Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.4 LAccepted-AOC 0 ZARFIROZE COMPLEX OPP MANGO MARKET BEACHER ROAD VALSAD VALSAD GUJARAT 396001 INDIA UDYAM GJ 25 0010662 | VALSAD | GUJARAT | 396001 | L1 | Accepted-AOC Accepted for acceptance being lowest. | |
| 2 | L2₹19.5 L+₹1.1 L (5.86%)Rejected-Finance | L2 | Rejected-Finance Not L1. | |
| 3 | L3₹20.4 L+₹2.0 L (10.7%)Rejected-Finance MAHARAJA SOCIETY HAPA YARD ROAD NR ALFA PAN STREET NO 6 O S KALWADGET JAMNAGAR GUJ | L3 | Rejected-Finance Not L1. | |
| 4 | L4₹21.8 L+₹3.4 L (18.3%)Rejected-Finance | L4 | Rejected-Finance Not L1. | |
| 5 | L5₹22.0 L+₹3.7 L (19.9%)Rejected-Finance 58 MODERN MARKET NEAR AMBER CINEMA JAMNAGAR | JAMNAGAR | L5 | Rejected-Finance Not L1. |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jamnagar No.2
Air Force-II, Udhyog Nagar, Jamnagar - 361004
CERTAIN B/R REPAIR IN SINGLE LIVING AND OTHER OTM ACCNS UNDER GE (AF) JAMNAGAR NO.2
2023_MES_600876_1
8424/E8
Open Tender
Miscellaneous Works
Item Rate
300 days
Jamnagar
Please refer tender documents
6 documents required · 6 mandatory
₹500
GE (AF) Jamnagar No.2
₹40,000
Yes
11 Jul 2023
3 Jun 2023
26 Jun 2023
3 Jun 2023
24 Jun 2023
17 Jun 2023
Amount
Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) and removing the same to a distance of 1.5 KM including loading and dumping / levelling at the destination complete all as specified and directed.
M&L for 100 mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floor / hard standing etc finishing the surface even and smooth without using extra cement and spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth potection including finished the surface even and smooth without using of extra cement complete all as specified and directed.
Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed.
M & L for 25 mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed.
M&L for non-skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.
M&L for non-skid joint free coloured Ceramic tiles (1st quality) not less than 7mm thick tiles of size exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.
M&L for non-skid joint free coloured Ceramic tiles (1st quality) not less than 7mm thick tiles of size exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 300 x 450 x 8-9mm / 450 x 350 x 8-9mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of mortar in CM 1:4 for laying wall tiles finishes complete all as specified and directed.
Dismantling of kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as specified and directed.
M&L for Granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade complete all as specified and directed.
M & L for machine cut & machine polished kota stone slab 18 to 20 mm thick as in kitchen plateform, treads of steps laid over and including 15 mm thick screed bed in CM 1:6, jointed with grey cement slurry mixed with colour pigment to match the shade of the slab, rubbing and polishing complete all as specified and directed.
18-20mm thick machine cut kota stone slab in riser of steps, skirting,dado and pillar laid over cement mortar in 1:4 base laid and jointed with grewy cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M&L for rounding to edges of Granite / Kota stone slabs edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed.
Dismantling of paver block including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed.
M&L for 100mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in Sub base complete all as specified and directed.
25mm Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M & L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade complete all as specified and directed.
Relaying machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.
S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed.
S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed.
S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.
S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.
S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.
S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.
S&F in repair 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2, fixed as in spout pipe and making good disturbed surface in CM 1:3 complete all as specified and directed.
M&L for cutting holes into or through stone/PCC block wall built cm. and making good in cm 1:3 or PCC type B-1 on required superficial area n exc 150 sq.cm complete all as specified and directed.
Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed.
M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar 1:4 on stone / PCC block masonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured & paid separately
M&L for 5 mm thick rendering in cement mortar 1:3 on on ceiling, ifinished the surface even & smooth without using extra cement complete all as specified and directed.
Supply only Liquid water proofing compound complete all as specified and directed.
M & L for preparation of new plastered surfaces of walls & applying two coat of Distemper oil emulsion over a coat of chalk whitening compatible primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coat of cement Base paint over a coat of primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridge, fixed with self tapping screws complete all as specified and directed.
M&L for Providing, cement concrete in coping/ roof kerbs or mud stops, rounded or chamfered on edges type Bo 1:2:4 (using 12.5mm graded stone aggreagte) complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M & L for framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
M & L for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, et conrming to Fe.290.Gde-E-165 complete all as specified and directed.
M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etcforming to Fe.290.Gde-E-165 complete all as specified and directed.
Hollow Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS11611979 grade St-240 complete all as specified and directed.
M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Demolition of brick work / stone work / PCC block masonry built in cement mortar complete all as specified and directed.
M & L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4 type C1 (1:3:6) 20mm graded aggreagate, complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:4 using on other than fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra complete all as specified and directed.
M & L for two coats of oil bound distemper on new plastered surfaces on wall including preparation of new plastered surfaces complete all as specified and directed.
M&L for two coats of Cement Base Paint over a coat of alkali resistant primer on newly plastered surfaces of walls including preperation of new surfaces complete all as specified and directed.
M&L for rendering 10 mm thick in CM 1:6 using on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed.
JAY DWARAKDHISH ENTERPRISE
sanu enterprise
SURAJ ENTERPRISE
fakhrie apostrical
vishot construction
shree chamunda enterprise
R.H.ENTERPRISE
M/s Punnsons India
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .