Enquiry No I-13259/LTE/CONT/BT

Amount

PROVIDING AND FIXING OXIDISED M.S. TOWER BOLT (BARREL TYPE ) WITH NECESSARY SCREWS ETC. COMPLETE: 200* 10 MM.

15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)

Neat cement punning

PROVIDING AND FIXING OXIDISED M.S. HANDLES WITH NECESSARY SCREWS ETC. COMPLETE: 100MM.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm nomin

6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand)

RENEWING GLASS PANES, WITH WOODEN FILLETS WHEREVER NECESSARY: GLASS PANES WEIGHING 10 KG/SQM

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work.

Reinforcement cement concrete 1:2:4 mix (M-150) at all heights/depth and places with 20mm down graded stone chips complete with all labour and materials but excluding the cost of steel reinforcement and shuttering

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

Applying one coat of cement primer of approved brand and manufacture on wall surface :Cement primer.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all work up to plinth level 1:3:6 (1cement: 3coarse sand:6 graded stone aggregate 40mm nominal size).

Chipping & Removing plaster from old wall or floor surface at all heights and places, scraping and clean the surface and disposing off the debris within lead of 2 K.M.

Removing of old damaged tarfelt from the esisting roof buildings including cleaning the surface and transporting the debris within a lead of 1 km.

Dismantling or cutting openings in R.C.C. or other high grade concrete structures, and disposing off the debris as directed within a lead of 2 KM.

Dismantling all types of steel structures of building or supporting structures like columns , girders, roof trusses, purlins, bracings,platforms, ladders, gutters ,brackets etc. situated at all heights and places and removing the material

Labour charges for fittings steel/wooden door/window frames all sizes including grouting of hold fasts etc.

Providing and fixing paneling or paneling and glazed in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts including portion inside groves or rebates to be measured). Paneling

Fabrication of all types MS structural of buildings or supporting structures (columns girders, trestress, roof trusses, frames etc.) with new or old materials to be salvaged from dismantled structures as per drawing or sample or as directed

Erection of all types of structure as fabricatated under item No (2) above at all heights & places with all necessary bolts, nuts, rivets, welding etc. complete as per drawing or as directed, including a coat of red oxide primer and two coa

Fabrication of rain water gutter with 6/5/3.15mm MS sheets (to be supplied free of cost) in required size and shape and erecting the same with necessary clamps & brackets complete including opening & lifting/removing the last row of sheeti

Fixing charge for AC or CGI sheets of all sizes including curved sheets. In roof, cladding etc. at all heights & places including supplying necessary12mm dia GI hook bolts with nuts, 40mmX40mmX1mm thick GI washers,40mmX40mm bitumen washer e

Providing and fixing ISI 250x16 marked oxidized M.S. sliding door bolts with nuts and screws etc. complete:250 x16 mm

Finishing walls with textured exterior paint of required shade :Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.

PROVIDING AND FIXING ON WALL FACE UNPLASTICISED RIGID PVC RAIN WATER PIPES INCLUDING JOINTING WITH SEAL RING ETC. 100MM DIA

PROVIDING AND FIXING FALSE CEILING WITH 12 MM THICK PLAIN/ SEMI PERFORATED OR WITH DESIGN CEILING TILES OF BWP TYPE PHENOL FORMALDEHYDE SYNTHETIC RESIN BONDED PRESSED PARTICLE BOARD CONFORMING TO IS:3087 FINISHED WITH A COAT OF ALUMINUM PR

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing & Fixing 100 mm vertical Blinds having 1.20 mm to 1.30 mm wall tickness head rail 20mm to 25mm high X 40mm to 50mm wide extruded high strength aluminium alloy

WALL PAINTING WITH ACRYLIC EMULSION PAINT OF APPROVED BRAND

Providing and laying vinyl flooring to the required shape & size of approved sample all complete includin fixing with pasting solution as per the manufacturer specifications & directions of E-I-Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:3 (1 cement : 3 coarse sand)

GARG ENGINEERING AND CONSTRUCTION PRIVATE LIMITED

PURNIMA ENGINEERING AND CONSTRUCTION COMPANY

VARUN ENTERPRISES

JUGAL AND CO