Loading…
Loading…
Tender Value
₹45.9 Cr
EMD Value
₹24.4 L
Closing Date
16 Jul 2025, 3:30 pmClosed
Conversion of 2 Phase to 3 Phase EHV Power Supply for Nandurbar, Nardana & Dharangaon Railway TSS using High Temperature Low Sag (HTLS) Conductor on Monopole towers under jurisdiction of MSETCL in state of Maharashtra.
EL-TRD-W-118-25-26-5-R
EL-TRD-W-118-25-26-5-R
Open
18 Months
Nandurbar, Maharashtra
₹0
₹24.4 L
19 Jun 2025
19 Jun 2025
A1-Supply of Material for Transmission Line work (Nandurbar TSS)
132 kV D/C "PA+3m (0-2deg)" Suspension Pole
132 kV D/C "PB+6m (2-15deg)" Tension Pole
132 kV D/C "PD+6m (30-60deg)" Tension Pole
132 kV D/C "PD+6m (30-60deg)" Tension Pole with Auxiliary cross arm.
132 kV D/C "PD+9m (30-60deg)" Tension Pole
132 kV D/C "PD+9m (90deg)" Tension Pole with Auxiliary cross arm.
a) Danger Board
"b) Number Plate "
c) Phase plates (Set of RYB)
"d)Circuit Plate (Set of C1 & C2) "
"e) Anti-climbing devices with Barbed wire. "
"a) 132 kV 70KN (N) Poroclain insulator String "
b) 132 kV 120KN (N) Porcelain insulator String
ACCC HTLS Casablanca Conductor (including 2.5% extra for sag and wastage
a) Mid Span Joints
b) Repair Sleeves
d) Vibration dampers
Fiber Optic Cable 48 Fibre
"OPGW Tension Assy Set with JB TENSION ASSEMBLY SET OF OPGW "
OPGW Tension Assy Set without JB TENSION ASSEMBLY SET OF OPGW
"OPGW Suspension Assy Set SUSPENSION ASSEMBLY SET OF OPGW "
48C (DWSM) OPGW 48 Core (DW5M) Optical Ground Wire
48C OPGW Joint Box 48 Core OPGW 2 way Joint Box
"OPGW Vibration Damper Vibration Damper for OPGW Wire HVDC "
"OPGW Down lead Clamps "
A2-Erection of Material for Transmission line work(Nandurbar TSS)
Detailed survey including tower spotting and tower profiles, Detailed survey with GPS, 1 Total station, Digital theodilite etc. along the approved alignment, preparation of profiles, tower spotting, tower schedules and soil resistivity, marking of route on topo sheet and village map, collection of 7/12 of corridor, identification of forest/hatching to mimimize the forest etc. and submission of KML files.
Check survey to carry out check survey as per approved profiles Digital 2 Theodalite/total station/GPS etc. and location marking by fixing three pegs in alignment for suspension tower and by fixing five pegs in bisection for angle tower including bush cutting along the centre line of alignment and repege marking if necessary etc. complete. Check survey including revision of profiles if required.
132 kV D/C "PA+3m (0-2dog)" Suspension Pole
132 kV D/C "PB+6m (2-15deg)" Tension Pole
"132 kV D/C ""PD+6m (30-60deg)"" Tension Pole "
"132 kV D/C ""PD+6m (90deg) Tension Pale with Auxiliary cross arm "
132 kV D/C "PD+9m (30-60deg)" Tension Pole
132 LV D/C "PD+9m (90deg)" Tension Pole with Auxiliary cross arm.
"132 kV D/C ""PA+3m (0-2deg) Suspension Pole "
"132 kV D/C ""PB+6m (2-15deg)"" Tension Pole "
"132 kV D/C ""PD+6m (30-60deg)"" Tension Pole "
132 kV D/C "PD+6m (30-60deg)" Tension Pole with Auxiliary cross
132 kV D/C "PD+9m (30-60deg) Tension Pole
132 kV D/C "PD+9m (90 deg) Tension Fole with Auxiliary cross
Inclusive of G.I. pipe and Gl strip/Flat & Nuts and bolts
Inclusive of G.I. Wire, lugs, nuts & bolts etc.
Sringing of ACCC HTLS Casablanca Conductor & OPGW Cable with its hardware & accessories & distringing of existing conductor with its hardware & accessories
Dismantling charges for Tower
Removal of stubs upto 1.5 mtr
A3-Supply of Material for Sub-Station work (Nandurbar TSS)
"132kV CB for 3P trip along with mechanism/accessories and support structure "
132 kV Motor operated Isolator with EB, along with insulator and with support structure
132 kV Motor operated Isolator without EB alongwith Insulators and with support structure
132 kV Metering CT
132 kV Metering PT
120kV LA alongwith power connecters and discharge Counter, Stn Class, 10KA, Porcelain Type insulator
132,100 kV feeder Control & Relay Panel
"Split unit type AC units requiring no ducting "
"Terminal Connector suitable for isolator palm (C15a) Electrolytic Copper, Single zebra conductor "
TC for CT/PT single stud to single Zebra (C10b), Electrolytic copper, compression type
"T-connector (C5) Single to single-Comp type"
"TC suitable for Falm of CB (C18) "
Earthing strips
Marshalling box
Marshalling box
2 core, 2.5 sq.mm
4 core. 2.5 sq.mm.
12 core, 2.5 sq.mm
19 core, 2.5 sq.mm
Structure + Foundation bolts
A4-Erection of Material for Sub-Station work (Nandurbar TSS)
"Service charges for Service Engineer for OEM "
Equipment support structure
Excavation of trench up to 600 mm Depth, laying of earthmat, welding and backfilling complete job
"220 kV/132-110-100 kV/33-22 kV Equipment/Gantry/support stracture earthing including excavation and backfilling, cutting, bending & drilling of M.S./GI flat & welding one end to earth mat and other end to equipment etc "
132,100 kV feeder Control & Relay Panel
PVC pipers for control cable connected between cable trench and various equipments
"Split type Alr conditioner without Duct-1.5 ton (Minimum 3 Star Rating) "
145 kV Circuit Breaker
Dismantling of 132,100 kV feeder Control & Relay Panel
Dismantling of 132kV Gantry
Dismantling of equipment structures
B1-Supply of Material for Transmission Line work (Nardana TSS)
132 kV D/C "PB+3m (2-15deg)" Tension Pole
132 kV D/C "PD+3m (30-60deg)" Tension Pole
132 kV D/C "PD+9m (30-60deg)" Tension Pole
132 kV D/C "PD+9m (90deg)" Tension Pole with Auxiliary cross arm.
a) Danger Board
"b) Number Plate "
c) Phase plates (Set of RYB)
"d)Circuit Plate (Set of C1 & C2) "
"e) Anti-climbing devices with Barbed wire. "
ACCC HTLS Casablanca Conductor (including 2.5% extra for sag and wastage
a) Mid Span Joints
b) Repair Sleeves
d) Vibration dampers
Fiber Optic Cable 48 Fibre
"OPGW Tension Assy Set with JB TENSION ASSEMBLY SET OF OPGW "
OPGW Tension Assy Set without JB TENSION ASSEMBLY SET OF OPGW
"OPGW Suspension Assy Set SUSPENSION ASSEMBLY SET OF OPGW "
48C (DWSM) OPGW 48 Core (DW5M) Optical Ground Wire
48C OPGW Joint Box 48 Core OPGW 2 way Joint Box
"OPGW Vibration Damper Vibration Damper for OPGW Wire HVDC "
"OPGW Down lead Clamps "
"a) 132 kV 70KN (N) Poroclain insulator String "
b) 132 kV 120KN (N) Porcelain insulator String
B2-Erection of Material for Transmission line work(Nardana TSS)
Detailed survey including tower spotting and tower profiles, Detailed survey with GPS, 1 Total station, Digital theodilite etc. along the approved alignment, preparation of profiles, tower spotting, tower schedules and soil resistivity, marking of route on topo sheet and village map, collection of 7/12 of corridor, identification of forest/hatching to mimimize the forest etc. and submission of KML files.
