Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical JAMMU AND KASHMIR JAMMU AND KASHMIR | JAMMU | JAMMU AND KASHMIR | 181122 | Accepted-Technical Firm has uploaded all documents as per tender documents. |
| 2 | Accepted-Technical | Accepted-Technical Firm has uploaded all documents as per tender documents. |
| 3 | Rejected-Technical | Rejected-Technical Firm has not uploaded all documents as per tender documents. |
Tender Value
₹10.7 L
EMD Value
₹21,353
Closing Date
1 Jun 2026, 4:30 pmClosed
Dy Commandant( Engineer), SHQ Ladakh, ITBP
Office of the Dy Inspector General, SHQ Ladakh, ITBP, Choglamsar (LeH)
Co Double Gate System at existing Gate and watch Tower at 47th Bn ITBP, Samba JK
2026_ITBP_907999_1
ITBP/SHQ(L)/Engr/Ten/2026-1499
Open Tender
Civil Works
Percentage
365 days
Samba Jammu
Please refer tender documents
12 documents required · 12 mandatory
₹0
₹21,353
SHQ Ladakh ITBP
10 Jun 2026
11 May 2026
2 Jun 2026
11 May 2026
1 Jun 2026
11 May 2026
11 May 2026 - 21 May 2026
21 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil. | 19.24 | Sqm | 129.85 | ₹2,498.31 |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil | 11.36 | Cum | 177.5 | ₹2,016.4 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | 8.18 | Cum | 196 | ₹1,603.28 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) | 1.88 | Cum | 6,518.6 | ₹12,254.97 |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 3.22 | Cum | 9,045.75 | ₹29,127.32 |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.68 | Cum | 10,852.95 | ₹29,085.91 |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | 6.43 | Cum | 11,505.5 | ₹73,980.36 |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.Mild steel and Medium Tensile steel bars | 436.15 | kg | 107.1 | ₹46,711.66 |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. | 1,169.78 | kg | 107.85 | ₹1,26,160.77 |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form fo Foundations, footings, bases of columns, etc. for mass concrete | 13.52 | Sqm | 392.15 | ₹5,301.87 |
stage.html
html • 0.02 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
BOQ_954337.xls
BOQ • 0.35 MB
Tenderform47bn_compressed.pdf
Tender Documents • 10.61 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .