Miscellaneous civil work at arrival and departure hall area including extension arrival immigration area and shifting of offices NITB

Amount

Carriage of Materials by mechanical transport including loading, unloading and stacking : for a lead of 1 km Lime, moorum, building rubbish .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed wit cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 100 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar .

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in- charge.

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Dismantling E.W.C. wall hung of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling and removing Concealed flush valve of E.W.C/IWC/ urinals including all fixture and accessories all complete as per directions of Engineer-in- Charge.

Dsimantling of short /long body bib cock including accessories complete and stacking of usable dismantled materials including disposal of waste materials / malba all complete as per the direction of Engineer in charge.

Dsimantling of health faucet including removal of angle cock/two way bib cock , holder and other accessories complete and stacking of usable dismantled materials including disposal of waste materials / malba all complete as per the direction of Engineer in charge.

Dismantling Flat back Wash Basins/Counter top/counter bottom of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling tile work in walls laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Dsimantling of bottle trap including accessories complete and stacking of usable dismantled materials including disposal of waste materials / malba all complete as per the direction of Engineer in charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 6 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 6 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand).

Providing and fixing Ist quality ceramic designer wall tiles of size 300 X 600 mm of minimum thickness 5 mm of approved colour , shade and make such as Exim H 63062/ H 63066 or equivalent make in skirting, risers of steps and wall, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as the direction and satisfaction of Engineer in charge.

Providing and laying Ceramic floor tiles of size 300x600mm or more (thickness to be specified by the manufacturer), of 1st quality , of approved make, in all colours, shades, such as Exim H 63062/ H 63066 or equivalent laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing PVC moulded corner beading as tiles trim to the junction of tiling work.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) P or S trap of RAK Victoria S White or equivalent with seat and lid, including integrated flushing system with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required .

Providing and fixing white wall hung type water closet (European type W.C. pan) with seat and lid of make RAK WMTG ELORA WHITE with S/L S/C or equivalent, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Providing and fixing concealed flush valve of make JAQUAR J1085 or equivalent with all fittings and fixtures complete, including cutting and making good the walls and connecting to existing water lines and finishing wherever required as directed by Engineer in charge

Providing and fixing Health faucet with hose,lever & holder of JAQUAR make ALD CHR-593N or equivalent etc all complete as per the direction of Engineer in charge.

Providing and fixing vitreous china, counter wash basin of make RAK GEM 55 cm WHITE or equivalentwith 32 mm CP brass waste of make ALD 709 or equivalent, and other ancillary fittings including painting of fittings and brackets, cutting and making good the walls wherever required.

Providing, installing and fixing in position Electronic Washing system for wash basin with electronic tap (E/tap) of make JAQUAR SNR - CHR- 51027 or equivalent including all fittings and accessories complete

Providing and fixing CP brass two way bib cock of make JAQUAR ARI-39041 or equivalent etc complete as per the direction and satisfaction of Engineer in charge

Providing and fixing PVC pipes of ISI marked Finolex or equivalent make and jointing with necessary sockets, elbows, solvent cement etc all complete as per the direction and satisfaction of Engineer in charge. 50mm Ø pipe 6 kg/cm2

Providing and fixing PVC pipes of ISI marked Finolex or equivalent make and jointing with necessary sockets, elbows, solvent cement etc all complete as per the direction and satisfaction of Engineer in charge. 90mm Ø pipe 6 kg/cm2

Providing and fixing PVC pipes of ISI marked Finolex or equivalent make and jointing with necessary sockets, elbows, solvent cement etc all complete as per the direction and satisfaction of Engineer in charge. 110mm Ø pipe 6 kg/cm2

Providing and fixing 6 mm thick mirror of superior glass of approved make and of required shape and size with hard board backing etc., with all necessary fittings and finishing’s etc complete as per the directions of Engineer in charge.

Providing and fixing Stainless Steel gratings of 125 mm dia etc complete as per the direction and satisfaction of Engineer in charge.

Dismantling Cp brass Angle cock of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling Cp brass toilet paper holder of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling E taps of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Providing and fixing 10 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge.including ( OFH 6600E Single Cylinder Floor Spring, OGH 55 25X450mm H Type Handle with SSS, OFS ACC GDP Top Pivot Patch/point, OPL 1E Patch Lock to Swing Door/ ceiling)

Providing and Fixing 10mm Toughened glass with patches (OPF 640) etc complete all as per direction of Engineer in Charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, Fasteners etc.)(Material Supplied by Department)

Providing and fixing 75 mm with approved colour and finish 4 mm thick veneer 200 mm with groove finished partition(Both side ) with 12 mm thick marine ply wood (both side ) fixed on steel frame work including necessary polishing also including the cost of making openings for doors ,windows, cutouts made with frame suitably fixed and all edges finished with suitable lippings etc all complete as per drawing and specification and direction of the Engineer in Charge, etc complete all as per the direction of engineer in charge. (Necessary steel work will be measured seperately)

Providing and fixing 4 mm thick aluminium composite panel ,3000 series(of approved colour / shade) having skin material of 0.50 mm aluminium on each side and core material of natural polyurethane for wall cladding/rectangular/square cladding and ceiling at all levels and height, fixed in pre-size of infill panel including structural sealant etc. with water tight and air-tight system either curved or straight in plan. The aluminium composite panel to be fixed with extruded aluminium basic frame , angle cleats, rivets, G.I. brackets all as approved using suitable hitli / fisher / anchor bolts on RCC/structural works including necessary accessories complete in all respects as per drawings, specifications and as directed by Engineer in charge. ( Item includes cost of ACP Panel, Weather Sealant, Gasket, Foam, Scaffolding, Fixtures all machineries and all taxes . The aluminium extruded sections used for basic frame shall be paid seperately)

Amount Excluding GST

M SYED ISMAIL