PROVISION OF TEMPORARY ACCOMMODATION FOR FURNITURE FOR AGE I CG AT ICGS VISAKHAPATNAM

Amount

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Hard/ Dense soil complete all as specified and as directed.

Excavation in over areas not exceeding 1.5 M deep for foundation etc. and getting out in hard/dense soil complete all as specified complete all as specified and as directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete M-30 (using 20 mm graded granite stone aggregate) in foundations including rafts, footings and plinth beams mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete M30 (using 20 mm graded granite stone aggregate) in Columns, piers, posts and struts complete all as specified and as directed.

M&L for Reinforced Cement Concrete M30 (using 20 mm graded granite stone aggregate) in Beams, cantilevers, lintels over 1.5 M span complete all as specified and as directed.

M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and so fits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surface of concrete all as directed and as specified.

M & L for Formwork to sides of squar ,rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of conrete flat complete all as specified and as directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and as directed.

M & L for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M & L for Mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed

M & L for Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including mixing with WPC all as per manufacturers instructions complete all as specified and as directed. (Note :- WPC will be measured and paid separately)

M&L rendering 10 mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brickwork finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral liquid water proofing compound.

M & L for preparing newly plastered surfaces and applying two coats of exterior weather proof (100% acryllic paint) paint of approved make and shade over a coat of approved primer over a coat of 3 mm thickness wall care putty as recomended by the manufacturer on surface complete all as specified and as directed. MAKE: Asian / Shalimar / Berger / Dulax / Crimson / Jotun

M & L for preparing newly plastered surfaces of walls and applying two coats of acrylic oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

M&L for Mild steel angles , bars , flats, etc as in supports for stiffening of fencing , wall ties, hold fasts, clamps plain angle cleats for securing purlins, bolt and nuts and similar small articles confirming to Fe 410-O or Fe 310-O complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint.over one coat of red oxide complete all as specified and as directed.

S& F Pre-painted galvalume aluminum zinc coating trapizoidal profile sheet of 0.50 mm thick [TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. Make: M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH / M/s. Jindal

S & F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 with L-type or J-type or cranked hook bolts with roof sheeting in roofing complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils.

Removing excavated material (soils) exc 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 m above the starting point.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering including ramming complete all as specified and as directed.

M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for 75 mm thick Cement concrete type B-2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base flooring complete all as specified and as directed.

M & L for 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in flooring/ hard standing/sub base and finishing the concrete surface even and smooth without using extra cement.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Cutting holes in brick walls exc half brick but n. exc fullbrick wall in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

S&F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O or Fe 310-O complete all as specified and as directed.

S&F 30 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel complete all as specified and as directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 22 complete all as specified and as directed.

S & F in 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

M & L for Preparation of newly or previous untreated surfaces painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for Mild Steel Framed work such as grills, gratings, doors or Gates of angle or other section confirming to Fe 410 - S, including cast iron mouldings, ornamental designer pieces etc., with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

M & L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed.

M & L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured complete all as specified and as directed.

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M&L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth with using extra cement complete all as specified and as directed.

M&L for 100 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing complete all as specified and as directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658 - 2006 of , M-35 grade with grey cement and no pigment including 50 mm thick Sand filling as under floors or in foundations including watering as required.complete all as specified and as directed. Make : Ultra tiles Pvt. Ltd/Terra firma/Ecco Scope/ Mehtab tiles/ Bharat Tiles & Marble Pvt Ltd / National Tiles & Industries Pvt Ltd / Nitco Tiles Pvt Ltd / Nimco Tiles / Metro Tiles Bombay / Vitco Tiles Bombay / Anjali tiles

M&L chequered designed cement concrete tiles of size 300 mm x 300 mm x 20 mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor tiles complete all as specified and as directed.

VIJAY VINAYAKA INFRA

Ruchira Associates

sagar infra

SRI SIMHADRI COMPANY