Providing and displaying of Rhapis Excelsa Palm
plant, having ht. 75 cm to 90 cm with 12 to
equal suckers, well developed, full of fresh &
healthy leaves from bottom to top in 25 cm size
Earthen pot/Plastic pot & as per direction of the
officer-in-charge. 3.00 Each 326.13
66 Plantation of Trees, Shrubs, and Hedge at site i/c
watering and removal of unserveiceable material's
as per direction of officer in charge (excluding cast
of plant & water) 2.57.1 Trees Plant 9.00 Each 7.37
67 Preparation of beds for hedging and shrubbery by
excavating| 60 cm deep and trenching the
excavated base to a further depth of 30 cm,
refilling the excavated earth after breaking clods
and mixing with sludge or manure in the ratio of
8:1 (8| parts of stacked volume of earth after
reduction by 20%: one part of stacked volume of
sludge or manure after reduction by 8%), flooding
with water, filling with earth if necessary, watering
and finally fine dressing, leveling etc. including
stacking and disposal of materials declared
unserviceable and surplus earth by spreading and
leveling as directed, within a lead of 50 m, lift up
to 1.5 m complete (cost of sludge, manure or
extra earth to be paid for separately)
68 Supplying and stacking of good earth at site
including royalty land carriage upto 5 km lead
complete (earth measured in stacks will be
reduced by 20% for payment). 14.66 Cum 520.76
Supplying and stacking of well decayed cattle
manure at sitel including royalty and carriage upto
5 k.m.lead complete (Cattle manure measured in
stacks will reduced by 8% for Payment). 2.17 Cum 249.98
Providing and Displaying Bougainvillea named
variety, Sobhra, Thima, Marry Palmar, Cherry
Blossom etc. well developed with fresh & healthy
bushy in full bloom 75 to 90 cm height in 40 cm.
cement pot as per direction of the officer-in-
charge. 98.00 Each 326.13
Plantation of Trees, Shrubs, and Hedge at site i/c
watering Jand removal of unserveiceable
71 material's as per direction of officer in charge
(excluding cast of plant & water) 2.57.2 Shrubs
Plant 131.00 Each 3.69
72 Providing and fixing M. S. tree guard 45 cm square
in plan, height 1.20 metre above ground level and
0.40 metre below ground level. The vertical
members shall consist of four nos. angle iron of
size 25x25x3 mm, 1.6 m long, one at each corner
and 8 nos flat iron of size 25x3 mm, 1.2 m long.
The vertical mambers shall be welded to 4 nos.
25x6 mm M. S. flats placed horizontally around
the vertical member of the cage. One name plate
of 1mm thick M.S. sheet of size 250x100 mm shall
be welded to the tree guard near the middle
height and lettered CPWD/ PWD/ any other
approved name. The tree guard shall be fixed to
the ground by making suitable holes and by
embedding four corners leg in the ground,
including refilling the earth, compaction etc.
complete. The tree guard shall be painted with two
or more coats of synthetic enamel paint of
approved brand and manufacture over a coat of
primer, complete in all respect. 9.00 Each 2241.44
73 Providing and fixing pre-cast concrete kerb stone
of gray cement based concrete block 30cm
length,30cm height and 15cm thick of M200 grade
concret as per approved design and including 98.00 Rmt 421.72
excavation for fixing in proper line and level,filling
the joint with C:M 1:3 (1cement:3fine sand) etc
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount
mentioned above.
Tendered amount put to tender Rs.2,04,62,378.00 Tendered amount put to tender Rs.2,04,62,378.00
Deduct. % below Rs. Add.: % Above Rs.
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
TALALA NAGARPALIKA
CONSTRUCTION OF PROPOSE COMMAN GARDEN AT TALALA DIST. GIR
SOMNATH UNDER SJMMSVY SCHEME 2025-26
Description Qty Unit Rate Amount
1 Excavation for foundation up to 1.5 Meter depth
including sorting out and stacking of useful materials
and disposing of excavated stuff up to 50 Meter lead
(a) For Loose or Soft soil 15.72 cum 128.79
2 Excavation for foundation up to 1.5 Meter depth
including sorting out and stacking of useful materials
and disposing of excavated stuff up to 50 Meter lead
(b) Dense or hard soil 15.72 cum 164.64
3 Excavation for foundation upto 1.5 m depth including
sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(C)
Hard Murrum 19.22 cum 281.73
4 Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not
exceeding 20 cm. In depth consolidating each
deposited layer by ramming and watering 19.74 cum 137.47
5 Filling in foundation and plinth with murrum or selected
soil in layers of 20 cm thickness including watering,
ramming and consolidating etc. complete. 12.61 cum 307.41
6 Providing and laying cement concrete 1:2:4 (1- cement
: 2- coarse sand : 4- graded stone aggregate 20 mm.
Nominal size) and curing complete excluding cost of
form work in : (a) Foundation 5.24 cum 3842.91
7 Providing and laying controlled cement concrete M.250
and curing complete including the cost of formwork
and reinforcement for reinforced concrete work in (A)
Foundations, footings, Base of columns and Mass
concrete. (upto 10 ton) RCC Column Footing 12.80 cum 4913.65
8 Providing and laying controlled cement concrete M.250
and curing complete including the cost of formwork
and reinforcement for reinforced concrete work in (A)
Foundations, footings, Base of columns and Mass
concrete. (upto 10 ton) Column Up to Plinth level 0.27 cum 6763.97
9 Providing and laying controlled cement concrete M.200
and curing complete including the cost of formwork
and reinforcement for reinforced concrete work in (D)
Columns, Pillars posts and struts upto floor two level.
(upto 10 ton)RCC Column GF 1.68 cum 7123.53
10 Providing and laying controlled cement concrete M.250
and curing complete including the cost of formwork
and reinforcement for reinforced concrete work in (C)
Slabs, landing, shelves, Balconies, Lintels, Beams,
Girders and Cantilever upto floor two level. (upto
ton) Plinth Beam 9.38 cum 6835.68
11 Providing laying Controlled cement concrete M-200 and
curing complete including the cost of form work and
excluding cost of reinforcement for reinforced concrete
work in : RCC Lintels Ground Floor 2.35 cum 6158.98
12 Providing TMT Bar FE 500/500D reinforcement for
R.C.C. work including bending, binding, and placing in
position complete upto floor two level. Ground Floor 1854.60 Kg. 77.29
13 Brick work using common burnt clay building bricks
having crushing strength not less than 35 kg./Sq.Cm.
in superstructure above plinth in Cement Mortar 1:6 (1-
Cement : 6 -fine sand)(B) Conventional 31.34 cum 4640.76
14 20 mm thick sand faced cement plaster on walls upto
height 10 meters above ground level consisting of
mm thick backing coat of c.m. 1:3 (1:cement - 3:sand)
and 8 mm thick finishing coat of c.m. 1:1 (1:cement -
1:sand) etc. complete 163.57 Sqm 358.72
15 Finishing wall with weather proof exterior emulsion
paint on wall surface (two coats) to give an required
shape even shade after thoroughly brushing the surface
to remove all dirt, and remains of loose powdered
materials.etc complete 163.57 Sqm 122.14
16 Providing and fixing M.S. grills of required pattern to
wooden frames of windows etc. with M.S. flats at
required spacings and frame alround, square or round
bars with round headed bolts and nuts or by screws.
