PROVN OF GUARD ROOM AT SHAHIBAGH OFFICER ENCLAVE RWA, 11 RAPID (H) ORD UNIT OF AHMEDABAD CANTT

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : 07/LBW/STN HQ/A'BAD/2024-25/Q3 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.

Surface Excavation N.exc (not Exceeding) 30 Cm Deep And Averaging 15cm Deep And Getting Out In Soft/loose Soil complete all as specified and directed.

Removing excavated material but n.exc 250 mtr but n exc 500 m and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed.

M &L for Earth Work In Excavation By Mechanical Means (hydraulic Excavator) Means Over Areas (exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5m, As Directed ( All Kinds Of Soil) complete all as specified and directed.

M &L for Earth Work In Excavation By Mechanical Means (hydraulic Excavator) Means Over Areas (exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5m, As Directed ( All Kinds Of Soil) complete all as specified and directed.

M & L for Earth Work In Excavation By Mechanical Means (hydraulic Excavator)/ In Foundation Trenches Or Drains (not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.complete all as specified and directed. ( All Kinds Of Soil)

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for Treating The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (area Of The Sub Structure In Contact With Backfill To Be Measured) complete all as specified and directed.

M & L for Treating The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface complete all as specified and directed.

M & L for Treating The Soil Along With External Perimeter Of Building At The Rate Of 2.25 Litre Of Emulsion Per Metre Of The Perimeter Wall complete all as specified and directed.

M & L for Treating The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Area complete all as specified and directed.

M & L PCC (1:4:8) Type D2(40 Mm Graded Aggregate) For Footing and plinth beam complete all as specified and directed.

Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm In Soft To Loose Soil complete all as specified and directed.

Removing Excavated Soil Not Exc. 50m And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point complete all as specified and directed.

M & L for Rcc- M-25 (design Mix) Using 20mm Graded Aggregatefor Foundation, plinth beam ,including Rafts As Mass Concrete complete all as specified and directed.

M & L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Foundation, plinth beams surfaces complete all as specified and directed.

S & F Tmt Bars 10mm Dia & Over for Reinforcement Steel (tmt Bars) For Footing, column, plinth beam, lintel, slab beam, chajja, slab etc complete all as specified and directed.

M & L for RCC- M-25 (design Mix) Using 20mm Graded Aggregate For Column, pillars, piers, posts & struts etc complete all as specified and directed.

M & L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For square/rectangle Column pillars, piers, posts & struts etc all as specified and directed.

All as item No 1.18 but 5 To 10mm Dia In Stirrups, Spacers & Binders complete all as specified and directed.

M & L for Brickwork With Fly Ash Bricks, Straight Or Curved On Plan Exc 6m Mean Radius, Built In Cm (1:6) modular brick complete all as specified and directed.

M & L for Brickwork With Flyash Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Thick Walls, Built In Cm (1:4) complete all as specified and directed.

M & L RCC- M-25 (design Mix) Using 20mm Graded Aggregate For Lintel Band complete all as specified and directed.

M & L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Lintel Band complete all as specified and directed.

M & L for RCC- M-25 (design Mix) Using 20mm Graded Aggregate For Chajja complete all as specified and directed.

M & L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Chajja complete all as specified and directed.

M & L for RCC- M-25 (design Mix) Using 20mm Graded Aggregate For Slab supported on walls , beams and columns in floors, roofs , landings, balconies, canopies, deck slab and in shelves complete all as specified and directed.

M & L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Slab supported on walls , beams and columns in floors, roofs , landings, balconies, canopies, deck slab and in shelves complete all as specified and directed.

M & L for RCC- M-25 (design Mix) Using 20mm Graded Aggregate For Parapet, fins , facscia, louvers and railings complete all as specified and directed.

M & L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Parapet fins , facscia, louvers and railings complete all as specified and directed.

M & L for 10 mm Thick 1:6 Cm Internal Plaster On Fair Faces Of Walls Finished Even And Smooth (without Using Extra Lime Or Cement) complete all as specified and directed.

M & L 10 mm Thick 1:3 Cm Plaster On Ceiling. Finished Even And Smooth (without Using Extra Lime Or Cement) complete all as specified and directed.

M & L 15 Mm Thick (10 Mm + 5 Mm 1:6 Cm) External Plaster On other than Fair Faces Of Walls Finished Even And Smooth (without Using Extra Lime Or Cement) including WPC @ 3 % by weight of cement complete all as specified and directed.( Note : WPC shall be measured and paid seperately)

Supply Only Water proofing compound complete all as specified and directed.

M & L Pcc 1:3:6 Type C-0 Filling In Door Frame complete all as specified and directed.

