Survey, investigation, design, supply, erection, testing and commissioning for providing irrigation facilities to Pamanakallur and other Villages in Maski taluk of Raichur district from Distributary 5A of Narayanpura Right bank canal including Operation and Maintenance for Five years from successful commissioning of the entire system on Turn-key Basis.

The intending bidder should have in last 5 years i.e. from 2020-21 to 2024-25, satisfactorily completed (not less than 90% of contract value) as a prime contractor, one similar work costing not less than Rs. 408.11 Crore in last five years reckoned back from 2025-26 (Up to last date of submission of bid). The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned Division and counter signed by the Superintending Engineer of the same circle or equivalent in case of other Government undertaking within India. The cost will be updated to the present value by giving a weightage of 10% for each year, if the work is completed prior to FY 2025-26. Note-: 1) Similar work comprises of Survey, Investigation, Design, Supply and construction of Lift Irrigation Scheme / Water Supply Scheme / Potential oriented irrigation work of value not less than Rs. 408.11 Crore.

The intending bidder should have laid and tested minimum quantity of MS Rising Pressure pipe/Gravity pipe system of the work with following diameter of pipes in any one financial year, during the last five financial years reckoned back from 2025-26. Certificate should be obtained from an officer not below the rank of Executive Engineer of the concerned Division and countersigned by the SE of the concerned Circle or equivalent in case of other Govt. undertaking within India. A) MS Rising Pressure pipe/Gravity pipe with Inner diameter 350 mm and above for length 41.74 Km for MS Rising Main /Gravity distribution system. (Usually, 80% of the peak annual rate of construction / tender period). B) HDPE/DI pipe with outer diameter 110 mm and above for length 331.43 Km for Pressure /Gravity distribution system. (Usually, 80% of the Peak annual rate of construction.

The intending bidder should have supplied, installed at least 2 Nos. of of VT Pumps and Motors of capacity not less than 1280 HP in any of the one financial years during the last 5 years (i.e., 2020-21 to 2024-25) and The certificate should be issued by an officer not below the rank of Executive Engineer of the concerned Division / Equivalent officer and countersigned by the SE of the concerned Circle / next higher officer or equivalent in case of other Government under taking.

The intending bidder should have executed / got executed through super grade CEIG registered electrical contractor 6 MVA Transformer and 110KV substation for power Transmission line work for a minimum length of 6.4 Km (80 % of the peak annual rate of construction) with 110KV Terminal Bay in any one financial year during the last 5 years (2020-21 to 2024-25). The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned Division and counter signed by the Superintending Engineer of the same circle or equivalent in case of other Government undertaking. Note:1) If the bidder has not executed the Transmission line work / Sub-station work, he should execute the work through super grade CEIG Registered electrical contractor who has Completed 6 MVA transformer, 110 KV Sub station. To this effect a Tie up agreement on stamp paper of Rs.1000/-. shall be furnished in the Technical bid.2)The successful bidder should furnish documents in support of the work done by CEIG registered electrical contractor at the time of concluding the agreement for the work. After getting approval from the Chief Engineer, the transmission line work shall be carried through the super grade CEIG Registered Electrical Contractor.

The intending bidder should have executed SCADA automation for water supply /irrigation project with remote monitoring and controlling of pipeline discharges with electrical actuator valves and electromagnetic flow meters, level sensors etc., for a 39 Number of outlet control nodes in the last 5 years i.e., from 2020-21 to 2024-25.Note:1) If the bidder does not have SCADA experience, then they shall furnish tie up agreement with SCADA agency. out lining term and condition. on stamp paper of Rs.1000/- 2)The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned Division and counter signed by the Superintending Engineer of the same circle or equivalent in case of other Government Undertaking.

The intending bidders should be a registered contractor enrolled in valid KPWD Class-I.

The Requisite Earnest Money Deposit (in the form of e-cash / e-Bank guarantee / Insurance Surety Bonds issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India).

Valid Employees Provident Fund Registration Certificate.

Valid GST Registration Certificate mandatory.

The intending bidder should have Own/lease Equipments and Machineries, shall be furnished as per the Finance Department (Govt) Circular No FD263/EXP/12/2022 dated 11-05-2022. 1.Excavator -4 Nos. Own, 4 Nos.Hire/Lease-Total 8 Nos. 2.Tipper -8 Nos.Own, 8 Nos Hire/Lease Total -16 Nos.3. Transit mixer-2 Nos. Own, 2 No. Hire/Lease-Total 4 Nos. 4.Vibratory Road Roller-1 Nos. Own, 1 No. Hire/Lease- Total 2 Nos. 5.Ultrasonic testing units-1 Nos. Own ,1 No. Hire/Lease- Total2 Nos.6.Radio graphic testing units-1 Nos. Own,1No. Hire/Lease-Total 2 Nos. 7.CRANE -Capacity 20 Tonnes above 1 Nos Own,1No.Hire/Lease -Total 2 Nos.

The intending bidder in his / its name should have in the last 5 years i.e., 2020-21 to 2024-25 achieved in at least 2 financial years, a minimum financial turnover of Rs. 816.22 Crore. The turnover prior to FY 2025-26 will be updated to the Present Price Level by giving weightage of 10% each year. Audited Profit and Loss account certified by a practicing Chartered Accountant bearing UDIN along with copy of Income Tax returns filed for the years indicated above should be furnished FY 2025-26.

Tenderers who meet the above specified minimum qualification criteria, will only be qualified, if their available tender capacity is more than the total tender value (Rs.816.22 Crore). The available tender Capacity will be calculated as below: Assessed available tender Capacity - (AxNx1.5 - B), where, A - Maximum value of civil engineering works Executed in any one year during the last five years (updated to 2025-26 price level) considering the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. B-Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 24 months (Period of completion of the works for which tenders are invited) Note:(i)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. For the Financial turnover of previous years a weight of 10% per year to bring them to the price level of (Year 2025-26).(ii)Even though the Tenderers meet the above criteria, they are subject to be disqualified if they have: a)made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and/or b)record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc., and/or c) participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification.

Bidder should furnish liquid assets and/or availability of credit facilities of not less than Rs.102.03 Crores from any Nationalized / scheduled bank (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.(usually the equivalent of the estimated cash flow for 3 months in the peak construction period) The format for Bankers Certificate/ Line of Credit (BC/LOC) letter to be issued by the Banks as per circular No: FD- CAM/16/2022 (P-2) dated:22.08.2022).

Tendering by a joint venture is permissible with two partners subject to the following conditions: a)Enrolment partner of the joint venture shall have been Registered Contractor enrolled in KPWD Class-I contractor. b)The joint venture shall be performed prior to the tendering and blank tender forms shall have been purchased by the joint venture itself. c) The lead partner shall have minimum 51% financial turnover criteria. d) All The JV Partners must have experience of general construction work. e) All The JV Partners should demonstrate that they have 25% financial turnover criteria.f) All The JV Partners should demonstrate that they have 25% minimum liquid assets.g) One of the partners of JV (lead partner) shall be duly authorized with a legally binding power of attorney to apply for tender forms and to sign the tender and to make further correspondences and deal with KBJNL on behalf of JV. h) A contractor is not eligible to participate as partner of more than one JV.i)In case of JV all the partners are jointly and severally responsible for successful performance of the contract.j) The lead partner shall enter in to a joint venture agreement on Rs.1000/- stamp paper in the prescribed format which shall be concluded prior to bidding and enclosed to the bid document and submit along with the request for bid document. k)The JV should open a separate bank account in the name of the JV in any nationalized bank, before signing the agreement to which all contract payment will be made by the employer.

The qualification criteria can be satisfied by individually or JV (adding collectively the credentials of all JV partners). All the partners should have achieved at least 25% of prescribed annual turnover (Qualification criteria), in any of the 2 financial years during the last 5 years (i.e., 2020-21 to 2024-25). Reports on the financial standing of the tenderer, such as profit and loss statements and auditor reports for the last five years The Financial Statement shall be certified by a practicing chartered accountant bearing UDI number generated on UDI portal of the Institute of Chartered Accountants of India, and the same shall be counter checked on the ICAI portal along with copy of income Tax returns filed for the years indicated above should be furnished.