E-TENDER FOR CIVIL, FURNISHING, ELECTRICAL AND ALLIED WORKS OF PUNJAB AND SIND BANK, BRANCH CHAKKAR

BOQ PUNJAB & SIND BANK BRANCH & ATM CHAKKAR, DISTT. LUDHIANA AMOUNT GST % GST AMOUNT TOTAL AMOUNT

1 FURNISHING WORK 18%

2 ELECTRICAL WORK 18%

3 A.C. WORKS 18%

4 A.C. UNITS 18%

5 CIVIL WORKS 18%

DETAIL OF FURNISHING WORK PUNJAB & SIND BANK BRANCH & ATM CHAKKAR, DISTT. LUDHIANA

DETAIL OF BANK ESTIMATE

SR ITEMS NAME UNIT QTY RATE AMOUNT

1 Providing and fixing Gypsum false ceiling as per India Gypsum specification for ceiling with drops as per drawing including of providing and fixing G.I. Frame work as per specification of India gypsum at a distance of 2'0"c/c both ways complete with 12.5 mm board and all necessary perimeter channels etc. No extra payment will be made for the cutting of light points, stained glass, cove lighting etc. The measurement will be taken in one level, rate should include the drops also, no extra amount will be paid for the drops. The joints to be properly mended with paper tapes and gypsum compound all complete. The rate should include the full completion of the ceiling. At the time of handing over the site all necessary repairing work to be considered if required. in Branch & ATM Sqfts 540.00

2 24'' x 24'' Grid False Ceiling (FINE FISSURED PLANKS): Providing and Fixing False ceiling Grid using hot dipped Galvanized steel sections, exposed surface chemically cleaned capping pre-finished inbaked polyster paint. Main tee of size 3000 x 32 x 24 mm at every 1200mm c/c maximum, 1200mm cross Tee of size 1200 x 27 x 24mm at every 600mm intervals and 600 mm cross Tee of size 600 x 25 x24mm at 1200mm max and 3000 x 19 x 19mm wall angle all around the wall to form grid size of 600mm x600mm. The Main grid to be suspended to the MS frame with 2mm pre-straightened GI wire and GI adjustable clamp and Laying of fibre wool board having Fire rating of 60 min. as per BS 476/23 of 1987, Noise reduction co-eff. (NRC) of 0.50, Light on branch & ATM Sqfts 300.00

3 Providing and fixing partition in position as per design with 2'' x 2'' 250grm per ft wt JINDAL Aluminum section finished frame work @ 2'-0'' c/c both ways screwed to the floor and ceiling with M.S. Cleats. The measurement will be taken up to the false ceiling visible height in case of full height partition. The frame work will be cladded with 9 mm thk comm. Ply both sides and to be finished with approved 1 mm laminate (color with vertical grain) as per design with adhesive. 3" high laminated skirting to be fixed bottom side of the partition. Extra frame work to be fixed for fixing class. In the glazed partition 10mm thk. Spasifications for all Glass and Solid Partitions. FOR CASH CABIN PARTTION Sqfts 80.00

4 PARTLY GLAZED MANAGER CABIN PARTITION UPTO 8'-6" ft TOUGHENED GLASS WITH ETCHING Sqfts 220.00

5 PARTLY GLAZED LOW HEIGHT PARTITION UPTO 4’-0’ HT. Sqfts 90.00

6 SOLID PARTITION IN STRONG ROOM Sqfts 0.00

7 SOLID REAR PARTITION AND ATM PARTTIION Sqfts 310.00

8 12mm thick Counter Front Glass Vertical 1.5ft ht with the D Brecket Fitting ouetr eaching and center bank logo and window glass Sqfts 42.00

9 Flap Door Sqfts 16.00

10 FULLYTOUGHENED GLASS MAIN ENT. DOOR 2 NOS. for BRANCH AND ATM:- (including 3’x7’ door and fixed glass) P/F toughened glass (12mm thk ) door with pencil polish edges all around and including glass etching and pattern and emblem as per design fixed with necessary patch fittings assembly including top and bottom patches, heavy duty floor OZONE Machine, bottom lock, SS brushed finished 2' long and 1" dia. handle on both sides of shutter etc. all complete as directed by Bank. Sqfts 112.00