Check survey to carry out check survey as per approved profiles Digital 2 Theodalite/total station/GPS etc. and location marking by fixing three pegs in alignment for suspension tower and by fixing five pegs in bisection for angle tower including bush cutting along the centre line of alignment and repege marking if necessary etc. complete. Check survey including revision of profiles if required.
132 kV D/C "PB+3m (2-15deg)" Tension Pole
132 kV D/C "PD+3m (30-60deg)" Tension Pole
132 kV D/C "PD+9m (30-60deg)" Tension Pole
132 LV D/C "PD+9m (90deg)" Tension Pole with Auxiliary cross arm.
132kV D/C "PB+3m (2-15deg) Tension Pole
132 kV D/C "PD+3m (30-60deg)" Tension Pele
132 kV D/C "PD+9m (30-60deg) Tension Pole
132 kV D/C "PD+9m (90 deg) Tension Fole with Auxiliary cross
Inclusive of G.I. Wire, lugs, nuts & bolts etc.
Sringing of ACCC HTLS Casablanca Conductor & OPGW Cable with its hardware & accessories & distringing of existing conductor with its hardware & accessories
Dismantling charges for Tower
Removal of stubs upto 1.5 mtr
B3-Supply of Material for Sub-Station work (Nardana TSS)
"132kV CB for 3P trip along with mechanism/accessories and support structure "
132 kV Motor operated Isolator with EB, along with insulator and with support structure
132 kV Motor operated Isolator without EB alongwith Insulators and with support structure
132 kV Metering CT
132 kV Metering PT
120kV LA alongwith power connecters and discharge Counter, Stn Class, 10KA, Porcelain Type insulator
132,100 kV feeder Control & Relay Panel
"Split unit type AC units requiring no ducting "
"Terminal Connector suitable for isolator palm (C15a) Electrolytic Copper, Single zebra conductor "
TC for CT/PT single stud to single Zebra (C10b), Electrolytic copper, compression type
"T-connector (C5) Single to single-Comp type"
"TC suitable for Falm of CB (C18) "
Earthing strips
Marshalling box
Marshalling box
2 core, 2.5 sq.mm
4 core. 2.5 sq.mm.
12 core, 2.5 sq.mm
19 core, 2.5 sq.mm
Structure + Foundation bolts
B4-Erection of Material for Sub-Station work (Nardana TSS)
"Service charges for Service Engineer for OEM "
Equipment support structure
Excavation of trench up to 600 mm Depth, laying of earthmat, welding and backfilling complete job
"220 kV/132-110-100 kV/33-22 kV Equipment/Gantry/support stracture earthing including excavation and backfilling, cutting, bending & drilling of M.S./GI flat & welding one end to earth mat and other end to equipment etc "
132,100 kV feeder Control & Relay Panel
PVC pipers for control cable connected between cable trench and various equipments
"Split type Alr conditioner without Duct-1.5 ton (Minimum 3 Star Rating) "
145 kV Circuit Breaker
Dismantling of 132,100 kV feeder Control & Relay Panel
Dismantling of 132kV Gantry
Dismantling of equipment structures
C1-Supply of Material for Transmission Line work (Dharangaon TSS)
132 kV D/C "PA+3m (0-2deg)" Suspension Pole
"132 kV D/C ""PA+6m (0-2deg)"" Suspension Pole "
132 kV D/C "PB+3m (2-15deg)" Tension Pole
132 kV D/C "PD+0m (30-60deg)" Tension Pole
132 kV D/C "PD+6m (30-60deg)" Tension Pole
a) Danger Board
"b) Number Plate "
c) Phase plates (Set of RYB)
"d)Circuit Plate (Set of C1 & C2) "
"e) Anti-climbing devices with Barbed wire. "
"a) 132 kV 70KN (N) Poroclain insulator String "
b) 132 kV 120KN (N) Porcelain insulator String
ACCC HTLS Casablanca Conductor (including 2.5% extra for sag and wastage
a) Mid Span Joints
b) Repair Sleeves
d) Vibration dampers
Fiber Optic Cable 48 Fibre
"OPGW Tension Assy Set with JB TENSION ASSEMBLY SET OF OPGW "
OPGW Tension Assy Set without JB TENSION ASSEMBLY SET OF OPGW
"OPGW Suspension Assy Set SUSPENSION ASSEMBLY SET OF OPGW "
48C (DWSM) OPGW 48 Core (DW5M) Optical Ground Wire
48C OPGW Joint Box 48 Core OPGW 2 way Joint Box
"OPGW Vibration Damper Vibration Damper for OPGW Wire HVDC "
"OPGW Down lead Clamps "
C2-Erection of Material for Transmission Line work (Dharangaon
Detailed survey including tower spotting and tower profiles, Detailed survey with GPS, 1 Total station, Digital theodilite etc. along the approved alignment, preparation of profiles, tower spotting, tower schedules and soil resistivity, marking of route on topo sheet and village map, collection of 7/12 of corridor, identification of forest/hatching to mimimize the forest etc. and submission of KML files.
