ADDN/ ALTN TO DUCT PORTION OF BLDG NO A BLOCK AND C-10 AT VSN CHILODA, PROVN OF BUS STOP STAND AT HQ SWAC VSN CHILODA AND ADDN/ALTN TO BLDG NO. P-14 AT VSN CHILODA UNDER GE (AF) CHILODA

Amount

Cutting holes exc 150 Sqcm & not exc 400 sqcm superfacial area into through reinforced cement concrete slabs, chajjas, wall, column, beam etc. or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed. Note :- Work to be carried out in multy storey bldgs upto 10 storey and necessary steel scafolding shall be included in the rate.

Demolition of brick work or stone boulder masonary/ jaffri wall built in cement mortar including all quoins arches pillars etc. including ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. Note :- Work to be carried out in multy storey bldgs upto 10 storey and necessary steel scafolding shall be included in the rate.

Dismantling cast iron or mild steel work of any description not otherwise provided for complete all as specified and directed. Note :- Work to be carried out in multy storey bldgs upto 10 storey and necessary steel scafolding shall be included in the rate.

Supply, fabrication and fixing of framed work such as grills, gratings,angles etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or landing platform and similar work conforming to Fe.290.Gde-E-165. Thickness of metal to be welded exc 6mm but not exc 10mm and length of welding not less than 5cm complete all as specified and directed. (MS ladder and framed work to be fixed in high rise buildings upto 10 storey) Note :- Necessary steel scafolding shall be included in the rate.

S&F iron pintle hinges for MS foldable platform of size 100MM heavy duty complete all as specified and directed. Note :- Work to be carried out in multy storey bldgs upto 10 storey and necessary steel scafolding shall be included in the rate.

S&F Hold fastner stay of dia 16MM and 150MM long to be fixed in RCC Column/Beams complete all as specified and directed. Note :- Work to be carried out in multy storey bldgs upto 10 storey and necessary steel scafolding shall be included in the rate.

M&L for Preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome primer complete all as specified as directed. Note :- Work to be carried out in multy storey bldgs upto 10 storey and necessary steel scafolding shall be included in the rate.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) mixed with WPC finished the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- Work to be carried out in multy storey bldgs upto 10 storey and necessary steel scafolding shall be included in the rate.

M&L for preparation of newly plastered surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. Note :- Work to be carried out in multy storey bldgs upto 10 storey and necessary steel scafolding shall be included in the rate.

M&L for preparation of old plastered surface of wall and applying one or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and directed. Note :- Work to be carried out in multy storey bldgs upto 10 storey and necessary steel scafolding shall be included in the rate.

M & L for Cement concrete in foundations, filling and mass concrete, Type B-2, 1:2:4 (40mm graded aggregate) complete all as specified and directed.

S&F and fabrication steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. Note :- Work to be carried out in multy storey bldgs upto 10 storey and necessary steel scafolding shall be included in the rate.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. Note :- Work to be carried out in multy storey bldgs upto 10 storey and necessary steel scafolding shall be included in the rate.

Removing/cleaning vegitation/weed and small plants from external wall surface of high rise buildings and making good the broken surface with CM 1:4 complete all as specified and directed. Note :- Necessary steel scafolding shall be included in the rate.

Excavation over areas not exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manhole, pier holes, etc. n exc 10 Sqm on plan and n exc 1.50m in depth and getting out in Soft / loss soil complete all as specified and directed.

M&L for plain cement concrete type D-2 1:4:8 (using 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for RCC Type B1 1:2:4 (20 mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

M & L for Surfaces excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified and directed.

M & L for Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Material and Labour for Hardcore of broken stones of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and Labour for 100mm thick Cement concrete 1:4:8 type D2 complete all as specified and directed.

Supply and fix 24 mm dia mild steel blots , purpose made , with hexagonal or square head one end and screwed for other , or screwed for both ends , each screwed to be fitted with washer and one hexagonal or square length not exc 300mm long complete all as specified and directed.

Material and labour for mild steel plain plates of reqired thickness Fe 410 -W (Gde- E- 250) quality- A , cut to size or shape required as in base plate or gusset plate weld in position complete all as specified and directed.

Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for 12 mm thick multiwall polycarbonate sheet as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for 2mm thick perforated GI sheet for wall cladding or horizontal surfaces, fixing with screws or welding having open area of 33% complete all as specified and directed. Note:- Pattern of perforation as directed by GE and as per sample kept in GE office.

M & L for parking tiles 400x400x12mm thick of approved shade and colour , set jointed in neat cement slurry complete all as specified as directed with Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM1:6 complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment with 25 mm thickness sand cushioning including spreading in layers complete all as specified and directed.

M&L Factory made for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for prepartion of new concrete surface of any description over 10cm girth or width, not otherwise described applying two coats of synthatic enamel paint over a coat of primer complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for cement concrete type 1:2:4, B0 using 12.5mm stone aggregate as in filleting work and like complete all as specified and directed.

Material and labour for providing cabinet and cubboard in required sizes at site made out of 18mm thick PVC sheet (prelam) having one side decorative laminated sheet (for shutter, sides of cabinet, partition and shelves etc). All the edges of shutter and front exposed edge of partition/shelves shall be covered with 2mm thick edge bonding tape as per manufacturer complete all as specified and as directed by Engineer-in-charge. Note :- (i) The area of each sheet (shutter, sides of cabinet, partition and shelves) shall be measured in sqm for payment. (ii) Magnetic catcher, handles, soft closing hinges and PVC frame (where required) shall be measured and paid separately under appropriate item of BOQ. (iii) Any other material required for making/fixing/hanging of cabinet shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.

S&F Stainless steel tower bolt 'L' Type 75mm long fency type heavy duty complete all as specified and directed by Engineer - in - Charge.

S&F stainless steel handles of size 75mm fency type heavy duty complete all as specified and directed by Engineer - in - Charge.

Supply and fixing Magnetic catcher fixed with steel screw complete all as specified and as directed by Engineer-in-charge.

S & F auto hinges (zero degree or eight degree) for cupboards as approved by GE.

S & F multipurpose drawer lock heavy duty for cupboard as approved by GE.

UMA CONSTRUCTION (BID ID -3189390)

Haritwal traders (BID ID -3190485)

ARTI CONSTRUCTION (BID ID -3189548)

divyarsh entrprise (BID ID -3189600)

Abhishek Enterprises (BID ID -3190217)

Ramdev and Sons (BID ID -3189542)

Shree Builders (BID ID -3189672)

Dighard Electricals (BID ID -3189688)