11 CASH COUNTER. the Cash Counter Drawer & Cabinet under counter inner side 0.8 mm thick white mica and Outer side 1 mm thick mica colour as per brand manual.For customer as per layout with provision of 3’-9” high, 2’-6” deep with shelf for CPUStand and footrest and storage unit out of 18 mm thick commercial plyboard with 1.00 mm thick laminate on all exposed surfaces with key board tray with telescopic slides. All edgings. Margin etc. including 3’x 1’-6” size fixing Coloured Lacquered Glass for aesthetic appearance in front of counter with coloured focus light and bank logo (Spasifications for all counters and Tables) Rft 5.50

12 Officer Counter Rft 14.00

13 Manager Table :- 6’-0” x 3’-0” X 2’-6” H Providing and fixing M TABLE 6’-0”x3’-0”x2’-6” (ht.) and 10mm beveled glass with etching of approved make to be fitted on top obtain the total height of 2’-6” as per detailed drawing . made up of 19 mm commercial board of approved make the finished with 1 mm thick laminate of approved make and shad as approved as par detailed drawing. Table shall be provided with 3 drawers sliding on telescopic channels with proper locking arrangements and keyboard with telescope channels tabletop shall be finished with 1.0 mm thick laminate of approved shade & quality . The work includes provided and fixing locks , wire manager, spirit polishing of steam beach bending etc. complete in all respects to the entire satisfaction of the architect. Nos 1.00

14 Reception Tabl e Nos 0.00

15 Cheqhue Drop Suggestion Comp Box Nos 2.00

16 Wall Mounting Table for vouchers slip Nos 1.00

17 2.5ft round 4ft ht customer table Nos 1.00

18 One Notice Board One Pinup Board 2x3ft Nos 1.00

19 Providing and fixing paneling on wall.upto 8'-6" height Framing shall consist of with 2.0'' x 1.0'' 150grm per ft wt JINDAL Aluminum Section @ 2'0" C/C. Both ways horizontally and vertically on the wall. This framing would be covered by 9 mm thk comm. Ply front sides and to be finished with approved 1 mm thick laminate (color with vertical grain) as per design with adhesive. 3" high laminated skirting to be fixed bottom side of the partition. Extra frame work to be fixed for fixing class if any Panaling Banking Hall Sqfts 430.00

20 Panaling BM Cabin 8'-6" height Sqfts 220.00

21 Panaling Cash Cabin 8'-6" height Sqfts 70.00

Panaling on column 8'-6" height Sqfts 60.00

22 Alum. Gril on Cash 6mm thick Sqfts 45.00

23 Full height Storage Cabinet 7'-0" HEIGHT in record room :_ Drawers in storage 2 sided laminated HDMR Board and front panel of single sided laminated HDMR Board.Providing and fixing Low / Full height storage 16" deep made out of 19mm HDMR 1.0mm laminate in all exposed areas. The internal drawers and selve to be made out of 19mm thick two side lamainat HDMR (color, vertical grain). back sides to be made out of 6mm white ACP Sheet the drawer play on the sliding powder coated channels and necessary locks, handles, etc All the exposed edges of the boards / HDMR/ plywood’s to be covered with wooden lapping / moldings duly polished all complete. Sqfts 0.00

24 Low height sroarge :- sapecifications same as item no 23 Sqfts 60.00

25 Vertical Blinds:- Sqfts 0.00

26 Two seater SS:- Pcs 1.00

27 Center Table:- 24” x 48” Pcs 1.00

28 ACP PANELING IN ATM:- Providing & fixing in position ACP (Aluminium Composite Panel) wall panelling having minimum ACP thickness of 3mm and minimum foil thickness of 0.25 mm on both sides with Aluminium sections of 1.5" X 1" @ 2'-0" C/C both ways. Panels shall be neatly fixed to the frame with 3M or equivalent adhesive and joints shall be finished with silicon based sealant. ACP shall be approved as per bank's approval. Item shall include proving & fixing additional sections as required for fixing Indoor AC units, proper access panel for ATM power point, proper locking arrangement for plug point by providing additional framing etc. complete colour scheme as per brand manual. Sq.ft. 280.00