Check survey to carry out check survey as per approved profiles Digital 2 Theodalite/total station/GPS etc. and location marking by fixing three pegs in alignment for suspension tower and by fixing five pegs in bisection for angle tower including bush cutting along the centre line of alignment and repege marking if necessary etc. complete. Check survey including revision of profiles if required.
132 kV D/C "PA+3m (0-2dog)" Suspension Pole
132 kV D/C PA+6m (0-2deg)" Suspension Pole
132 kV D/C "PB+3m (2-15deg)" Tension Pole
"132 kV D/C ""PD+0m (30-60deg)"" Tension Pole "
"132 kV D/C ""PD+6m (30-60deg)"" Tension Pole "
"132 kV D/C ""PA+3m (0-2deg) Suspension Pole "
132 kV D/C "PA+6m (0-2deg)" Suspension Pole
132kV D/C "PB+3m (2-15deg) Tension Pole
132 kV D/C "PD+0m (30-60deg)" Tension Pole
"132 kV D/C ""PD+6m (30-60deg)"" Tension Pole "
Inclusive of G.I. pipe and Gl strip/Flat & Nuts and bolts
Inclusive of G. I. Wire, lugs, nuts & bolts etc.
Sringing of ACCC HTLS Casablanca Conductor & OPGW Cable with its hardware & accessories & distringing of existing conductor with its hardware & accessories
Dismantling charges for Tower
Removal of stubs upto 1.5 mtr
C3-Supply of Material for Sub-Station work (Dharangaon TSS)
"132kV CB for 3P trip along with mechanism/accessories and support structure "
132 kV Motor operated Isolator with EB, along with insulator and with support structure
132 kV Motor operated Isolator without EB alongwith Insulators and with support structure
132 kV Metering CT
132 kV Metering PT
120kV LA alongwith power connecters and discharge Counter, Stn Class, 10KA, Porcelain Type insulator
132,100 kV feeder Control & Relay Panel
"Split unit type AC units requiring no ducting "
"Terminal Connector suitable for isolator palm (C15a) Electrolytic Copper, Single zebra conductor "
TC for CT/PT single stud to single Zebra (C10b), Electrolytic copper, compression type
"T-connector (C5) Single to single-Comp type"
"TC suitable for Falm of CB (C18) "
Earthing strips
Marshalling box
Marshalling box
2 core, 2.5 sq.mm
4 core. 2.5 sq.mm.
12 core, 2.5 sq.mm
19 core, 2.5 sq.mm
Structure + Foundation bolts
C4-Erection of Material for Sub-Station work (Dharangaon TSS)
"Service charges for Service Engineer for OEM "
Equipment support structure
Excavation of trench up to 600 mm Depth, laying of earthmat, welding and backfilling complete job
"220 kV/132-110-100 kV/33-22 kV Equipment/Gantry/support stracture earthing including excavation and backfilling, cutting, bending & drilling of M.S./GI flat & welding one end to earth mat and other end to equipment etc "
132,100 kV feeder Control & Relay Panel
PVC pipers for control cable connected between cable trench and various equipments
"Split type Alr conditioner without Duct-1.5 ton (Minimum 3 Star Rating) "
145 kV Circuit Breaker
Dismantling of 132,100 kV feeder Control & Relay Panel
Dismantling of 132kV Gantry
Dismantling of equipment structures
Download all tender documents and submit your bid