PROVN OF TRAINING SHED AND CONNECTED PATHWAYS FOR PT GROUNDS AT NO 2 TRAINING BATTALION BEG AND CENTRE ROORKEE

Amount

Site Clearance soft/loose soil complete all as specified and as directed.

Excavation in trenches,n exc 1.5m wide and n exc 1.5m in depth : for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L P.C.C type D-2 1:4:8 (40mm graded aggregate) in foundation filling and mass concrete complete all as specified and as directed.

M&L Formwork to sides of rough finished flat surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

M&L Formwork to sides of rough finished flat surface of concrete sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L Formwork to sides of rough finished flat surface of concrete Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified and as directed.

M&L Formwork to soffits of flat suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

M&L Formwork to flat and rough finished surfaces of chullah hoods, chajjas, troughs and similar items in cluding edge complete all as specified and as directed.

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L Mild steel bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for Reinforced Cement Concrete (Nominal Mix) Type A1 (1:11/2:3) (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete (Nominal Mix) Type A1 (1:11/2:3) (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for RCC (1:1.5:3) Type A1 (Nominal mix) (using 20mm graded granite stone aggregates) as in Beams, lintels and etc., complete all as specified and as directed.

M&L for RCC Type A1 (1:11/2:3) (using 20mm graded granite stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC Type A1 (1:11/2:3) (using 20mm graded granite stone aggregates) as in chajjas and in shelves and the like complete all as specified and as directed.

M&L brick work Old size sub class B bricks in CM 1:6 straight or curved on plan exc 6m mean radius complete all as specified and as directed.

M&L brick work Old size sub class B bricks in CM 1:4 straight or curved on plan exc 6m mean radius in half brick walls complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work in CM 1:6 or concrete sur faces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work in CM 1:4 or concrete sur faces fini;shed even and smooth without using extra cement complete all as specified and as directed.

M&L two coats of cement based paint over a coat of primer including preparation complete all as specified and as directed.

M&L Rendering 10mm thick on fair faces of brick work in CM 1:3 or concrete sur faces complete all as specified and as directed.

M&L three coats of white wash over including preparation complete all as specified and as directed.

M&L for Hardcore of broken bricks of gauge n exc.63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 100mm Cement concrete type B-2, (1:4:8) (40mm graded aggregate) as in sub floor complete all as specified and as directed.

M&L 25 mm Cement concrete type B-0, (1:2:4) (12.5mm graded aggregate) as in sub floor complete all as specified and as directed.

S&F non skid ceramic coloured tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. over 15mm thick screed bed in CM 1:6 and set and jointed in neat slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350 x 250 x 7 mm/ 450 X 350 X 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.

S&F for Solid PVC door frame of size 50 mm x 47 mm, made out or 5 mm, plain colour PVC sheet, reinforced with MS Square tube complete all as specified and as directed.

S&F for Factory made solid panel PVC door shutter, 30 mm thick (Style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' chanel on both sides having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on both sides and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification & drawing acomplete all as specified and as directed.

S&F butt hinges, medium weight ,mild steel of 100mm long size complete all as specified and as directed.

S&F for aluminium, anodised, barrel tower bolt of extruded section, 150mm long, complete all as specified and as directed.

S&F extruded aluminium alloy handles, 150mm long size, fabricated type, anodised complete all as specified and as directed.

M&L Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.

M&L 4.8 mm thick Sheet glass, one side frosted quality and glazing without oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F for Steel water tubing,15mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F for Steel water tubing,20 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fix rotational moulded polyetylene water storage tanks ISI marked of 500 litre capacity (Cylindrical vertical with closed top)hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and as directed.

S&F gun metal gate valve 20mm dia, cast copper alloy screwed pressure with crutch or butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and as directed.

Supply & Fixing CI sand cast pipes 75mm borein floors, fixed or laid in trenches complete all as specified and as directed

Supply & Fixing CI sand cast pipes 100mm borein floors, fixed or laid in trenches complete all as specified and as directed

Supply & Fixing CI sand cast pipes 100 mm bore in floors, fixed on walls or laid in trenches fixed in complete all as specified and as directed

S&F Cast Iron Bends any radius 75 mm bore with fixed in any position fixed complete all as specified and as directed.

S&F Cast Iron Bends any radius 100mm bore with fixed in any position fixed complete all as specified and as directed.

S&F Cast Iron Single Branch Piece (T junction) 100mm bore with oval assessed door fixed in any position fixed complete all as specified and as directed.