29 ALMIRAH IN PANTRY ABOVE 5'-0" HEIGHT Sq.ft. 30.00

30 UPS room partition with bison sheet upto 8'-6" height Sq.ft. 80.00

31 Chair for Executive, BM Providing and supplying High Back Executive Revolving Chair of approved make such as Geeken / Duaco / Featherlite (or equivalent), as per approved design. Nos 1.00

32 Chair for Staff Providing and supplying Mid Back Ergonomic Revolving Chair (Mesh Type) of approved make such as Featherlite / Geeken / Duaco (or equivalent), as per approved design. Nos 8.00

33 Providing and fixing rolling shutter box for branch and ATM panelling / enclosure of required size as per description of ACP panelling above. The rate shall inclusive of necessary hardware fittings like hinges, screws, tower bolts sealant, trap door, locking arrangement etc complete. Sqfts 140.00

GRAND TOTAL 0.00

DETAIL OF ELECTRICAL WORK PUNJAB & SIND BANK BRANCH.& ATM CHAKKAR, DISTT. LUDINANA

DETAIL OF BANK ESTIMATE

SR ITEMS NAME UNIT QTY RATE AMOUNT

1 moduler light points, fan points, bell points, sockets etc. with 1.5 Sq.mm PVC insulated, 1100 V grade grade copper conductor wires and 1.0 Sq mm copper earth wire and 1.0 Sq mm copper earth wire in concealed/surface using PVC (Heavy)25mm dia conduits, accessories such as bends, tees, saddles, draw boxes, mounting boxes, inner plates, cover plates, ceiling rose etc. (including chase cutting where where ever required) and chromium plated brass screws/rowel plugs etc.. The conduits to be laid in ceiling with proper clamps/wall/floor and filling the chase with cement mortar and finish the same in original form/wooden partition/above false ceiling with proper clamps and wall cutting to be concealed (wherever required as per standard specification. (spasification for all lighing points) One Light Point Branch & ATM Nos 45.00

2 Two Light Point Nos 10.00

3 Wall Fan Point Nos 6.00

4 Ceiling Fan Point Nos 2.00

5 Exhaust Fan Point Nos 2.00

6 Call BelL Point Nos 1.00

7 5 Pin Socket 5mpr Nos 5.00

8 5 Pin Socket 15mpr Nos 4.00

9 Circuit Wiring 1.5 and 1.0mm for 5mpr light points Rmt 280.00

10 Power Point 15mpr as serial no. 1, but wiring for 15A 5-Pin socket by using 2.5 sq mm PVC insulated 1100V grade copper conductor wire with independent Nos 17.00

11 Circuit Wiring 2.5mm for 15 amp Power points Rmt 160.00

12 AC Point with 5pin socket and 32a mcb Nos 6.00

13 Wiring 4.0mm for AC Point Rmt 120.00

14 Incommer 63A 4P Nos 1.00

15 Incommer 40A 4P Nos 3.00

16 40A 4way TPN DB Nos 3.00

17 8Way TPN Db Nos 3.00

18 ELECTRICAL MAIN PANEL Design, manufacture, providing, storing & installing in position, effecting proper connection, testing and commissioning of panel made of 16 SWG, CRCA sheet steel. It shall be dust and vermin proof. It shall have compartmentalized construction with bus bar chambers, cable alley, cable glands plate etc. as required, duly painted from inside as well outside. It shall have the following: MAIN PANEL: 1 No.100 Amp. TPN, MCCB (25 KA breaking capacity), Bus bars 100 Amp., 3 phase, 4 strips, 415 volts, 50 Hz. copper busbars with colour coded PVC heat shrinkable sleeves. There should be 2 sets of BUS BAR in such a way that AC load should not be connected to GENERATOR power. 100 Amp. Changeover Switch Instruments: Digital Multi function Meter of standard make for displaying Input Voltage, Ampere, Power factor, KWH used with CTs. OUTGOING: 5 Nos. 32 Amp. TP MCB (For LDB, PDB, Branch UPS, Inverter and Spare Feeder) from Generator Powered Bus. 2 Nos. 63 Amp. TP, MCB (For AC DB and Spare Feeders) from Non-Generator Powered Bus. 6-32 AMP DP MCB. 3 Nos (for Glow Sign board, Strong Room, and spare feeder) from Generator Powered Bus. The design of panel should be got approved by the Architect before manufacturing. Also, the provision for 1/2 spare outgoings should be considered for future expansion. The job shall be completed to the satisfaction of the Bank. Nos 1.00

