Dronasagar Lake Redevelopment, Kashipur (U.S. Nagar)

Amount

Supply and installation of Eco Straight Slide (All for complete work )

Supply and installation of Roller Slide.(All for complete work )

Supply and installation of Spiral Slide.(All for complete work )

Supply and installation of Tube Slide. (All for complete work )

Supply and installation of Double Swing (All for complete work )

Supply and installation of Double Sea-Saw. (All for complete work )

Supply and installation of Chair Merry Go Round(All for complete work )

Supply and installation of Deluxe Merry Go Round.(All for complete work )

Supply and installation of Multi Play Station. (All for complete work )

Fiber reinfored mural work (All for complete work )

Guru Dronacharya Statue 12 ft

Mahabharat Related Statue 6 ft

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) copper cables 3C2.5 sq.mm.CU armoured

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) copper cables 3C4.0 sq.mm.CU armoured

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) copper cables 3C6.0 sq.mm.CU armoured

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) copper cables 4C6.0 sq.mm.CU armoured

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) Aluminium Cables 3.5c50sq.mm.(Al)

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) Aluminium Cables 3.5C 70sq.mm.(Al)

Supplying of all materials for terminations of1.1 KV grade copper/aluminiumcable of the following suizes.the work includes cable glanding using brass plated double compression glands,sizing thecoreleads,removing nsulation fixing suitable crimpring type copper lugs/thimbles by using hydraulic crimping tools with correct size of the dies,shaping the leads neatly connection the same to the terminals. Power Cable3C2.5 sq.mm.CU armoured

Supplying of all materials for terminations of1.1 KV grade copper/aluminiumcable of the following suizes.the work includes cable glanding using brass plated double compression glands,sizing thecoreleads,removing nsulation fixing suitable crimpring type copper lugs/thimbles by using hydraulic crimping tools with correct size of the dies,shaping the leads neatly connection the same to the terminals. Power Cable 3C4.0 sq.mm.CU armoured

Supplying of all materials for terminations of1.1 KV grade copper/aluminiumcable of the following suizes.the work includes cable glanding using brass plated double compression glands,sizing thecoreleads,removing nsulation fixing suitable crimpring type copper lugs/thimbles by using hydraulic crimping tools with correct size of the dies,shaping the leads neatly connection the same to the terminals. Power Cable 3C6.0 sq.mm.CU armoured

Supplying of all materials for terminations of1.1 KV grade copper/aluminiumcable of the following suizes.the work includes cable glanding using brass plated double compression glands,sizing thecoreleads,removing nsulation fixing suitable crimpring type copper lugs/thimbles by using hydraulic crimping tools with correct size of the dies,shaping the leads neatly connection the same to the terminals. Power Cable 4 C6.0 sq.mm.CU armoured

Supply, installation, testing and commissioning of following bollard light fixtures along with all harwares, control gears as per the light type and system : Type of light : Bollard light MOC : Aluminium die cast Diffuser : Diffused light Wattage : 12W LED apx as per the lumen package IP - rating IP- 65 outdoors installations Dimensions of the fixtures : 175dia and 750mm high Lamp type and wattage LED - 12W apx to meet the total luman package Lumen out put Minimum : 100 Lumens/per watt and total Lumen package of 1200Lumens minimum for the fixxture Lamp life : L-70 Minimum : 50000 hours CRI Not less than 80Color temperature3000K Make : LegeroCat. No. : LBT - 7012 Light fixtures as described above

Supply, , testing and commissioning of surface mounted covered light fixtures as per details below : MS body frame with radiant surface Optics Ploycarbonate diffusers Fixture type Surface mounted fixtrue Fixture color white IP - rating IP- 40 indoor instalaltions Dimensions of the fixtures 150diax105 Height apx .dimensions Lamp type and wattage LED - 12W, Lumen out put Minimum : 100 Lumens/per watt and total Lumen package of 1200Lumens Lamp life : l-70 Minimum : 50000 hours CRI Not less than 70 Color temperature 5500K cool white Recommended fixture to meet the above requirements Make : Legero Cat. No. : LVS - 6512 Light fixtures as described above