M & L for 105 X 60 X 1.25 Mm Thk. Pressed Steel Frame complete all as specified and directed.

S & F Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl decorative laminated sheet on both faces complete all as specified and directed.

S& F Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc. (without Sash Bars), Edges Of Framing Plain, Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass, Etc.; Sizes Of Me-mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (a); Supplied And Fitted To Chowkats complete all as specified and directed.

S & F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

S&F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete all as specified and directed.

S & F Aluminium Handles Cast Anodised 125 Mm Long complete all as specified and directed.

S & F Aluminium Drop Bolt Of 150 Mm Long all as specified and directed.

S&F Floor door stopper 150mm of amuminium alloy body and tongue, nodised, with dard drawn steel spring all as directed.

S&F for butt hinges 100mm size medium weight stainless steel .

S&F Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding 3 track , AC opening using powder coated aluminium sections of approved make, with or without sash bars, suitable for 5 mm thick glazing and Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangementsetc, frame of window should be of 1.5 mm thick section & shutter sec including cutting down existing glazed/gauge shutter complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

S & F Framed Work Such As Grills, Gratings, Etc.. With Ends Of Bars Shouldered And/or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Conforming To Fe.290.gde-e-165 complete all as specified and directed.

M & L for preparing newly plastered surface and applying Two Coats Of Oil Bound Distemper Over One Coat Of Wall Primer All As Specified With Approved Colour Pattern On Walls, Beams, Soffits, Columns, Etc.

M & L for preparing newly plastered surface and applying Three Coats Of White Wash All As Specified On Ceilings, Etc. complete all as specified and directed.

M & L for preparing newly plastered surface and applying Two Coats Of Cement Based Paint Over One Coat Of Wall Primer All As Specified With Approved Colour Pattern On Walls,beams,soffits,columns complete all as specified and directed.

M & L for preparing newly plastered surface and applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Wooden Primer complete all as specified and directed.

M & L for Machine Cut Kota Stone Slab Flooring 20-25mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing complete all as specified and directed.

M & L for applying Screed Bed Or Bedding Layer Of Mortar Cm(1:3) 20mm Thick For Laying Floor Finishes As In Base complete all as specified and directed.

S & F Non - Skid Ceramic coloured Tiles 7 To 8 Mm Thick (square/rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match complete all as specified and directed.

M & L for applying Screed Bed Or Bedding Layer Of Mortar 10 Mm Thick For Laying Floor Finishes In CM 1:6 complete all as specified and directed.

M & L for Cement Concrete 25mm Thick 1:2:4 Type B0 (40mm Graded Aggregate) As In Sub Base complete all as specified and directed.

M & L for Cement Concrete 75mm Thick 1:4:8 Type D2 (40mm Graded Aggregate) As In Sub Base complete all as specified and directed.

S & F Non - Skid Ceramic Tiles 7 To 8 Mm Thick (square/rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match complete all as specified and directed.

M & L Glazed Ceramic Tiles In Vertical Surface 350x 250x 7 Mm/ 450x 350x 7mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match complete all as specified and directed.

M & L for 10 mm thick rendering on cement concrete as in ceiling with cement mortar 1:3 complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 20mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including bitumen filling in between panels etc complete all as specified and as directed.

M & L for Hardcore Of Guage Exc 63mm But N Exc. 100 Mm, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rolled/rammed To A True Surface complete all as specified and directed.

M & L for water proofing treatment as under (a) Material and labour for rendering 10 mm thick in CM 1:4 using 100 % coarse sand on roof including WPC as per manufacturers instruction. (b) Material and labour for applying a coat of oil based bituminous primer @ 0.25 ltr / Sqm and allow to dry. (c)Material and labour for applying a coat of hot blown bitumen of grade 85/25 @ 1.2 kg /Sqm (d) Material and labour for laying 3 mm thick polymeric water proofing membrane of weight not less than 3 kg/sqm including overlapping 100mm on width and 75mm on length and sealing the joint (e) Applying tack coat of hot blown bitumen of grade 85/25 @1.2 kg/sqm (f) Applying two coats of aluminium paint on bituminous surface all as specified and directed.

S & F Vitreous China Squatting Pan, ‘orissa’ Pattern, Size 580 X 440 Mm White, With Integral Foot Rests (excluding Flushing Cistern And Flush Pipe) complete all as specified and directed.

S & F Vitreous China Premium/ 1st Quality Wash Down Water Closet Wall Hung Ewc White/ Ivory/off White ( Closed Pattern Incl All Necessary Accessories Like Rag Bolts/ Gel Gasket Etc. ( Excluding Flushing Cistern & Flush Pipe) complete all as specified and directed.