19 S/F of LED 2 X2 Light fixture instead of equal Luminous Led light of Philips by the name of Green Square Led Luminaries on Nos 14.00

20 S/f of down light LED Luminaries with reflector (Havel’s/Crompton/Philips) complete With cutting of false ceiling 15 watt LED. Nos 15.00

21 LED 4ft Patti Light fixtures Nos 13.00

22 Supply & fixing of ceiling fans 1200 mm Nos 2.00

22 LED 2ft Patti Light fixtures in cash Nos 1.00

23 Fullly metal body 450mm Wall mounted Fan Nos 6.00

24 18" Exhaust fans Commercial/ industrial with clamps, bolt/dash by grouting on wall for Banking Hall. Nos 1.00

25 12" Exhaust fans with clamps, bolt/dash fastener by grouting on wall for Toilets. Nos 1.00

26 UPS Computer Point Wiring with sx2.5 sqmm + 1x1/5 sq mm PVC insulated 1100 V grade multistranded copper conductor wires in 2 mm thick PVC conduit from UPS DB to computer point. Each point to have 3 nos 6A -5 Pin modular type sockets, one 6A indicator at below the top of table/counter and controlled by one 16A modular switch at above the table top in wooden partition with all accessories, inner/outer plates, metal box etc. and to be fixed on wooden partitions/by grouting on wall etc. as per the requirement at site. Nos 9.00

27 wiring for ups point 2.5mm Rmt 80.00

28 porcelain fuse 63mp Nos 1.00

29 Cutout 63mp Nos 4.00

30 Cat 6 Cable with RJ connector Rmt 250.00

31 Patch Cord 2mtr with RJ connector Nos 9.00

32 Patch Cord 1mtr with RJ connector Nos 9.00

33 Data IO Box with 2 port Nos 9.00

34 Supply and fixing pair telephone MDF consisting of tag blocks, disconnector type, complete with powder coated metal enclose, krone tag block mounting arrangement telephone distribution chart and locking arrangement [for P&T/EPABX] Nos 2.00

35 wiring for telephone point Rmt 45.00

36 Providing and fixing of Cable Manager, Data Tray and 9 U Rack Pcs 1.00

37 24 Port Switch Pcs 1.00

38 Preparation and commissioning of earth pits with PIP technology GEL type 50mmdia 3000mm long earth electrod. (One Dedicated Earthing for ATM UPS, Branch UPS and main panel Pcs 3.00

39 25x3m Copper Strip from earthing Rmt 50.00

GRAND TOTAL 0.00

DETAIL OF ELECTRICAL WORK PUNJAB & SIND BANK BRANCH.& ATM CHAKKAR, DISTT LUDINANA

Items Name Unit Qty Rate Amount

1 Supply & Fixing with installation of stabilizer (having capability to work from 90 Volts) of copper wiring Pcs 4.00

2 Supply/fixing of stand for external unit of A.C. Pcs 4.00

3 Installation charges of A.C. Pcs 4.00

4 Providing and fixing concealed copper pipe with wire proper insulation i/c cutting and repairing etc. Rft 150.00

5 Providing and Fixing Concealed Drain pipe with proper fixing & water proofing i/c cutting and repairing etc. Rft 80.00

6 Air Conditioners un-installed from this Branch & ATM shifting and re-installation in the branch including gas and necessary wiring and any small items which needs in installation along with service. Pcs 2.00

