WBPWD/EE/N24/EL/e-NIQ- 166/25-26

PART -- A ( E.I. WORK ) SUB HEAD 1-- DISTRIBUTION WIRING Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. -- Average Run -- 8 Mtr. [ 2(a)/(iii)/E-9 ]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish On Board [ 4(a)/(i)/E-10 ]

SUB-HEAD 2-- PLUGS & SOCKETS Supplying & Fixing CRC sheet metal (16 SWG) JB-cumSwitch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall as per GS. -- -- 240 mm. x 200 mm. x 65 mm. [ 10(d)/E-4 ] [ S.P.B. ]

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover as per GS.-- [ 14(a)/E-5 ] [ S.P.B. ]

Supply & Fixing 240 V, 6 A plug socket (Brand approved by EIC), without plug top and switch, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections as per GS.-- [ 15(a)/E-5 ] [ S.P.B. ]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick as per GS. [ 22/E-6 ] [ 16 A D.P.P. ]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick as per GS. [ 26/E-7 ] [ ComB ]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall as per GS. -- [ 5(a)/E-17 ] [ For AC Pt. ]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate as per GS. -- [ 17/E-19 ] [ For AC Pt. ]

S & F AC Machine Timer Control Box fixed on wall fabricated with Double door ( 2 + 10 ) Way SPNDB enclosure as per -- ( Make - L&T, Cat no - LTSD12N ) incl. interconnection with suitable size of PVC insulated copper wire incl. Socketting with Copper socket with required size and following accessories -- i) 240/415 V, 32 A DP MCB of Breaking Capacity 10 KA & ''C'' Charecteristics ( Make - L&T ) - 1 nos. ii) 22A 2 Pole Power Contactor with 220 coil voltage ( Make -L&T, MNX - 22 - 2P with 1 NO, Cat no - CS94980 ) - 1 nos. iii) Digital Time Switch ( Make - L&T, Cat No - Crono 67DDTO ) - 1 nos. iv) LED lamp for Indication purpose -- 1 nos. v) Auto/Manual Toggle Switch -- 1 nos. vi) 2 Way Connector - 2 nos. [ NS ]

SUB-HEAD 3 -- BDB,PDB,VTPN ETC Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall as per GS. (2+14) Way Enclosure (607713) [ Make - Legrand ] [ 13/D-9 ]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages as per GS. 6 Way Enclosure ( 607716 ) [ Make - Legrand ] [ 14/D-10 ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs as per GS. -- 6-32 A SP MCB [ Make - Legrand ] [ 7/D-6 ]

63 A TP MCB [ Make - Legrand ] [ 7/D-6 ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs as per GS. -- 40 A DP Isolator [ Make- Legrand ] [ 6/D-5 ]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment 6 way, Horizontal [ 16/D-12 ]

SUB-HEAD 4 -- POLYTHENE PIPE AND WIRES Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 19 mm dia 3 mm thick polythene pipe without earth continuity wire. [ 3(a)/ E-2 ]

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 25 mm dia 3 mm thick polythene pipe without earth continuity wire [ 4(a)/ E-2 ]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 3 x 22/0.3 (1.5 sqmm) [ 1(b)/E-9 ] [ For 6A S.P.B. ]

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) as ECC [ 1(s)/E-9 ] [ For ComB, 16A D.P.P. ]

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC(for AC Point)

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) as ECC [ 1(y)/E-9 ] [ For SPNDB ]

4 x 126/0.4 ( 16 sq mm ) + 2 x 80/0.4 ( 10 sq mm ) ECC. [ 1(g1)/E-9 ] [ From VTPNDB to TPNDB ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes as per GS. 2.5 Sq mm [ 9(i)/ F-5 ]

4 Sq mm [ 9(ii)/ F-5 ]

6 Sq mm [ 9(iii)/ F-5 ]

10 Sq mm [ 9(iv)/ F-5 ]

16 Sq mm [ 9(v)/ F-5 ]

SUB HEAD 7 -- FIXING OF LIGHT FITTINGS Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire as per GS. -- [ 17/C-2 ]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire as per GS.-- [ 16/C-2 ]

Fixing only lamp. [ 11/C-2 ]

SUB HEAD 8 -- SUPPLY OF LIGHT FITTINGS Supply & Delivery of Single LED Fitting (18 watt, 230 V AC, 50 Hz, 4000K NW, THD< 10%, built in 2.5 KV SPD) with all accessories and 1 nos. LED Tube, as directed by EIC, Luminious efficacy > 105 & <120 Lumen/watt. The LED luminaves & accessories shall have BEE certification. [ NS ]

Supply & Delivery of Twin LED Fitting (18 watt, 230 V AC, 50 Hz, 4000K NW, THD< 10%, built in 2.5 KV SPD) with all accessories and 2 nos. LED Tube, as directed by EIC, Luminious efficacy > 105 & <120 Lumen/watt. The LED luminaves & accessories shall have BEE certification. [ NS ]

Supply of 9 Watt LED lamp to the lamp point. [ Make - PHILLIPS, Colour - Cool Day White, Lamp Base - B22, Pin type ] [ NS ]

SUB HEAD 9 -- FIXING OF FANS Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages as per GS.-- [ 29/D-14 ]

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw as per GS.-- [ 18/(a)/E-6 ]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [ 21/(a)/C-3 ]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. [ 29/C-4 ]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible as per GS. -- 23 cm. ( 9 '') [ 28(a)/C-4 ]

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For Aluminum, 23 cm. Exhaust Fan ( 9 '') [ 32(a)/D-14 ]

SUB HEAD 10 -- SUPPLY OF FANS Supply of ceiling fans complete with all accessories having the following Model / Cat No. [ Make - Crompton Greaves/Orient - Summer Cool/ New Brize ] 1200 mm Sweep AC Ceiling Fan ( HIGH SPEED PLUS ), Colour - White, with safety wire & PS 2 Capacitors. [ NS ]

Supply & Delivery of 230 Volt AC [ Make :- EPC Heavy Duty, Full Metal type, Sweep 450 mm/18", Wall Bracket 4 Blade ] Wall Mounting Fan. [ NS ]

Supply & delivery of Exhaust Fans complete with all accessories having the following Model/ Cat No. [ Make - EPC Heavy Duty ] 9 '' ( 230 mm ), Speed - 970 RPM [ NS ]

SUB HEAD 11 -- MISCELENEOUS Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. [ 22/D-13 ]

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. [ 20(a)/D-13 ]

PART -- B ( S.I.T.C. WORK OF AC MACHINE ) Supply & Delivery of High-wall Split-type Air-Conditioner having following specification: Cooling Capacity-5.4 kW (Minimum) Minimum ISEER 3.8, BEE level 3-Star(min)[1st July22 to 31st December 2025] IS Compliance-IS-1391(Part-1 & Part-11) with all amendment Refrigerant R410A/R32 Compressor-Rotary/Scroll Evaporator & Condenser Coil - Copper Operating outdoor temperature - 48°C and above Air Flow: 600 CFM (Minimum) Power supply -230V, 50Hz (±tolerance asper applicable standard), as directed by EIC. The scope of work is also includes supply and fixing of the following: (i) Necessary refrigeration copper line with nitrile rubber insulation and wrapping tape-3 mtr (ii) Necessary 3/4 core copper cable (FRLS type make: Finolex/RR Kable/Polycab/Havells/Gloster) 3mtr and 230V. 25A, 3pin plug top with indicator (Anchor/North West/Legrand/Havells) Make: General/Daikin/Mitsubishi Electric/Blue Star/Voltas/Carrier]

Supply & Delivery of High-wall Split-type Air-Conditioner having following specification: Cooling Capacity-6.5 kW (Minimum) Minimum ISEER 3.8, BEE level 3-Star(min)[1st July22 to 31st December 2025] IS Compliance-IS-1391(Part-1 & Part-11) with all amendment Refrigerant R410A/R32 Compressor-Rotary/Scroll Evaporator & Condenser Coil - Copper Operating outdoor temperature - 48°C and above Air Flow: 800 CFM (Minimum) Power supply -230V, 50Hz (±tolerance asper applicable standard), as directed by EIC. The scope of work is also includes supply and fixing of the following: (i) Necessary refrigeration copper line with nitrile rubber insulation and wrapping tape-3 mtr (ii) Necessary 3/4 core copper cable (FRLS type make: Finolex/RR Kable/Polycab/Havells/Gloster) 3mtr and 230V. 25A, 3pin plug top with indicator (Anchor/North West/Legrand/Havells) Make: General/Daikin/Mitsubishi Electric/Blue Star/Voltas/Carrier]

Installation, Testing & Commissioning of Indoor & Outdoor unit of above HI Wall Split AC machine after making hole in wall etc. as per direction of EIC including supply of required Refrigant, S & F of necessary fixing arrangement for indoor and 40 x 40 x 5 mm. MS angle iron frame for outdoor unit ( or arrangement recomended by Manufacturer ), duly painted, laying and making connection of refrigeration pipe, power cable, drain pipe etc. as per direction of EIC. [ NS ]

S & F of additional following items for length exceeding 3 mtr. For complete installation and commissioning of above AC machine. (i) Supply & Fixing of extra Refrigerant pipe (as requisite dia) with nitrite rubber insulation and wrapping tape (each mtr. Refrigerant pipe will include cost of 1 meter liquid pipe line and 1 mtr. gas pipe line of required dia and other accessories as required). [ NS ]

S & F of additional following items for length exceeding 3 mtr. For complete installation and commissioning of above AC machine. (i) 2.5 sqmm, 3/4 core copper cable (FRLS type, Make - Polycab/Finolex/RR Kabel). [ NS ]

Supply & Laying Soft Drawn PVC Drain pipe 19 mm. dia with proper supports & brackets as per direction of EIC. (Make - Suprime/Oriplast). [ NS ]