Supply and fix CI vent cowl of 110mm bore with complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including 1.5m jet spray & Seat Cover with P or S trap complete all as specified and directed

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) include P or S trap complete all as specified and directed

PVC valveless, syphonic action type flushing cistern, low level 10 ltr capicity Dual Flush Mechanic incl, PVC flush pipe 32 mm bore and mild steel brackets of angle iron 25 x 25 x 3 mm, oval all length 20 cm with red-oxide primer complete all as specified and making good the disturbed surfaces in CM 1:3 complete all as specified and directed.

S&F angle cock with flange cast copper alloy cast copper alloy, chromium plated, screwed down high pressure, fancy type with long shank and cup , screwed both ends for 15mm bore iron pipe or for union and fixed complete all as specified and directed

S&F 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete and fixedc complete all as specified and directed,

S&f Bib Cock with flange Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F Vitreous china wash hand basin white flat back size 550 x 400 mm including PVC waste pipe 32 mm bore and CP Waste coupling with and incl a pair of suitable mild steel brackets, fixed including cutting for or pinning in and making good disturbed portion as reqd ccomplete all as specified and as directed.

S&F CP brass or stainless steel grating 100/ 125mm dia/ size square or round with or without waste hole fixed complete all as specified and as directed.

S&F Pillar tab Chromium plated brass/ cast copper alloy fancy type, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F Brass chromium Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

M&L for carrying out water proofing treatment for roofs in the following stages - (i) Rendering 10 mm thick plaster/ screed in cement mortar (1:4) mixing with water proofing compound (as per manufacturer instructions) and surfaces finished even and smooth without using extra cement all as specified . Note : (WPC shell be measured separately and paid for under respective item of schedule). (ii) First coat of bitumen primer conforming to IS-3384 @ 0.40 Kg/Sqm over plastered surfaces. (iii) Second coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm. (iv) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric with aluminum based reflective paint. (v) Final coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg per Sqm.

S&F 32 mm Waste coupling of PTMT (Half or Full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) for WHB complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) as in kerbs, coping in wall or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Providing and laying 60mm thick factory made (ISI Marked) chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laquer finish laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Excavation in trenches/ post holes n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L cement concrete (nominal mix) type B1 1:2:4 (40mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

Material and Labour for Steel tubular Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, Plate for joining angle, cleat, etc) including distance pieces, cleats etc conforming to I. S.1161- 1979 grade Fe-290 (Gde St.-165 complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide on steel surface exceeding 10 cm in width or girth including preparation of surfaces and including necessary sacffolding complete all as specified and directed.

Material and Labour, for pre-painted, galvalume aluminium zinc coating GI based profiled steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L two coats of OBD over a coat of primer including preparation ccomplete all as specified and as directed.

M&L for machine cut Kota stone slab 18-20 mm thick, laid over and including 20mm thick screed bed in cement mortar (1:6) using coarse sand as in flooring, set & jointed in neat grey cement slurry and ponted in white cement mixed with pigment to match including grinding and polishing to granite finish complete all as specified and directed.

M&L machine cut kota stone slab 18-20mm thick in riser of step, skirting, dado and piller over cement screed base 10 mm thik 1:6 cm laid and jointed with grey cement slurry mixed with pigment to match the shade of the the slab including grinding, rubbing and polishing complete all as specified and as directed.

M&L 75mm thick cement concrete (1:3:6) type C2 (using 40mm graded stone agg). Plinth protection laid to a slope of 1 in 24 in alternate basis system. Each bay shall not exceed 3m in length. 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with mastic filling to full depth comprising a mixture of 1 part of hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) etc complete all as specified and directed.

M&L for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, tower bolt complete with glazing bars, dovetailed or welded including soap coat complete all as specified and directed.

M&L for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, towe bolt complete with gauzed bars, dovetailed or welded including soap coat complete all as specified and directed.

S&F framed work such as grills gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars barred iron doors, door chowkat , ladders; framed balusters; walk ways; railings; framework of water tanks, hold fast, sheet and similar work conforming to Fe-410-0 or Fe 310-0 complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hard wood glazed and skelton shutter (two or more panel) single or double leaf open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

S&F 300mm long Aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint in new surface over a coat of pink primer on wooden surface exceeding 10 cm in width or girth including preparation of surfaces and including necessary sacffolding complete all as specified and directed.

S&F 6mm thick designer non asbestos cement building board of size 60 cm x60cm fixed of laid inserted to GI frame work using main tee of size 24x38x0.5 mm and cross tee of size 24x28x0.5 mm made out of PGI sheet 0.30 mm thick doubled at web and single flange ,flange cover with powder coated sheet 0.25 mm thick for ceiling suspended with GI wire 4 mm dia upto 2 mtr long complete all as speified and directed. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing).

