Loading
Loading…
Loading…
Tender Value
₹14.2 L
EMD Value
₹42,800
Closing Date
13 Aug 2026, 1:00 pm
Ex. Engineer JSD PHE GWD Srinagar
Ex. Engineer JSD PHE GWD Srinagar, Bagi Ali Ali Marardan Khan Nowshera Srinagar
Construction of 200 mm dia Production well at by DTH/ODEX method of drilling at Wullarhama (Wullarhama, Dachnipora in District Anantnag).
2026_PHE_317802_2
e-NIT No 38 of 2026-27
Open Tender
Drilling Works
Percentage
45 days
(Wullarhama, Dachnipora in District Anantnag).
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
Ex. Engineer JSD PHE GWD Srinagar
₹42,800
Yes
25 Jul 2026
25 Jul 2026
14 Aug 2026
25 Jul 2026
13 Aug 2026
25 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Boring/drilling of bore well of required dia and simultaneous lowering of casing/strainer by DTH/ODEX method prescribed in IS: 2800 (part-I), by fixing case drive shoe including collecting samples from different strata chart/bore log, including hire and running charges of all equipment tools, plants and machineries required for the job, all complete as per dicrection of Engineer-in-charge beyond 90m depth below ground.
All kinds of starta (Diameter of casing/stariner pipe = 200mm) | 90 | Mtr | 7,400 | ₹6,66,000 |
| 2 | Boring/drilling of bore well of required dia and simultaneous lowering of casing/strainer by DTH/ODEX method prescribed in IS: 2800 (part-I), by fixing case drive shoe including collecting samples from different strata chart/bore log, including hire and running charges of all equipment tools, plants and machineries required for the job, all complete as per dicrection of Engineer-in-charge beyond 90m depth and upto 150m depth below ground level.
All kinds of starta (Diameter of casing/stariner pipe = 200mm) | 10 | Mtr | 7,800 | ₹78,000 |
| 3 | Supplying and assembling in bore well, ERW (Electric resistance welded) Fe 410 mild steel, screwed and socketed/plain ended casing pipes of required dia, confirming IS: 4270 of reputed and approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture including required hire and labor charges, fitting and accessories, all complete for all depths as per direction of Engineer-in-charge 200mm nominal dia. having wall thickness of 7.1 mm (as per IS code). | 100 | Mtr | 5,600 | ₹5,60,000 |
| 4 | Development of tube well in accordance with IS: 2800 (part-I) and IS: 11189 to establish maximum rate of uasble water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by V -notch method or any other approved method, measuring static level and draw down etc. by step draw down method, collecting water samples and getting tested in approved laboratory, i/c disinfection of tube well, all complete including required hire and labour charges of air compressor, tools and accessories etc. all as per direction of Engineer in-charge. | 1 | Job | 1,20,000 | ₹1,20,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.15 MB
BOQ_1043503.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].