SHORT PRESS NIT NO.19, ITEM NO.01(2019-20)CWA (W and S)-I

Cooling Cabinet: 12 cu.ft , 340 litre Inside chamber made of stainless steel 304 grade and outer chamber mild steel duly painted or S.S. 304. Temperature range 0 to 25oC & controlled by digital temperature indicator cum controller. Provided with adjustable shelves • Inner chamber : Made of S.S.304 grade • Outer Chamber : Made of Mild Steel duly painted or S.S. 304 • Compressor : Kirloskar/Danfoss/ISI Marked ( 05 yr warranty) • Insulation : Puff Insulation • Controller : P.I.D. based digital temperature indicator cum controller • Temp. Range : 0°C to 25°C • Temp. Accuracy : ± 1°C • Refrigerant : CFC Free • Power supply : 220 V, 50 Hz, Single Phase AC supply Inside made of S.S. 304 & outside made of Mild Steel duly painted

Vertical Autoclave : 750 x 550 (30”x 22”) High Pressure Vertical Autoclave (Triple walled) Sterilization – Semi Automatic • For Dry Sterilization. • Digital display of temperature and timer. • Inner chamber, outer wall, boiler & steam jacket are made of S. S. 304 grade. • Middle Chamber : Stainless Steel 304 • Lid : Stainless steel 304 • Radial Locking system : Made of steel bars • Accessories included: 1) Automatic pressure control switch (APC) 2)Automatic Low water cut off arrangement (ALW) 3) Vacuum Breaker 4) Pressure Gauge 5) Water level indicator 6) Safety Valve 7) Steam Release Valve 8) Paddle lifting Device 9) S. S. Basket Special Features 1) Single panel feather touch LED microprocessor controller 2) Simultaneous display of temperature & time. 3) Timer starts automatically as soon as the set temperature is attained & stop the cycle automatically as soon the time is over. 4) The steam is to be released manually.

LABORATORY INCUBATOR : 605 x 910 x 605 (24”x36”x18”) 336 litres Triple wall construction. Fully Automatic High Precision Fitted with air circulating fan which circulate the hot air in between inner chamber & insulation through one path between inner chamber & middle chamber which minimizes the loss of heat & temperature variation at any point inside the chamber & make it Perfect System. Construction Inside Chamber : S. S. 304 grade Middle Chamber : Made of G. I. Sheet. Outside Chamber : Made of Mild Steel/ G. I. sheet duly painted. Temperature Controller : Door mounted digital Door : Single Door with glass window. Timer : Digital, automatic, inbuilt Shelves : Strong stainless steel wire shelves. Ventilation : Provided on both side. Gasket : Door gasket made of silicon/synthetic rubber. Temperature range : Ambient to 70˚C Accuracy : ± 0.5˚C or better (at 37°C) Readability : 0.5˚C Power Supply : 220 V, Single phase, 50 Hz, AC supply Special Features • Controller mounted on the door (no separate panel) • Feather Touch LED +LCD both display with Digital Timer • Once the set temperature is attained, timer starts working automatically • Raise alarm if the temperature overshoot/undershoot • Continuous display on L. C. D. of Set Temp., Attained Temp., Set Time, Heating On/Off. • Display of Door open (if door is not closed) & heater gets switched off automatically. • Indicator of Auto-mode, Sensor failure (in case of sensor failure) • 70% higher use through trouble free adjustment of trays anywhere at a gap 4cms

B.O.D. Cooling Incubator with Suitable Voltage Stabilizer (1020 x 620 x 520 for 340 Ltrs) Digitally Controlled Microprocessor Based Automatic (Low Temperature Incubator) Double walled. • Inner chamber : Made of S.S.304 grade • Outer Chamber : Made of Mild Steel duly painted or S.S. 304 • Inside Door : Fitted with unbreakable transparent acrylic • Outer Door : Thick, insulated, powder coated • Compressor : Fitted with standard make Kirloskar / Shriram • Circulating Fan : 2 Nos. fitted inside the chamber • Shelf : 3 Nos. made of SS wire. The trays can be adjusted anywhere at a distance of 4cms. • Working Temp. : 5°C to 50°C or 10°C to 50°C when lights are ON. • Temp. Accuracy : ± 1°C (or 0.5°C under ideal conditions) • Temp. Readability: 0.1°C • Power supply : 220 V, 50 Hz, Single Phase AC supply Salient Feature 1. Feather touch controller, plate mounted on the door with Digital Display L.E.D + L.C.D. Both 2. Port for computer interface (optional) 3. Continues display of set temperature, attained temperature, time, day, date, etc 4. As soon as the set temperature is attained, timer starts automatically & raise the alarm after the set time is over (Fully automatic). 5. LED Indicator for Door Open , power failure, sensor failure 6. Battery operated controller with indication of power failure (optional) 7. 70% higher uses through trouble free adjustment of trays anywhere at a gap 4cms

Axiva Sichem Biotech