S&F 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S & F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as specified directed.

S & F Toilet paper holder, vitreous China, box type all as specified and directed.

S & F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S & F Steel water tubing, medium grade, galvanised with & including all tube fittings & fixed / consealed in walls and ceiling or laid in floors including testing complete of 15 mm bore complete all as specified and directed.

S & F Steel water tubing, medium grade, galvanised with & including all tube fittings & fixed / consealed in walls and ceiling or laid in floors including testing complete of 20 mm bore complete all as specified and directed.

S&F health faucet with one meter tube and hook complete all as specified and directed.

S&F in repairs shower rose 150 mm dia/square of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed.

S&F wall mounting Mixture valve of Chromium plated, 15mm bore complete all as specified and directed. Make : Jaquar/Kohler or equivalent

S&F in repairs angle stop valve of cast copper alloy chromium plated (fancy type) screwed for iron pipe of 15mm bore all as specified and directed. Make :- Jaquar/Kohler or equivalent

S & F Stop valves 20 mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F C I Nahani Traps 75mm Bore complete all as specified and directed.

S & F C I Floor Traps 75mm Bore complete all as specified and directed.

S & F vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated fancy type pillar tap 15mm bore, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

S&F 15 mm dia bore pillar taps cast copper alloy with capstan heads chromium plated fixed in repairs 15mm bore fancy type screwed down, high pressure with long screwed shanks and fly nuts, screwed down for iron pipe or for union complete all as specified and directed.

S&F in bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl incl fittings and fixtures like bend , elbow, Y(equal or unequal),tee etc.complete all as specified and directed.

S & F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl incl fittings and fixtures like bend , elbow, Y(equal or unequal),tee etc.complete all as specified and directed.

S & F PVC(SWR) bends 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F PVC(SWR) bends 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 25mm bore (Minimum weight 210 gms) complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and not exc 1.5m depth for foundation etc and getting out in soft/loose soil.

Returning filling in incl. spreading, leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil.

Removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point.

M & L for concrete bed in cement concrete 1:4:8 type C - 2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested of pipe 200 mm dia complete all as specified and directed

M & L 200 mm bore Reinforced concrete pipes, class NP 03 laid and jointed complete with collars complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 using 40 mm graded agg. as in foundation of manhole all as specified and directed.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks.

M&L for PCC 1:2:4 type B 1 using 20 mm graded agg as in copping incl. necessary form work & finishing exposed surface of concrete complete all as specified and shown in drawing

M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in surface channels, benching for manholes all as specified.

M&L for Precast cement concrte type B1 1:2:4 using 20mm graded stone agg set in CM (1:6) in cover slabs for manhole and similar articles etc. complete.

M&L for MS TMT bars 8 mm dia, cut to length, bend to shape required including cranking, bending and binding with MS wire not less than 0.90 mm dia or securing with clips.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls, finished even & fair w/o using extra cement.

Extra for forming fair finished drains or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds materials/stoppage and complete all as specified

Cutting into exisiting manhole for connecting new drains, making good to pipe rendering, cutting out exisitng benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-

One light point controlled by one switch.

One Ceiling/Ex/Venti fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed.

S&F switch piano flush button single pole one way 6 amp complete all as specified and directed.

S&F switch piano flush button single pole one way 16 amp complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed.

S&F socket outlet 3 pin, 6 amp, flush type complete all as specified and directed.

S&F ceiling rose 6 amp, 3 terminal polycarbonate body complete all as specified and directed.

S&F LED batten (20W) made of Polycarbonate housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2400 lumens at a minimum system efficacy of 120+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.90,IP rating IP 20 complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-5 of SSR Part-I. complete all as specified and directed.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete all as specified and directed.

S&F LED 25W building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp.

Double pole 32 amp.

Supply & fix exhaust fans AC single Phase 230/240 V of size 300 mm sweep with louver, metal body complete all as specified and directed.

Supply and laying DWC(Double wall corrugated) HDPE pipe,ISI marked,IS 16205(part 24):2017 part 2 of outer dia 50 mm and inner dia 38 mmwith smooth internal and profiled external surface for non pressure underground cable including all connected acceseries like coupler,o-ring etc complete all as specified and directed

Supply & Laying ,XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mmX 2Core complete all as specified and directed.

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm (3/4”) dia complete all as specified and directed.

Supply and fix Valve, globe conforming to IS 9338, 50mm (2”) dia pipe complete all as specified and directed.

S&F 20 mm dia , Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with SS inner tank with glass lining and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed

SNEH TRADERS (BID ID -3274205)

DMA PROJECTS (BID ID -3274510)