Iron Staircase in Class B Kothies and repair in kothi No. 4 and quarter No. 124 in Canal Colony, Jagadhri.

Amount

Dismantling Concrete: Cement Concrete Plain 1:2:4 mix

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, include ing disposal of all surplus soil, as directed within all lead and lift.

Cement concrete 1: 4 :8 with brick ballast 20 mm nominal size in foundation and plinth.

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth.

Structural steel work in angles, tees and flats, welded including cutting fixing all gusset plates, bolts, nuts, welding rod, etc., with hoisting and erecting in position:- For roof trusses, well kerbs, plates and trussed girders, etc., of any span for buildings and bridges

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantlled:- doors in Quarter No. 124

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - Door and window frame size 127 mm X 50 mm with 40 mm wide double rebate.

Factory manufactured panelled door or gla- zed window, shutters of commercial hard wood, such as hollock, champ, chikrassy & chaplash etc. (non-coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln-seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., completefixed in position (excluding the cost of any fittings, other than specified above, but inc- luding labour for fixing the same in position)-Bathroom Door in Quarter No. 124. 30 mm thick

Painting on Wooden Surfaces etc: Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, lin- seed oil, varnish and chalk mitti includeing finishing the surface to required finish complete Bathroom Door in Quarter No. 124.

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc as per Sr. No. 9.1

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade as per Sr. No. 9.1

Laying and fixing ceramics and glazed tile of any size of approved size in floors /dados lain in any pattern as specified over base of 3 mm thick adhesive of reputed brands such as Pidilit, Laticreto, Ferrous-creteand Velendure as per IS specification 15477-2004 using 5 Kg. adhesive per Sqm area of tiles and joined with white cement surry mixed with pigment to match the shade of tiles excluding cost of tiles in Kothi No. 4

Painting on Metallic Surfaces etc. Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two coats excluding priming coat with ready- mixed paint for metellic surfaces in all shades on new steel or iron work

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). In Kothi No. 4 (a) Bib cock long body

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). (b) Bib cock sparrow with Perimix and flange. In Kothi No. 4

Providing and fixing in position super quality 65mm i/d opening C.P. brass dome type hinged grating weighing about 750gms, fixed in cement mortar 1:2 complete in all respects (as required by the Engineer-in-charge). In Kothi No. 4

jarnailsinghcontractor