Co Public Toilet block at Bharari Near HPPWD Store Sub Tehsil Bharari District Bilaspur HP

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (up to all width), including dressing of sides and ramming of bottoms, up to all lift, including getting out the excavated soil and disposal of surplus excavated soil all lead and lifts as directed by the Engineer-in- charge. (a) All kinds of soil.

Centering and shuttering including strutting, propping etc. and removal of form for all height including carriage of material in all leads and lifts.

Foundations, footings, bases of columns, etc. for mass concrete

Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platform

Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level including carriage of material in all leads and lifts.

Providing and laying in position 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level including carriage of material in all leads and lifts.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete including carriage of material in all leads and lifts. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 with cement mortar 1:4 (1 cement :4 coarse sand) in superstructure above plinth level up to all level. including carriage of material in all leads and lifts.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) including carriage of material in all leads and lifts.

Providing and fixing of powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) including carriage of material in all leads and lifts.

Providing and fixing glazing with float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) including carriage of material in all leads and lifts.

Providing and fixing bakelite sheet for doors panels ( thick ness not less then 6mm) as per achitectural drawings and directions of Engineer-in-charge. including carriage of material in all leads and lifts.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of material in all leads and lifts. (a) 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts. (a) 300x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts. (a) 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete including carriage of material in all leads and lifts. (a) Twin rubber stopper

Providing and laying anti skid vitrified floor tiles as per sample approved by the Engineer-in- Charge in different sizes (thickness not less then 10 mm) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all leads and lifts.

Providing and fixing Ist quality ceramic glazed wall tiles as per sample approved by the Engineer-in- Charge in different sizes (thickness not less then 10 mm) of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. including carriage of material in all leads and lifts.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. including carriage of material in all leads and lifts. Granite of any colour and shade Area of slab upto 0.50 sqm

6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts.

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts.

20 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of material in all leads and lifts.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material in all leads and lifts.

Wall painting two or more coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including carriage of material in all leads and lifts.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of material in all leads and lifts.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.including carriage of material in all leads and lifts.

15 mm dia nominal bore

20 mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including carriage of material in all leads and lifts.

Providing and fixing ISI marked high pressure PVC spigot and socket, waste and ventilating pipes including fixing with approved adhesive etc. complete. including carriage of material all lead and lifts.

110 mm dia

90 mm dia.

Providing and fixing PVC single equal branch with oval access door, insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. including carriage of material all lead and lifts.

110 mm dia

90 mm dia.

Providing and fixing PVC collers including fixing with approved adhesive etc. complete. including carriage of material all lead and lifts.

110 mm dia

90 mm dia.

Providing and fixing PVC plain bend including fixing with approved adhesive etc. complete. including carriage of material all lead and lifts.

110 mm dia

90 mm dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material all lead and lifts.

110 mm dia

90 mm dia.

Providing and fixing PVC double equal branch with oval access door, insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. including carriage of material all lead and lifts.

110 mm dia

90 mm dia.

Providing and fixing white vitreous china pedestal type water closet (European type) with ISI marked white solid plastic seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including carriage of material all lead and lifts.

Providing and fixing wash basin size 560mm x 400mm (oval type under counter) mm with , 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including necessary of fittings and making good the same wherever require including carriage of material all lead and lifts.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of material all lead and lifts.

Providing and fixing stainless steel soap dish with brackets fixed to wooden cleats with S.S. screws including carriage of material all lead and lifts.

Providing and fixing stainless steel towel ring with necessary concealed fittings arrangement of approved quality including carriage of material all lead and lifts.

Providing and fixing C.P. brass 15 mm nominal bore bib cock of approved quality conforming to IS:8931 including carriage of material all lead and lifts.

Providing and fixing C.P. brass 15mm nominal bore angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of material all lead and lifts.

Providing and fixing 20 mm nominal bore having 45 cm length uplasticised PVC connection pipe with brass unions including carriage of material all lead and lifts.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required including carriage of material all lead and lifts. (a) Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing Division plate for urinals 600mmx300 size vitreous china including carriage of material all lead and lifts.

Constructing brick masonry road gully chamber 50x45x60 cm with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design including carriage of material all lead and lifts.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of material all lead and lifts.

Inside size 90x80 cm and 45 cm deep including SFRC cover with frame (light duty) 455x610 mm internal dimensions, with Sewer bricks conforming to IS : 4885

Please Enable Macros to View BoQ information