(A) Plain Grill. 493.00 Kgs. 111.29
17 Applying priming coat over new steel and other metel
surface after and including preparing the surface by
throughly cleaning, oil,grease, dirt and other foreign
matter and scoured with brushes fine steel wood,
scrapers and sand paper with ready mixed priming
paint brushing red lead. 49.26 Sqm 38.50
18 Painting two coats (excluding priming coat) on new
steel and other metal surface with enamel paint,
brushing, interior to give an even shade including
cleaning the surface an even shade including cleaning
the surface of all dirt, dust and other foreign matter. 49.26 Sqm 96.59
19 Supplying and erecting RCC wooden types benches as
per detail design 20.00 Each 3666.30
20 Digging holes in ordinary soil and refilling the same
with the excavated earth mixed with manure or sludge
in the ratio of 2:1 by volume (2 parts of stacked
volume of earth after reduction by 20% :1 part of
stacked volume of manure after reduction by 8%)
(2.14.3) Holes 60 cm dia, and 60 cm deep 15.00 Each 44.19
21 Supplying and stacking of good earth at site including
royalty and carriage upto 5 km lead complete (earth
measured in stacks will be reduced by 20% for
payment). 230.46 Cum 520.76
22 Supplying and stacking of well decayed cattle manure
at site including royalty and carriage upto 5 k.m.lead
complete (Cattle manure measured in stacks will
reduced by 8% for Payment). 0.84 Cum 249.98
23 Providing and stacking of Cassia fistula (Amaltash) of
height 120-135 cn. in big poly bags of size 25 cm as
per direction of the officer-in-charge 5.00 Each 65.65
24 Providing and stacking of Azadirachta indica ( Neem )
of height 120-130cm in big polybag of size 25 cm as
per direction of the officer in-charge. 5.00 Each 60.60
25 Providing and displaying of Rhapis Excelsa Palm plant, 5.00 Each 326.13
having ht. 75 cm to 90 cm with 12 to 15 equal suckers,
well developed, full of fresh & healthy leaves from
bottom to top in 25 cm size Earthen pot/Plastic pot &
as per direction of the officer-in-charge.
26 Plantation of Trees, Shrubs, and Hedge at site i/c
watering and removal of unserviceable material's as per
direction of officer in charge (excluding cast of plant &
water) 2.57.1 Trees Plant 15.00 Each 7.37
27 Preparation of beds for hedging and shrubbery by
excavating| 60 cm deep and trenching the excavated
base to a further depth of 30 cm, refilling the
excavated earth after breaking clods and mixing with
sludge or manure in the ratio of 8:1 (8| parts of
stacked volume of earth after reduction by 20%: one
part of stacked volume of sludge or manure after
reduction by 8%), flooding with water, filling with earth
if necessary, watering and finally fine dressing, leveling
etc. including stacking and disposal of materials
declared unserviceable and surplus earth by spreading
and leveling as directed, within a lead of 50 m, lift up
to 1.5 m complete (cost of sludge, manure or extra
earth to be paid for separately) 32.40 Cum 225.08
28 Supplying and stacking of good earth at site including
royalty land carriage upto 5 km lead complete (earth
measured in stacks will be reduced by 20% for
payment). 537.73 Cum 520.76
Supplying and stacking of well decayed cattle manure
at sitel including royalty and carriage upto 5 k.m.lead
complete (Cattle manure measured in stacks will
reduced by 8% for Payment). 255.57 Cum 249.98
Providing and Displaying Bougainvillea named variety,
Sobhra, Thima, Marry Palmar, Cherry Blossom etc. well
30 developed with fresh & healthy bushy in full bloom
to 90 cm height in 40 cm. cement pot as per direction
of the officer-in-charge. 180.00 Each 326.13
Plantation of Trees, Shrubs, and Hedge at site i/c
watering Jand removal of unserveiceable material's as
per direction of officer in charge (excluding cast of plant
& water) 2.57.2 Shrubs Plant 180.00 Each 3.69
32 Providing and fixing M. S. tree guard 45 cm square in
plan, height 1.20 metre above ground level and
metre below ground level. The vertical members shall
consist of four nos. angle iron of size 25x25x3 mm,
m long, one at each corner and 8 nos flat iron of size
25x3 mm, 1.2 m long. The vertical mambers shall be
welded to 4 nos. 25x6 mm M. S. flats placed
horizontally around the vertical member of the cage.
One name plate of 1mm thick M.S. sheet of size
250x100 mm shall be welded to the tree guard near
the middle height and lettered CPWD/ PWD/ any other
approved name. The tree guard shall be fixed to the
ground by making suitable holes and by embedding
four corners leg in the ground, including refilling the
earth, compaction etc. complete. The tree guard shall
be painted with two or more coats of synthetic enamel
paint of approved brand and manufacture over a coat
of primer, complete in all respect. 15.00 Each 2241.44
33 Trenching in ordinary soil up to a depth of 60 cm
including removal and stacking of serviceable materials
and then disposing of surplus soil, by spreading and
neatly levelling within a lead of 50 m and making up
the trenched area to proper levels by filling with earth
or earth mixed with sludge or / and manure before and
after flooding trench with water (excluding cost of
imported earth, sludge or manure).. 228.72 Cum 78.88
34 Grassing with selection No. 1 Doob grass including
watering and maintenance of the lawn for 30 days or
more till the grass forms a thick lawn, free from weeds
and fit for mowing including supplying good earth, if
needed. In rows 5 cm apart in both directions With
grass Turf 762.39 Sqm 31.31
35 Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm length,30cm
height and 15cm thick of M200 grade concret as per
approved design and including excavation for fixing in
proper line and level,filling the joint with C:M 1:3
(1cement:3fine sand) etc complete. 240.00 Rmt 421.72
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount
mentioned above.
Tendered amount put to tender Rs.2,04,62,378.00 Tendered amount put to tender Rs.2,04,62,378.00
Deduct. % below Rs. Add.: % Above Rs.
President, Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
TALALA NAGARPALIKA
PROPOSE BOREWELL IN NATUROPATHY CENTER AND YOGA HALL AT TALALA
MUNICIPALITY AREA TALALA DIST:GIR SOMNATH
Quantity unit Description Rate Amount
1 Geo-hydrological Ground Water Investigation
Geo-hydrological ground water investigation
including vehicle charges.
(b) For three phase DTH bore / DR tube well
including water sample testing charges
2 Bore Hole 200 / 215mm
Drilling of 200 / 215 mm dia. bore hole in
overburden strata by DTH rig up to required depth
including fixing of 175 / 180 dia MS ERW / PVC
casing pipe & further drilling of 165 mm dia. bore
hole in hard rock (trap etc.) strata by DTH drilling
method up to total depth of 300 meters including
measuring the yield by V notch and flushing of bore
etc. complete in all districts of Zone V.( Casing up
150.00 Mtr From 0 to 150 meters depth 264.00
Bore plug of 100 mm height made from MS plate
with 3 holes at equal distance on circumference for
nut-bolts type, locking arrangement with nutsbolts
& lock nuts of standard make.
From 5 thick MS plateSuitable for 200 mm dia.
Clamps made from MS plate with 3 holes on either
4 side with nuts & bolts of standard make and
450 mm X 65 mm X 10 mm flat suitable to 50 mm
Providing and supplying in standard length ISI
mark high density Polyethylene H.D.P.E. Pipes
suitable for potable water as per IS specification
no. 4984/1995 including all local and central taxes,
transportation, freight charges, octroi, inspection
charges, loading, unloading, conveyance to the
dept. stores etc. comp.
NOTE:(1) Rate for HDPE (PE-100) Pipe based on
the rate of HDPE Resin as Rs. 121185/MT (Price
140.00 Rmt 50MM Dia - 10.0 Kg/cm2 81.00
6 3 Phase Borewell Submersible Pump Sets
Electric motor driven borewell submersible pump
set confirming to IS 8034 and motor confirming to
IS 9283 working at 3 phase 400 / 440 volt 50 Hz
AC supply & 2900 RPM.
1.00 No. Cat. No. 1.4, 10 HP, 180 MTR HEAD, 90 LPM 28512.00
Star Delta starter suitable for local & remote pump
control application consisting of MPCB, overload
relay and contactors as per Type II coordination
including digital voltmeter, analogue ammeter with
selector switch, run hour meter, required protective
relays & control accessories.
1.00 No. S. D. from 8 to 10 HP 9128.00
PVC insulated flat submersible cable as per detailed
technical specifications of R/C of GWSSB
conforming to IS 694, IEC 60227 /
Note:-Above rates of Flat PVC copper cables are
based on IEEMA circular no. IEEMA (PVC) Cable/11
of 2021 issued on Dtd. 03.12.2021 (Month of
November-2021). Base price of electrolytic copper
wire Rod is Rs.7,75,614 /MT and Base price of PVC
compund is Rs.1,93,325/M.T. of grade CW-
22.(without GST)
Supplying and erecting funnel type Earthing having
earth plate of following size buried in specifically
prepared earth pit 3 mtr. Below ground with 40Kg
charcoal and salt with alternate layers of charcoal
and salt, 20 mm dia GI pipe with funnel with a wire
mesh for watering and bricks masonry block CI
Cover complete as per Para 7.3 of IS 3043 with
necessary length of double GI/Copper earth wire
No. 6 SWG bolted with lug to the plate and covered
in 12 mm dia GI pipe 2.5 mtr. Long Complete
connected to the nearest switch gear with end
socket as per direction and duly tested by earth
tester confirming to ISS ( As per drawing ) with
following Specification.
1.00 Each D. With 60x 60 x 0.315cms CI earth plate 7797.00
10 22.50 KW 3 PHASE ELECTRIC CONNECTION
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount
mentioned above.
Tendered amount put to tender Rs.2,04,62,378.00 Tendered amount put to tender Rs.2,04,62,378.00
Deduct. % below Rs. Add.: % Above Rs.
President, Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
TALALA NAGARPALIKA - TALALA
ESTIMATE FOR LED STREET LIGHTS FOR YOGA HALL, NATUROPATHY CENTER AND
COMMON GARDEN AT TALALA DIST. GIR SOMNATH UNDER SJMMSVY SCHEME 2025-26
Description Qty Unit Rate Amount
Mains with 1.1 KV Grade FRPVC insulated ISI marked standard
copper conductor wire in existing pipe erected with 1.5 sq.mm.
copper conductor FR PVC insulated standard wire of green color
for earth continuity of following size. c) 3 wire 1.5 sq.mm. 156.00 Mtr 62.62
Supplying and erecting LED street light / Flood light fittings
with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w
and corrosion free High pressure die cast aluminum housing
with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses, with
toughened glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more than 0.95, THD <
10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire
2 efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(
fittings required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV integral and
,Light must have 440VAC line supply with over-voltage
(i) above 36 to 48 watts
Cat-lll 26.00 Ea. 3345.12
Providing and erecting Miniature circuit breaker single pole
0.5A to 2A system and having breaking capacity 10 KA to be
erected in existing box. confirming to IS 8828/1996 with ISI
Mark - Cat-III 26.00 Ea. 270.68
Providing & erecting 415V MCB Four Pole Switch for Lighting
Load (B curve) having 10KA breaking capacity & confirms to IS
:8828 in existing box having following capacity (a) 6 to 32 A.
Cat - III 1.00 Ea. 578.73
Approved make ELCBs / RCCBs conforming to IS: 12640 and
having sensitivity of 30 mA and Short Circuit withstand
capacity of 6 KA and suitable for operation on 3 phase and
5 neutral 415V. having characteristic of quick action & tripping
with all advance feature & do not incorporate any electronic
component for following Max. rating erected as directed. (ii)
40 Amps. FP cat - III 1.00 Ea. 2637.11
Pipe type earthing having 150 cms. Long and 2.5 cms. Dia.
Galvanised iron pipe with coupling and bunch burried in
specially prepared earth pit complete with necessary 8 SWG
earth wire. 26.00 Ea. 368.65
for using salt and charcoal/coke as required for pipe type
earthing 26.00 Ea. 171.70
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured
cable multistrand / Solid Aluminium conductor for 1.1 KV. to
be laid on wall with necessary clamps or in existing trench /
pipe of following size of cables (B) 4 core 6 Sq. mm 480.00 Mtr 126.25
Making trench in soft soil of suitable width of 90 cms deep for
9 laying cable or locating the fault all over the run and
backfilling the same and making the surface as normal ground. 390.00 Mtr 55.55
Providing & laying approved make Double walled corrugated
pipes (DWC) of polyethylene(conforming to IS 14930 II )with
necessary connecting accessories of same material at required
depth for laying of cable. below ground / road surface for 416.00 Mtr 62.62
enclosing cable and back filling the same to make ground as
per original. (A) 50 mm dia
Solderless crimping type aluminium lugs conforming to IS
suitable for cable of following size evenly crimped with high
11 pressure tool & connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved manner. (A)
Supply of approved make GRP / FRP Pole having following
specifications: GRP Light Pole made by CNC filament winding
machine using thermoset resin polyester/epoxy resin system)
having minimum 62% glass content. The pole should be in one
piece and tapered round in shape, having smooth finish and
should be totally free from corrosion as well as non conductive
& shock proof Pole should be provided with FRP Anchor Base
and it should be heavy duty, or MS Material duly painted with
Epoxy paint. Pole should be flame retardant as per IS
Resin used shall be UV resistance and pigmented.
A highly weather resistant polyurethane coating shall be
applied to the pole after applying suitable primer system that
ensures proper adhesion of the paint. Minimum coating
thickness shall be 80 to 100 micron. Deflection of the pole shall
not exceed more than 10% of the length of pole for the given
load“? Pole should be generally made as per the dimensional
data, performance criteria and some interchangeability
features of poles as per standard ANSI C 136.20 latest version
or ASTM D 4923/01 . The size of pole and type of installation
(1) Suitable for base plate mounting single arm Bracket.
[H] Overall length of 6 Mtr. Average Thickness: 7.5mm Top/
Bottom OD Dia A/F 89mm ± 2mm approx. approx. Weight of
Pole 32 kg approx. (Without Base) Anchor Base (Size 300X300
Providing FRP arm bracket of having 2 sets of suitable SS304
hardware for fixing the brackets & spread of 1.2 Mtr(Suitable
13 for 89 to 114 mm pole top dia)
(a) Single arm bracket 26.00 Ea. 2551.26
Providing M-20 / 1:2:4 cement concrete foundation & 70 %
PCC from bottom including excavation for the pole of size 45 x
45 x 100 cms. Deep in below ground level with plinth of
cms x 45 cms (or 45 cms dia x 45 cms) high upper ground
level with necessary curing and finishing in approved manner.
( for 4 & 6 mtr pole) 26.00 Ea. 809.01
Supplying & erecting MINI SECTION PILLAR 75 x 60 x 45 cms
fabricated from 16 Gauge thick joint legs M.S. Sheet with angle
iron legs 45 cms long made from 35 x 35 x 5 mm thick.
Jointless M.S. Angle with cable clamps to be buried in ground
to have appropriate erection to work Uniform Until erected with
cement concrete foundation and 45 cms high bricks work
finishing with plaster etc. hinged double door with 3" x 4"
vision panel covered with Mesh & V. panel overlapping with flap
for meter reading internally supported on both side, with
15 internal and outside looking arrangement with look and keys in
duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is
welded and other with nut and bolt for erecting bakelite sheet.
Painting the Section Pillar inside and out side with three tank
powder coated paint.. Section pillar roof should be without joint
with water leakage proof & tested as per IP 55 test & followed
(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge
MS Sheet with angle iron legs 45 cm long made from 35 X 35 X
5 mm thick MS angle. 1.00 Ea. 3595.60
Supplying and erecting bakelite sheet 12mm thick HYLAM
16 make on existing angle iron frame. 2.00 sq.mtr. 2311.89
Supplying & erecting approved make time switch with single
pole airbreak contacts suitable for 230 V.15/16A.complete with
self starting motor driven clock ‘ON’ &’ OFF’ automatic
arrangement at any predetermined time during each
hours,With nickel cadmium rechargeable battery backup
erected as directed. 1.00 Ea. 2354.31
Supplying & erecting power contactor for time switch complete
erected as per direction Cat III [D] 4 Pole 440 V 40 Amps. 1.00 Ea. 2782.55
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount
mentioned above.
Tendered amount put to tender Rs.2,04,62,378.00 Tendered amount put to tender Rs.2,04,62,378.00
Deduct. % below Rs. Add.: % Above Rs.
President, Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
TALALA NAGARPALIKA - TALALA
ESTIMATE FOR ELECTRIC WORK FOR PROPOSE NATUROPATHY CENTER AT TALALA DIST.
GIR SOMNATH UNDER SJMMSVY SCHEME 2025-26
Description Qty Unit Rate Amount
1 Point wiring for Looped Plug with 6A Modular type
switch & 5 pin socket erected on PVC / Metallic
box, single mounting base frame covered with
textured / metallic front plate modules erected on
/ in wall / ceiling with following type accessories
Cat. II 80.00 Point 236.34
2 Point wiring for Light / Bell with 2-1.5 sq.mm &
earthwire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated
multistrand copper wires, in following type of pipe
to be erected concealed in/ on surface on
wall/ceiling complete with 6A Modular type switch
/ bell push & accessories and earth continuity of
following type, erected on PVC / Metallic box,
single mounting base frame covered with
textured/metallic front plate modules erected on /
in wall / ceiling as per pipe erected, with
necessary Lamp holder/ceiling rose /
H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling
Cat. II 47.00 Point 465.61
3 Point wiring for FAN with 2-1.5 sq.mm &
earthwire of 1.5 sq.mm (Green) both are of .ISI
marked 1.1 KV Grade FRLS PVC insulated
multistrand copper wires, in following type of pipe
to be erected concealed in / flushed on wall/ceiling
complete with 6A Modular type switch and hum
free EME four or more step type electronic fan
regulator(2M) with separately mounted and
accessories with earth continuity of following type
erected on PVC / Metallic box, single mounting
base frame covered with textured/metallic front
plate modules erected on / in wall / ceiling as per
pipe erected. with necessary ceiling rose / H.D.
Connector as directed.(f) with medium class Rigid
PVC pipe and accessories erected concealed in
wall/ceiling completeCat. II 16.00 Point 654.48
4 Point wiring for Individual Plug with & earthwire
of 1.5 sq.mm (Green) both are of ISI marked
KV grade FRLS PVC insulated multistrand copper
wires, in following type of to be erected concealed
in / on surface of wall / ceiling complete with
Modular type switch & 5 pin Plug erected on PVC /
Metallic box covered with appropriate front plate
modules erected on / in wall / ceiling as per pipe
erected with following type of accessories.
[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire
(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling 8.00 Point 493.89
complete Cat. II
5 Providing following type of Modular Type
Accessories mounted with pvc / metallic/Wooden
box, single mounting base frame covered with
textured / metallic front plate , modules erected
with necessary connection. As desired by Engineer
In charge(7) Blank Plate Single Cat.III 36.00 Each 236.34
6 Supplying and erecting LED indoor fittings with
LEDs of wattage 0.2 Watt to 0.5 Watt assembled
on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming
to IS: 513/CRCA powder coated and high U.V. &
corrosion resistance with diffuser and/or
Polycarbonate optics with company mark/name
120 to 300 V,Power Factor more than 0.9, THD <
10 %, CCT 4000 K to 6500K, Uniformity ratio
>0.7, Luminaireefficacy> 100 lumens/watt, LED
driver efficiency > 85 % CREE / OSRAM / PHILIPS
Lumileds / NICHIA / SEOUL/ Bridgelux(U.S.A.)
make LED used for luminaire. ( fitting required
LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges
(A) Tube Light with integral driver
(i) 5-10 Watts, Surge-2 KV, IP-20, conventional
to 2 feet 34.00 Each 165.64
7 Supplying and erecting LED indoor fittings with
LEDs of wattage 0.2 Watt to 0.5 Watt assembled
on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming
to IS: 513/CRCA powder coated and high U.V. &
corrosion resistance with diffuser and/or
Polycarbonate optics with company mark/name
120 to 300 V,Power Factor more than 0.9, THD <
10 %, CCT 4000 K to 6500K, Uniformity ratio
>0.7, Luminaireefficacy> 100 lumens/watt, LED
driver efficiency > 85 % CREE / OSRAM / PHILIPS
Lumileds / NICHIA / SEOUL / Bridgelux(U.S.A.)
make LED used for luminaire. ( fitting required
LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges
shown.)(A )Square/ Circular Surface/Recessed
Mounted Downlight with provision for spring
loaded mounting clips complete.(A ) 22-24 watts,
Surge-2 KVCat.III 50.00 Each 758.51
8 Providing and erecting Sheet Steel powder coated
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, confirming to IS 13032 and BS 5486-1986
without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company
of MCB to be used)
(E) Single phase 8 way single door 10.00 Each 702.96
9 Miniature circuit breaker single pole 6A to 32A
suitable to operate on 240 V A.C. system and
having breaking capacity 10 KA to be erected in
existing box. confirming to IS 8828/1996 with ISI
Mark Cat II 8.00 Each 91.91
10 Supplying & erecting approved make low noise
decorative exhaust fan having size 200mm with
1350 RPM with square frame ABS body with inbuilt
lowers & square frame. 8.00 Each 1703.87
11 providing and erecting Approved make RCCBs
conforming to IS: 12640 and having sensitivity of
30 mA and Short Circuit withstand capacity of
KA and suitable for operation on single phase
V,50Hz. having characteristic of quick action &
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed (i)
Amps.DP CAT-ll 10.00 Each 1627.11
12 Providing and erecting ISI mark Medium class
RIGID PVC PIPES of following size complete to
be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed with
adhesive solution & Clamps with following dia of
pipes, in approved manner as directed
13 Providing and erecting ISI mark Medium class
RIGID PVC PIPES of following size complete to
be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed with
adhesive solution & Clamps with following dia of
pipes, in approved manner as directed
14 Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free G.I.Pipes having
Outer pipe dia of 50mm having 80-200 Micron
galvanising, Inner pipe dia of 25 mm having 200-
250 Micron galvanising, connection terminal dia of
12mm with constant ohmic value surrounded by
highly conductive compound with high charge
dissipation suitable for following type of
applications.(b)For Electrical installation up to
KV in normal soil.Length of Pipe : 2.00 mtrsBack
filling Compound :1 no. Bag of 25 Kg. 3.00 Each 5760.03
15 Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free G.I.Pipes having
Outer pipe dia of 50mm having 80-200 Micron
galvanising, Inner pipe dia of 25 mm having 200-
250 Micron galvanising, connection terminal dia of
12mm with constant ohmic value surrounded by
highly conductive compound with high charge
dissipation suitable for following type of
Providing and erecting HOT deep Galvanised iron 10.00 Kg. 77.77
strip wire 8 to 16 SWG.
16 Point wiring for Two Way Controlled Light Point
with 2-1.5 sq.mm & earthwire of 1.5 sq.mm
(green) both are of .ISI marked 1.1 KV grade
FRLS PVC insulated multistrand copper wires, in
following type of pipe to be erected concealed in /
flushed on wall/ceiling ,complete with 6A Modular
type switches and following type of accessories
erected on PVC / Metallic box, single mounting
base frame covered with textured / metallic front
plate modules erected on / in wall / ceiling as per
pipe erected. with necessary batten/angle holder
or ceiling rose or H.D.Connector as directed.(f)
with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling completeCat. III 2.00 Point 581.76
17 Providing following type of Modular Type
Accessories mounted with pvc / metallic box,
single mounting base frame covered with textured
/ metallic front plate , modules erected with
necessary connection. As desired by Engineer In
charge(4) TV Co-axial Socket outlet ,Cat.II 1.00 Each 140.39
18 Supplying & erecting approved make LAN cable of
following size in existing pipe as per direction,[C]
19 Providing & erecting Approved make Power Saving
50 Watt Ceiling Fan with double ball bearing ISI
mark with Condenser 230 volt A.C. 50 Hz
mm sweep complete having 3blades with
aluminium blades with , canopy & 30 cms. down
rod erected with 24/ 0.2, 3 core flexible wire with
earthing.(Make shall be approved by Engineer in
charge)) 16.00 Each 1948.29
20 Supplying and erecting 19 / 20 mm. nominal bore
Medium Class M.S. Pipe down rod erected duly
painted for fan complete with proper insulation
without leckage and earthing. 16.00 Mtr. 108.07
21 Supplying & erecting fan hook box of 10 mm
M.S. round bar bounded to the RCC bars up to
50mm length each side and pierced through a
Gauge M.S. box / Heavy Duty PVC box complete
erected concealed in Ceiling with necessary
finishing. 16.00 Each 108.07
22 Providing 2.5mm.thick laminated acrylic sheet to
cover the fan hook or Fan box 16.00 Each 18.18
23 Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in
following type of pipe to be erected concealed in
/flushed on wall/ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following size
(a) with medium class Rigid PVC pipe and
accessories (a) 2 wire 1.5 sq. mm 30.00 Mtr. 62.62
24 Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in
following type of pipe to be erected concealed in
/flushed on wall/ceiling, with 1.5 sq. mm copper 30.00 Mtr. 82.82
conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following
size(a) with medium class Rigid PVC pipe and
accessories (b) 2 wire 2.5 sq. mm
25 Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in
following type of pipe to be erected in / on wall /
ceiling with 2.5 sq. mm copper conductor FRLS
PVC insulated stranded wire of green colour for
earth continuity of following size
(a) with medium class Rigid PVC pipe and
accessories (a) 2 wire 4 sq. mm 140.00 Mtr. 112.11
26 Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in
following type of pipe to be erected in / on wall /
ceiling with 2.5 sq. mm copper conductor FRLS
PVC insulated stranded wire of green colour for
earth continuity of following size
(a) with medium class Rigid PVC pipe and
accessories (h) 4 wire 6 sq. mm 30.00 Mtr. 260.58
27 Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 protection &
above as per requirement made from 14 SWG
thick CRC M.S. sheet for outer body & doors,
SWG thick CRC M.S.sheet for internal partitions
with necessary supporting angles, flats including
cutting, bending, drilling, welding, riveting with
internal partitions & cable alley as per
requirements & instruction of engineer-in-charge
with erection of supplied switch gears, BUSBARS,
with suitable size of inter connecting PVC copper
wire / copper-aluminium strips, rubber grommets,
rib, bakelite control fuses for measuring
instruments, earth bus & earth bolts, foundation
flange - bolts-base Plates, sufficient nos. of hinged
doors, handles with locking arrangement and
rubber gasket,heavy duty end terminal connection
complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base
beams) The panel shall be supplied with following
approved manufacturers with following size. (A)
The standard companies switch gear shall be used
and only manufacturers at CPRI approved factory Sq
for beneficial use. (i) with 350mm depth 2.00 Mtr. 10468.65
28 Providing and erecting water cooler having storage
capacity 80Ltr. & cooling capacity 40 Ltr.per hour
@ an ambient temp of 450 C. The outlet temp. of
the water should drop by 150 C within a hour, The
water cooler should be comprising of hermetically
sealed compressor, fan motor, condensing unit,
water tank surrounded by evaporating coil,
thermostats, relay etc. complete with necessary
inlet & outlet connection. The body of water cooler 1.00 Each 49559.69
will be made from Stainless Steel.
29 Supplying & erecting 5 stage single reverse
osmosis water purification system with M.S.
powder coated frame, prefilter housing with 'O'
ring presediment filter GAC filter, carbon filter
suitable buster DC pump capacity 80 psi, mention
with 40 Osg inline type post carbon filter auto low
& high pressure switches with following size of
storage tank & LPH capacity & erected as directed
with one year comprehensive maintenance
guarantee.[B] 25 Ltr / Hr with 30 Ltr. S.S.
Pressure Tank 1.00 Each 15620.66
30 Providing and erecting approved make split air-
conditioning unit consisting of copper condensing
unit with fan motor, hermetically sealed rotary
compressor with accessories etc. duly connected
separately erected evaporating unit and blower
motor with its accessories by means of extra
supplied proper insulated copper tubing,drain PVC
pipes suitable for ( cost includes powder coated
Stand, Eco Friendly green gas charging, 15A plug
top & Remote Control) with necessary core
(A) For 3 star Rating (1)For ISEER Range
(KWH/KWH)(3.1 to 3.99)
(b) For 1.5 TR A.C. Machine 8.00 Each 36819.55
31 Supplying & erecting approved make self-priming
domestic monoblock water pump with 1 H.P
motor, suitable for operation on 230 volts, 50c/s.
AC supply with metallic flange, and M.S. impeller
delivery and following discharge
(a) 40 LPM at 24 mtrs. head suitable for 25mm
dia. Delivery Cat. III 1.00 Each 7679.03
32 Providing and erecting ISI marked PVC insulated
PVC Sheathed Flat flexible Submersible copper
cable approved make of following Size. (B) 3 Core
33 Supplying & erecting ISI Marked (Embossed)
following size of “B” Class G.I . Pipe & erecting as
directed by Engineer-in-charge with necessary
plumbing as desired. (A) 25 mm dia 1.00 Mtr. 130.29
34 Supplying & erecting G.l. bend for pipe
connections suitable for (A) 25 mm (1") 1.00 No 64.64
35 Supplying & erecting ISI Marked G.l. Elbow for
pipe connections suitable for (A) 25 mm (1") 1.00 No 44.44
36 Supplying & Installation of Sony Bravia 80 cm (32
inches) HD Ready Smart Android LED TV KD-
32W820 (Black) (2021 Model) | with Alexa
Compatibility with all accessories including all cost
of material, labour, transportation, loading and
unloading etc complete. 1.00 Each 25250.00
37 Supplying and Installation of Prama/CP
Plus/Hikvision 16 CH HDTVI 265+ 2MP Support
DVR as per direction by engineer in charge. 1.00 No 15352.00
38 Supplying of Prama/CP Plus/Hikvision 2 MP
HDTVI OUTDOOR WDR BULLET CAMERA as per 10.00 No 4848.00
direction by engineer in charge.
39 Supplying and Installation of Seagate 2TB AVGP
HDD as per direction by engineer in charge. 1.00 No 7575.00
40 Supplying and Installation of ERD 16CH CAMERA
SMPS as per direction by engineer in charge. 1.00 No 3232.00
41 Supply and Installation of 4x4 camera gain box as
per direction by engineer in charge. 10.00 No 303.00
42 Supply and Installation of 4U rack for DVR as per
direction by engineer in charge. 1.00 No 7575.00
43 Installation of Camera as per direction by engineer
in charge. 10.00 No 505.00
44 Providing And Supplying 3+1 CCTV Camera cable
As per Direction of Engineer in charge 500.00 Rmt 30.30
45 Providing and Fixing 15.34KW solar Roof top
power plant with all taxes and necessary fixtures
like Solar Panel, Mounting Structure, Invertrer (on
grid) cable DC, Cable AC, Lighting Arresteor,
Earthing Kit, Swithgear, Polycarbonate Box etc
complete. (including Geda registration fees and
meter charge) 1.00 Each 643565.94
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount
mentioned above.
Tendered amount put to tender Rs.2,04,62,378.00 Tendered amount put to tender Rs.2,04,62,378.00
Deduct. % below Rs. Add.: % Above Rs.
President, Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
TALALA NAGARPALIKA - TALALA
ESTIMATE FOR ELECTRICAL WORK OF PROPOSE YOGA HALL AT TALALA DIST- GIR-
Description Qty Unit Rate Amount
1 Point wiring for Looped Plug with 6A Modular type
switch & 5 pin socket erected on PVC / Metallic
box, single mounting base frame covered with
textured / metallic front plate modules erected on
/ in wall / ceiling with following type accessories
Cat. II 44.00 Point 236.34
2 Point wiring for Light / Bell with 2-1.5 sq.mm &
earthwire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated
multistrand copper wires, in following type of pipe
to be erected concealed in/ on surface on
wall/ceiling complete with 6A Modular type switch
/ bell push & accessories and earth continuity of
following type, erected on PVC / Metallic box,
single mounting base frame covered with
textured/metallic front plate modules erected on /
in wall / ceiling as per pipe erected, with
necessary Lamp holder/ceiling rose / H.D.
Connector as directed.
(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling
Cat. II 34.00 Point 465.61
3 Point wiring for FAN with 2-1.5 sq.mm &
earthwire of 1.5 sq.mm (Green) both are of .ISI
marked 1.1 KV Grade FRLS PVC insulated
multistrand copper wires, in following type of pipe
to be erected concealed in / flushed on wall/ceiling
complete with 6A Modular type switch and hum
free EME four or more step type electronic fan
regulator(2M) with separately mounted and
accessories with earth continuity of following type
erected on PVC / Metallic box, single mounting
base frame covered with textured/metallic front
plate modules erected on / in wall / ceiling as per
pipe erected. with necessary ceiling rose /
H.D.Connector as directed.(f) with medium class
Rigid PVC pipe and accessories erected concealed
in wall/ceiling ompleteCat. II 18.00 Point 654.48
4 Point wiring for Individual Plug with & earthwire
of 1.5 sq.mm (Green) both are of ISI marked
KV grade FRLS PVC insulated multistrand copper
wires, in following type of to be erected concealed
in / on surface of wall / ceiling complete with
Modular type switch & 5 pin Plug erected on PVC /
Metallic box covered with appropriate front plate
modules erected on / in wall / ceiling as per pipe
erected with following type of accessories.
[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire
(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling 5.00 Point 493.89
5 Providing following type of Modular Type
Accessories mounted with pvc / metallic/Wooden
box, single mounting base frame covered with
textured / metallic front plate , modules erected
with necessary connection. As desired by Engineer
In charge(7) Blank Plate Single Cat.III 24.00 Each 236.34
6 Supplying and erecting LED indoor fittings with
LEDs of wattage 0.2 Watt to 0.5 Watt assembled
on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming
to IS: 513/CRCA powder coated and high U.V. &
corrosion resistance with diffuser and/or
Polycarbonate optics with company mark/name
120 to 300 V,Power Factor more than 0.9, THD <
10 %, CCT 4000 K to 6500K, Uniformity ratio
>0.7, Luminaireefficacy> 100 lumens/watt, LED
driver efficiency > 85 % CREE / OSRAM / PHILIPS
Lumileds / NICHIA / SEOUL/ Bridgelux (U.S.A.)