Supply, installation, testing and commissioning of post top lantern as per detials below LED Decorative Street Lantern, aluminium die cast painted frame, sealed onto the body to achieve separate IP 65 optical & IP 65 control gear compartments having better thermal dissipation, Dimensions of the fixtures 450diax680 Height apx .dimensions Lamp type and wattage LED - 45W, Lumen out put Minimum : 100 Lumens/per watt and total Lumen package of 4500Lumens Lamp life : l-70 Minimum : 50000 hours CRI Not less than 70 Pole Aluminium die cast 3.5M high pole Color temperature4000K cool white Recommended fixture to meet the above requirements Make : Legero Cat. No. : LPB - 4045

Light fixtures as described above Cat. No. : LPB - 4045 as above but with 1M POLE Light fixtures as described above

Supply, installation, testing and commissioning of spike uplighter outdoor fitting as per detials below: Material of construction : Aluminium die cast body frame with radiant surface Optics 12 degree beam lense Screen None Dimming None Fixture type Spike focus light Control Gear Integral type Fixture color Black IP - rating IP- 66 outdoor installations Dimensions of the fixtures 75diax138 length apx . dimensions Lamp type and wattage LED - 10W Maximum system wattage allowed Lumen out put Minimum : 80 Lumens/per watt and total Lumen package of 800Lumens Lamp life : l-70 Minimum : 50000 hours CRI Not less than 70 Color temperature 3000K warm Recommended fixture to meet the above requirements Make : LEGERO Cat. No. : LSO - 3010 Light fixtures as described above

Supply, installation, testing and commissioning of street light fixtures as per detials below Type : Street light fixtures IP-66 Fixture shape : Street light Lamp : 90W LED Linear source Color temperature : 6000K CRI : Not less than 80 Lumen out put : Not less than 100lumens /W having total lumnes not less than 9000lumens Lamp life - L70 minimum 50000 hours CRI Not less than 70 Color temperature 6000K warm Recommended fixture to meet the above requirements Make : LEGERO Cat. No. : LRS - 99090 Light fixtures as described above

Supply, installation, testing and commissioning of Linear light fixtures as per detials below: Type : Linear Led Light Batten Fixture shape : Rectangular Lamp : 20W LED Linear source Color temperature : 4000K CRI : Not less than 80 Lumen out put : Not less than 80lumens /W having total lumnes not less than 1600lumens Lamp life - L70 minimum 50000 hours CRI Not less than 70 Color temperature Recommended fixture to meet the above requirements Make : LEGERO Cat. No. : LBJ - 100 00 20 Light fixtures as described above

Supply, installation, testing and commissioning of Track and track light fixtures as per details below: Type : Tracklighting system Fixture shape : Circular Lamp : 20W LED Color temperature : 3000K CRI : Not less than 80 Lumen out put : Not less than 80lumens /W having total lumnes not less than 1600lumens Lamp life - L70 minimum 50000 hours CRI Not less than 70 Color temperature Recommended fixture to meet the above requirements Make : LEGEROTrack 1m with suspension kits Cat. No. : TACT - 1001

Supply, installation, testing and commissioning of Track and track light fixtures as per details below: Type : Tracklighting system Fixture shape : Circular Lamp : 20W LED Color temperature : 3000K CRI : Not less than 80 Lumen out put : Not less than 80lumens /W having total lumnes not less than 1600lumens Lamp life - L70 minimum 50000 hours CRI Not less than 70 Color temperature Recommended fixture to meet the above requirements Make : LEGERO Track lights Cat. No. : LAU - 0020

Supply and fixing of 8.5M high poles, octagonal, hot dip galvanised, service access door with terminal and SP MCB and earthing terminal, with single arm 1.5M long with flange plate to mount on concrete foundation through bolts in precast foundation. 8.5M high pole with base plate and foundation, foundation bolts etc. complete as required. a Single 1.5m Long arm

Supply and fixing of 8.5M high poles, octagonal, hot dip galvanised, service access door with terminal and SP MCB and earthing terminal, with single arm 1.5M long with flange plate to mount on concrete foundation through bolts in precast foundation. 8.5M high pole with base plate and foundation, foundation bolts etc. complete as required. a Double 1.5 M long arm

Supply, laying and terminating 3C2.5 flexible double sheathed flexible copper conductor cable

Supply, laying and terminating 2C1.5Sqmm flexible twin twisted shielded sheathed flexible copper conductor cable

Supply, installation and testing the 100x100x60mm (nominal size, may vary slightly from make to make) deep loop-in loop-out junction box made of Engineering plastic including providing and fixing 3 nos. 4way 6 sq.mm screwless terminal blocks for connecting cables. The degree of protection of the box shall be IP-55 as per IS:2147. The box shall be complete in all respects including providing two nos. PVC cable glands for flexible cords as per standard detail.