M&L for providing, cement concrete (1:2:4) B1 (20 mm graded agg) in roof kerbs or mud stops, rounded orchamfered on edgec lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ater troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for providing precast cement concrete (1:2:4) 20 mm gragaded aggregate in landings, cover slabs (for man holes etc.) chullah hoods chajja water trough shelves and similars articles with plain face including demolition of RCC slab any type complete all as specified and directed.

M&L brick work old size sub class B bricks in CM 1:4 straight or curved on plan exc 6m mean radius complete all as specified and directed.

Supply & Fixing tubular MS poles complete with cast iron base plate, final taper, plug, bolts, nuts & washers as specified type 410 SP-31 (9.0 mtr long) incl PCC in foundation complete all as specififed and directed.

Supply & fix PVC Junction box of size 350x250x150 mm with Aluminium bus bars 04 Nos fixed on pole with the help of MS nuts bolts and MS clamps-2 Nos of size 40mm X 5mm thick with one No MCB SP 6 Amp capacity includes making suitable hole on pole to take out connections to fitting if required at site and PVC insulated sheathed multistranded copper conductor 3 core 1.5 Sqmm for making connection from junction box to security light fitting complete including provn of cable glands for incoming and outgoing cables complete all as specified and directed.

Supply and fix in replacement of LED Street Light Luminaire 120 Watt with pressure die cast housing along with prismatic polycarbonate diffuser and LEDs with secondary optics and IP65 protection including brackets made out of Gl pipe light grade of suitable dia or as per manufaturere recommonded, bent to shape incl 04 Nos MS flat bent to shape incl 04 Nos MS flat clamps, nut bolts, termination with the help of 3 core 2.5 Sqmm PVC insulated, unsheathed copper conductor multistranded cable complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of cross sectional area as given below complete all as specified and as directed.:-

4 Core 16 Sqmm

2 Core 16 Sqmm

Supply and laying river sand for cushioning with layers of sand 8cm before lying of cable and 15c, after lying of cable (Total 23cm) in trenches complete all as specified and directed. Note - Thickness after punning shal be measured for payment.

Supply and laying brick protection cable cover using sub class 'B' bricks laid flat adjacent to each other across the length of cable laid dry complete all as specified and directed.

M&L for PCC work type C-2 (1:3:6) with 40mm graded aggregate for foundation to poles/stays/strutus or basements etc complete all as specified and directed.

Drilling and tapping cast iron water mains (in position) for branch connection of the internal dia of 25 mm with reducer socket 25mm x 20mm complete all as specified and directed.

M&L for Straight plain brass ferrules (or connecting screws) screwed both ends and fixed to water mains for tapping branch corinection of size 25 mm bore complete all as specified and directed.

Supply and Fix Gun metal gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe, fixed in repairs complete of size 15 mm bore complete all as specified and directed.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS-H) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit/casing caping and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-

One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

One 3pin/5pin 5/6 Amps socket outlet on same board controlled by one, one-way Piano type switch complete all specified and directed.

One 3pin/5pin 5/6 Amps socket outlet on independent board controlled by one, one-way Piano type switch complete all specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole one way, 230 volts, 50 hz complete all as specified & directed.

S&F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as speccified and directed .

All as per item No 96 above but with 2.5 Sqmm (nominal area) FRLS-H cable PVC for the 15 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor green colour for earth continuity conductor complete all as specified & directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type, complete all as specified & directed.

S&F switch piano flush type polycarbonate single pole one way 15 Amps complete all as specified & directed.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 4 way with 200 Amps rated busbar all as specified and directed.

S&F Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar, earth bar, single pole and neutral 250 volts, flush to wall complete all as specified and directed

Supply & fixing MCB, SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F LED tube light batten 20 watts 4 fts extruded polycarbonate housing, translucent diffuser with LED light source , 2000 lumen, natural white ,surge protection range- 2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

Supply and fix LED 25 watt Building security light fitting mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver,including bracket clamp and fixing accessories complete with electronic driver and all accessories. The fitting shall IP 66 protection, duly prewired complete all as specified and directed.

Supply and fix ventilating / PVC exhaust fans fancy square type 225mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan & making good including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed.

M&L for maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron, UL listed, CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit (resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7. The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS-H insulated copper conductor of size 6 sqmm, single core cable drawn through and including medium grade rigid PVC conduit upto 10 mtr incl cutting and chases on wall / floor and making good using PCC work, including transport, labour etc, complete all as specified and directed.

A.S. CONSTRUCTION COMPANY

AMAR NATH SHARMA

IRFANAHMAD CONTRACTOR

M/S MSD & Associate

RAJENDER CONSTRUCTION CO

VIMAL CONSTRUCTION CO

CHITTER MAL & CO