make LED used for luminaire. ( fitting required
LM-79 & LM-80 Certificates) (NOTE: Below
description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges
(A) Tube Light with integral driver
(i) 5-10 Watts, Surge-2 KV, IP-20, conventional
to 2 feet 26.00 Each 165.64
7 Supplying and erecting LED indoor fittings with
LEDs of wattage 0.2 Watt to 0.5 Watt assembled
on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming
to IS: 513/CRCA powder coated and high U.V. &
corrosion resistance with diffuser and/or
Polycarbonate optics with company mark/name
120 to 300 V,Power Factor more than 0.9, THD <
10 %, CCT 4000 K to 6500K, Uniformity ratio
>0.7, Luminaireefficacy> 100 lumens/watt , LED
driver efficiency > 85 % CREE / OSRAM / PHILIPS
Lumileds / NICHIA / SEOUL/ Bridgelux (U.S.A.)
make LED used for luminaire. ( fitting required
LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges
shown.)(A )Square/ Circular Surface/Recessed
Mounted Downlight with provision for spring
loaded mounting clips complete.(A ) 22-24 watts,
Surge-2 KVCat.III 38.00 Each 758.51
8 Providing and erecting Sheet Steel powder coated
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, confirming to IS 13032 and BS 5486-1986
without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company
of MCB to be used) 4.00 Each 702.96
(E) Single phase 8 way single door
9 Miniature circuit breaker single pole 6A to 32A
suitable to operate on 240 V A.C. system and
having breaking capacity 10 KA to be erected in
existing box. confirming to IS 8828/1996 with ISI
Cat II 5.00 Each 91.91
10 Supplying & erecting approved make low noise
decorative exhaust fan having size 200mm with
1350 RPM with square frame ABS body with inbuilt
lowers & square frame. 6.00 Each 1703.87
11 providing and erecting Approved make RCCBs
conforming to IS: 12640 and having sensitivity of
30 mA and Short Circuit withstand capacity of
KA and suitable for operation on single phase
V,50Hz. having characteristic of quick action &
tripping with all advance feature & do not
incorporate any electronic component. for
following Max. rating erected as directed
(i) 25 Amps.DP CAT-ll 4.00 Each 1627.11
12 Providing and erecting ISI mark Medium class
RIGID PVC PIPES of following size complete to
be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed with
adhesive solution & Clamps with following dia of
pipes, in approved manner as directed
13 Providing and erecting ISI mark Medium class
RIGID PVC PIPES of following size complete to
be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed with
adhesive solution & Clamps with following dia of
pipes, in approved manner as directed
14 Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free G.I.Pipes having
Outer pipe dia of 50mm having 80-200 Micron
galvanising, Inner pipe dia of 25 mm having 200-
250 Micron galvanising, connection terminal dia of
12mm with constant ohmic value surrounded by
highly conductive compound with high charge
dissipation suitable for following type of
applications.(b)For Electrical installation up to
KV in normal soil.Length of Pipe : 2.00 mtrsBack
filling Compound :1 no. Bag of 25 Kg. 3.00 Each 5760.03
15 Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free G.I.Pipes having
Outer pipe dia of 50mm having 80-200 Micron
galvanising, Inner pipe dia of 25 mm having 200-
250 Micron galvanising, connection terminal dia of
12mm with constant ohmic value surrounded by
highly conductive compound with high charge
dissipation suitable for following type of 10.00 Kg. 77.77
Providing and erecting HOT deep Galvanised iron
strip wire 8 to 16 SWG.
16 Point wiring for Two Way Controlled Light Point
with 2-1.5 sq.mm & earthwire of 1.5 sq.mm
(green) both are of .ISI marked 1.1 KV grade
FRLS PVC insulated multistrand copper wires, in
following type of pipe to be erected concealed in /
flushed on wall/ceiling ,complete with 6A Modular
type switches and following type of accessories
erected on PVC / Metallic box, single mounting
base frame covered with textured / metallic front
plate modules erected on / in wall / ceiling as per
pipe erected. with necessary batten/angle holder
or ceiling rose or H.D.Connector as directed.(f)
with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling completeCat. III 2.00 Point 581.76
17 Providing following type of Modular Type
Accessories mounted with pvc / metallic box,
single mounting base frame covered with textured
/ metallic front plate , modules erected with
necessary connection. As desired by Engineer In
charge(4) TV Co-axial Socket outlet ,Cat.II 1.00 Each 140.39
18 Supplying & erecting approved make LAN cable of
following size in existing pipe as per direction,[C]
19 Providing & erecting Approved make Power Saving
50 Watt Ceiling Fan with double ball bearing ISI
mark with Condenser 230 volt A.C. 50 Hz
mm sweep complete having 3blades with
aluminium blades with , canopy & 30 cms. down
rod erected with 24/ 0.2, 3 core flexible wire with
earthing.(Make shall be approved by Engineer in
charge)) 18.00 Each 1948.29
20 Supplying and erecting 19 / 20 mm. nominal bore
Medium Class M.S. Pipe down rod erected duly
painted for fan complete with proper insulation
without leckage and earthing. 18.00 Mtr. 108.07
21 Supplying & erecting fan hook box of 10 mm
M.S. round bar bounded to the RCC bars up to
50mm length each side and pierced through a
Gauge M.S. box / Heavy Duty PVC box complete
erected concealed in Ceiling with necessary
finishing. 18.00 Each 108.07
22 Providing 2.5mm.thick laminated acrylic sheet to
cover the fan hook or Fan box 18.00 Each 18.18
23 Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in
following type of pipe to be erected concealed in
/flushed on wall/ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following size
(a) with medium class Rigid PVC pipe and
(a) 2 wire 1.5 sq. mm 40.00 Mtr. 62.62
24 Mains with 1.1 KV grade FRLS PVC insulated ISI 40.00 Mtr. 82.82
marked stranded Copper conductor wire in
following type of pipe to be erected concealed in
/flushed on wall/ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following
size(a) with medium class Rigid PVC pipe and
accessories (b) 2 wire 2.5 sq. mm
25 Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in
following type of pipe to be erected in / on wall /
ceiling with 2.5 sq. mm copper conductor FRLS
PVC insulated stranded wire of green colour for
earth continuity of following size
(a) with medium class Rigid PVC pipe and
accessories (a) 2 wire 4 sq. mm 140.00 Mtr. 112.11
26 Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in
following type of pipe to be erected in / on wall /
ceiling with 2.5 sq. mm copper conductor FRLS
PVC insulated stranded wire of green colour for
earth continuity of following size
(a) with medium class Rigid PVC pipe and
accessories (h) 4 wire 6 sq. mm 35.00 Mtr. 260.58
27 Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type
cubical panel board necessary IP-42 protection &
above as per requirement made from 14 SWG
thick CRC M.S. sheet for outer body & doors,
SWG thick CRC M.S.sheet for internal partitions
with necessary supporting angles, flats including
cutting, bending, drilling, welding, riveting with
internal partitions & cable alley as per
requirements & instruction of engineer-in-charge
with erection of supplied switch gears, BUSBARS,
with suitable size of inter connecting PVC copper
wire / copper-aluminium strips, rubber grommets,
rib, bakelite control fuses for measuring
instruments, earth bus & earth bolts, foundation
flange - bolts-base Plates, sufficient nos. of hinged
doors, handles with locking arrangement and
rubber gasket,heavy duty end terminal connection
complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base
beams) The panel shall be supplied with following
approved manufacturers with following size. (A)
The standard companies switch gear shall be used
and only manufacturers at CPRI approved factory Sq
for beneficial use. (i) with 350mm depth 2.00 Mtr. 10468.65
28 Providing and erecting water cooler having storage
capacity 80Ltr. & cooling capacity 40 Ltr.per hour
@ an ambient temp of 450 C. The outlet temp. of
the water should drop by 150 C within a hour, The
water cooler should be comprising of hermetically
sealed compressor, fan motor, condensing unit, 1.00 Each 49559.69
water tank surrounded by evaporating coil,
thermostats, relay etc. complete with necessary
inlet & outlet connection. The body of water cooler
will be made from Stainless Steel.