Supply of following heavy duty exhaust fan suitable for 230V single phase 50Hz AC supply system complete with louvers etc.as required. 230mm dia

Supply of following heavy duty exhaust fan suitable for 230V single phase 50Hz AC supply system complete with louvers etc.as required. 300mm dia

Supply of 1400mm dia sweep ceiling fans complete with capacitor, down rod, termonal blocks, wiring the down rod, testing, commissioning etc.as required.

Providing, Fixing, testing & commissioning Health faucet in PVC Flexible Tube with wall hook. (Spray unit, Flexible Hose and cructh will be supplied.) : a) one Number PVC flexible tube of 1.2 m length fitted with wall flange.; b) Hand operated spray unit (instant type).

Providing, Fixing, testing and commissioning of CP brass wall mounted swan neck sink mixer with wall flange and swinging casted spout complete as required and making good the walls wherever required.

Providing and fixing, testing and commissioning of reducing floor drain of 110x63 mm OD as floor drain in cement concrete 1 : 2 : 4 float with floor complete in all respects.

Providing and fixing 125 mm dia, Stainless steel grating with frame for floor traps or drains of required pattern with 25 dia waste hole for basin & sink flexible waste pipe or without hole as/site requirement including cutting and making good the floors complete. 125 mm dia.

Providing and fixing, testing and commissioning of uPVC multi angle inlet hight riser fittings with 3 or 4 side inlets of 40/ 50/63 mm size and fixed to CI traps with drip seal/m seal/solvent cement joint complete in all respect.

Providing, fixing, jointing and testing of uPVC pipes conforming to IS 4985 including injection moulded fittings with bosses like bends, tees, adoptors etc. suitable for rubber ring jointing complete including fixing to walls with clamps and hanging from ceiling to grade on adjustable supports. 32 mm dia, class V (10 kg/cm2)

Providing, fixing, jointing and testing of uPVC pipes conforming to IS 4985 including injection moulded fittings with bosses like bends, tees, adoptors etc. suitable for rubber ring jointing complete including fixing to walls with clamps and hanging from ceiling to grade on adjustable supports. 50 mm dia, class V (10 kg/cm2)

Providing, fixing, testing & commisioning of full bore brass ball valve with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete:in all respects (PN 1.6). Tested to 25 kg/cm2 hyd. 15 mm dia

Providing, fixing, testing & commisioning of full bore brass ball valve with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete:in all respects (PN 1.6). Tested to 25 kg/cm2 hyd. 20 mm dia

Providing, fixing, testing & commisioning of full bore brass ball valve with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete:in all respects (PN 1.6). Tested to 25 kg/cm2 hyd. 25 mm dia

Providing and Fixing of low noise Concealed Flush Mechanism for WC with low pressure with internal isolating valve including roughing -in-set for mechanical actuation (Comrises Plastic Shell Casing; preassembled water path out of DR brass; Isolating valve/Connection G 1" external thread, right; Flow through plug G 3/4 " external thread;cleaning cover; height adjustable flush pipe with construction plug ; flow pressure: 0,8 to 2,5 bar flush volume: 1,4 l/s at min. 0,8 bar flow pressure fitting connection: DN 25 G 1 external thread right and Design control button (Front panel out of plastic chrome) for two flush volume - (Economy button- 3 l and main flush volume adjustable between 4.5 to 6 l) inclusive self closing catridge with automatic jet cleaning needle Noise Class -I ; Material : all parts conducting water out of dezincification - resistant water ( Model no. 01 137 00 99 with 02 814 06 99 of Schell ) Flush volume regulation by means of power plate (pre-assembled) Material: front panel stainless steel Stainless steel, PU 1 Make : Schell STAINLESS STEEL manual flush valve Plate Model no. 01 137 00 99 with 02 814 06 99 of Schell

Providing, Laying, Jointing and Testing of HDPE Pipes and Fittings. The work shall be done as per specifications and in general shall include: a) Providing HDPE pipes (of PE 80 grade as per IS 4984-1995 ). The pipes shall have a working pressure of PN 10. b) Providing fabricated and moulded fittings of same or higher grade and upto 63 mm OD shall be rated PN 16 and 75 mm OD and above shall be rated for PN 10. Providing, laying and fixing HDPE compression type fittings (as required, adaptor fittings, saddles, etc. including jointing, testing etc. all complete. The compression fittings upto 63 mm OD shall be rated PN 16 and 75 mm OD and above shall be rated for PN 10. c) Excavation of trenches and refilling including thrust blocks d) Laying in position in excavated trenches. e) Jointing by heat fusion technique. f) Encasing the laid pipe with river sand of grading zone V or coarser, 150 mm all around. f) Providing and laying LDPE/PVC warning tape ( in florescent colour) of size 25 mm wide and 50 micron thick. The warning tape shall be laid 150 mm above the pipe crown. 110 mm dia. ( PN 10 )

Providing, Laying, Jointing and Testing of HDPE Pipes and Fittings. The work shall be done as per specifications and in general shall include: a) Providing HDPE pipes (of PE 80 grade as per IS 4984-1995 ). The pipes shall have a working pressure of PN 10. b) Providing fabricated and moulded fittings of same or higher grade and upto 63 mm OD shall be rated PN 16 and 75 mm OD and above shall be rated for PN 10. Providing, laying and fixing HDPE compression type fittings (as required, adaptor fittings, saddles, etc. including jointing, testing etc. all complete. The compression fittings upto 63 mm OD shall be rated PN 16 and 75 mm OD and above shall be rated for PN 10. c) Excavation of trenches and refilling including thrust blocks d) Laying in position in excavated trenches. e) Jointing by heat fusion technique. f) Encasing the laid pipe with river sand of grading zone V or coarser, 150 mm all around. f) Providing and laying LDPE/PVC warning tape ( in florescent colour) of size 25 mm wide and 50 micron thick. The warning tape shall be laid 150 mm above the pipe crown. 32 mm dia. ( PN 10 )

Providing and fixing Cast Iron butterfly valve as per IS: 13095 of Class PN 10, having epoxy coated disc, carbon steel shaft, EPDM / nitrile rubber field replacible body lining and of approved make. including a set of MS flanges, required nos. of nut & bolts all complete. a) 100 mm dia

Providing and fixing Cast Iron butterfly valve as per IS: 13095 of Class PN 10, having epoxy coated disc, carbon steel shaft, EPDM / nitrile rubber field replacible body lining and of approved make. including a set of MS flanges, required nos. of nut & bolts all complete. b) Valve chamber 600x600x750

Providing and fixing of nickel plated brass/ nonferrous alloy fullyway ball valve ( minimum working pressure of 20 bar ) with operating handle of approved make. a) 32 mm dia

Providing, installing and commissioning 20 mm dia brass quick release coupling valves, complete with lid, preassembled triple swing joint in PVC, GI support rod with SS hose clamps all complete as per standard detail including making connections with main supply line.

Supply of Quick Coupling Keys complete with Swivel elbow complete

Providing and installing HDPE Valve Boxes with screw down type covers, of following sizes and shape, including excavation and filling of pea gravel in 100 mm deep layer at bottoms, all as per standared detail ( for QRCV, Ball Valves, Butterfly Valves, Flush points etc.) a) 150 mm dia- Circular

Providing and installing HDPE Valve Boxes with screw down type covers, of following sizes and shape, including excavation and filling of pea gravel in 100 mm deep layer at bottoms, all as per standared detail ( for QRCV, Ball Valves, Butterfly Valves, Flush points etc.) b) 375X300 mm - Rectanguler

Bidder Name

Amount

parkash chandra pandey(GSTN-05AAWPP8200D2ZN)

Ratan Construction(GSTN-05ADZPD7988A1Z4)

MAHENDRA SINGH BORA(GSTN-05AHKPB0396H1ZJ)

MAHENDRA SINGH BORA

parkash chandra pandey

MAHENDRA SINGH BORA

parkash chandra pandey