29 Supplying & erecting 5 stage single reverse
osmosis water purification system with M.S.
powder coated frame, prefilter housing with 'O'
ring presediment filter GAC filter, carbon filter
suitable buster DC pump capacity 80 psi, mention
with 40 Osg inline type post carbon filter auto low
& high pressure switches with following size of
storage tank & LPH capacity & erected as directed
with one year comprehensive maintenance
guarantee.[B] 25 Ltr / Hr with 30 Ltr. S.S.
Pressure Tank 1.00 Each 15620.66
30 Providing and erecting approved make split air-
conditioning unit consisting of copper condensing
unit with fan motor, hermetically sealed rotary
compressor with accessories etc. duly connected
separately erected evaporating unit and blower
motor with its accessories by means of extra
supplied proper insulated copper tubing,drain PVC
pipes suitable for ( cost includes powder coated
Stand, Eco Friendly green gas charging, 15A plug
top & Remote Control) with necessary core
cutting. (A) For 3 star Rating (1)For ISEER Range
(KWH/KWH)(3.1 to 3.99) (b) For 1.5 TR A.C.
Machine 5.00 Each 36819.55
31 Supplying & erecting approved make self-priming
domestic monoblock water pump with 1 H.P
motor, suitable for operation on 230 volts, 50c/s.
AC supply with metallic flange, and M.S. impeller
delivery and following discharge (a) 40 LPM at
mtrs. head suitable for 25mm dia. Delivery Cat.
III 1.00 Each 7679.03
32 Providing and erecting ISI marked PVC insulated
PVC Sheathed Flat flexible Submersible copper
cable approved make of following Size.
(B) 3 Core x 2.5 Sq. mm. 50.00 Mtr. 104.03
33 Supplying & erecting ISI Marked (Embossed)
following size of “B” Class G.I . Pipe & erecting as
directed by Engineer-in-charge with necessary
plumbing as desired. (A) 25 mm dia 1.00 Mtr. 130.29
34 Supplying & erecting G.l. bend for pipe
connections suitable for (A) 25 mm (1") 1.00 No 64.64
35 Supplying & erecting ISI Marked G.l. Elbow for
pipe connections suitable for (A) 25 mm (1") 1.00 No 44.44
36 Supplying and Installation of Prama/CP
Plus/Hikvision 16 CH HDTVI 265+ 2MP Support
DVR as per direction by engineer incharge. 1.00 No 15352.00
37 Supplying of Prama/CP Plus/Hikvision 2 MP
HDTVI OUTDOOR WDR BULLET CAMERA as per
direction by engineer in charge. 10.00 No 4848.00
38 Supplying and Installation of Seagate 2TB AVGP
HDD as per direction by engineer in charge. 1.00 No 7575.00
39 Supplying and Installation of ERD 16CH CAMERA 1.00 No 3232.00
SMPS as per direction by engineer in charge.
40 Supply and Installation of 4x4 camera gain box as
per direction by engineer in charge. 10.00 No 303.00
41 Supply and Installation of 4U rack for DVR as per
direction by engineer in charge. 1.00 No 7575.00
42 Installation of Camera as per direction by engineer
in charge. 10.00 No 505.00
43 Providing And Supplying 3+1 CCTV Camera Cable
As per Direction of Engineer in charge 500.00 Rmt 30.30
44 Providing and Fixing 15.34 KW solar Roof top
power plant with all taxes and necessary fixtures
like Solar Panel, Mounting Structure, Invertrer (on
grid) cable DC, Cable AC, Lighting Arresteor,
Earthing Kit, Swithgear, Polycarbonate Box etc
complete. (including Geda registration fees and
meter charge) 1.00 Each 643565.94
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount
mentioned above.
Tendered amount put to tender Rs.2,04,62,378.00 Tendered amount put to tender Rs.2,04,62,378.00
Deduct. % below Rs. Add.: % Above Rs.
President, Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
TALALA NAGARPALIKA - TALALA
CONSTRUCTION OF PROPOSE COMMAN GARDEN AT TALALA DIST. GIR SOMNATH UNDER
SJMMSVY SCHEME 2025-26
Description Qty Unit Rate Amount
1 Providing and fixing of ABC Types Store Pressure Fire
Extinguisher Having capacity 6 KG Filled With Mono
Ammonium Phosphate Power 50% confims to IS
Store Pressure Types, UGTS Pressure Gauge, Can Height
530mm, Diameter 150± 10mm, Discharge Time 24 Sec,
Controllable discharge mechinsm, jet Range 5 Meter,
Average Discharge is 92%,applicable on class A,B & C and
electrially started Fire, Fire Rating 4A:144B, Can
Construction : Deep drawn & CO2 Mig welded, EPDM
(Ethylene Proylene Diene Monomer)Rubber Hose with both
end Aluminum clamped, Inernal Coating - Epoxy Powder
coating, External Coating - Pure Polyester Powder Coating
(UV Resistant), Brass forged CE Marked Valves with NRV &
Auto Safety Release with Safety Pin is of SS Material Made
Up Referance weight:- Gross Weight 8.9 Kg, Empty Weight
1) Necessary certificate and gurantee must be attched
2) OEM has to provide wall munting heavy duty
bracket\clamp, screw, hardware for installation.
3) Following printed marking Manufacturing Date & Expiry
Date must be mention on extiguisher.
4) Refilling period Must be of 3 Years. Following Printed
marking on equiment must be required:- Model No,
Capacity, Gross weight, Content, Fire rating, Batch No.
Serial No., MFG Month, Refilling Due.[With Necessary
numbering /marking with oil paint by painter as
instructions given by G.S.P.H.C.L. engineer] (Make :-
KANEX, MINIMAX, CEASEFIRE ) 18.00 Nos 2999.70
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount
mentioned above.
Tendered amount put to tender Rs.2,04,62,378.00 Tendered amount put to tender Rs.2,04,62,378.00
Deduct. % below Rs. Add.: % Above Rs.
President, Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01-Talala Naturopathy and Yoga Center.pdf
02 GR All.pdf
03 Naturopathy and Yoga SCHEDULE B.pdf
04. CIVIL General Technical Specification.pdf
05. Item Wise Specification..pdf
06 drawing.pdf
07. SITE VISIT CERTIFICATE.pdf
Download all tender documents and submit your bid