Grand Total 0.00

sno Items Name Unit Qty Rate Amount

1 Split AC 1.00 ton in ATM AND MANAGER CABIN copper make Five Star Rated Make Voltas, Blue star, Complete with Outdoor Units, Indoor Units, Mounting Racks, Copper Insulated Tubing, Wiring, which is standard with equipment Note:-Out of there two companies selection of brand will be at sole discretion of bank Pcs 1.00

2 Split AC 1.50 ton in Banking Hall :- copper make Five Star Rated Make Voltas, Blue star, Complete with Outdoor Units, Indoor Units, Mounting Racks, Copper Insulated Tubing, Wiring, which is standard with equipment Note:-Out of there two companies selection of brand will be at sole discretion of bank Pcs 3.00

Grand Total 0.00

sno Items Name Unit Qty Rate Amount

1 Demolition of window of four nos. including Dispose Of Malba Etc. from 100 meter distance form site as per bank s instrucitons Jo/L.S.

2 Brick work Brick work 4.5" thick wall in super Structure for new walls of Toilet and Pantry wall :- M-150 class brick work in 1:6 cement and fince sand of 1.25 fineness modulous in super strucutre including supply of all materials, labour and T & P etc. required for proper completion of the works . Sqfts. 180.00

3 Brick work Brick work 9" thick wall in super Structure forwindow space :- Specification same as item no 2 Sqfts. 110.00

4 plastering on New walls and ceiling :-- 12mmthick plaster with a cement & fine sand of 1.25 fineness modulas in 1:6 over brick work minimum thickness not to be less than 1cm, i/c supply of all materials, labour and tools and plant, etc. Sqfts. 800.00

5 Ceramic tiles flooring in Toilet new and old toilets with floor laveling and Laveling material if required incluyding demoltion of old flooring (somany and Kajaria only) (tile basic rate Rs. 70/-per sft.) Sqfts 80.00

6 One pedestal wash basin full Complete including soap dish and towel stand and tap and mirror 2'x2.5' fixing and fixtures pipe and necessary fiting total items somany and jaquar only (including all old fittings dismantling) (basic rate rs/ 3000/- each L/s Job 1.00

7 One European Seat including Cistern in HE & She Toilet:- Complete including fixing and fixtures Tap, Towel Rail, pipe incluidng all nec essary fittings etc. (fittings parryware, Hindustan, Somany and Jaquar etc.) Basic rate of seat Rs. 14,000/- L/s Job 1.00

8 Rolling shiutter in gate opf parking side entry:- Rolling shutters are made of mild steel strips that are interlocked and mounted on a pipe shaft to roll up. The strips are 1.25mm thick and 80mm wide. Springs made of high tensile steel wire are used to balance the shutter and are supported by steel brackets. Guide channels are a minimum of 60mm deep for shutters up to 3.5m wide and 75mm deep for wider shutters. The shutters are installed by fixing the support brackets, placing the shutter in the guides and fastening everything in place. Payment is based on the area of the shutter in square meters and includes all components and installation. Sqfts 70.00

9 iron framed chaukhats along with doors for doors of Toilet fixed i/c simple mouldings, stright work as in chaukhats i/c supply of all materials, labour and t&p etc and including hold fast & Fixtures etc complete Sqfts 18.00

10 Wooden Door for record room and Pantry :- of Kapoor Sal Wood to be provided in wall / partiton wherever door is required to be provided finished with melamine poilsh as per specifications given in 2.1( c) and fixed with 75mm Long Screws of approved make. Sqfts 50.00

11 Sanatry Fittings in new she toilet including pipe and necessary items witch is required for complet fitting (including remove all old fittings job 1.00

12 FIRE DOOR FOR UPS ROOM : Supplying & fixing Makes- ( Hormann, Tata Pravish, Flametech) P/F KFD 40mm thick STEEL -MATE powder coated,120 minutes fire rated (for Stability & integrity) GI steel or Galvanized (Zinc Coated)steel Door and frame by KFD confirming to IS 3614 part 2& BS 476 part 22.the Door shutter made of with 0.8 mm thick steel pressed formed to provide a 46 mm thick fully flush double skin door shell with lock seam joint at srile edges. the internal construction of the door to be phenolic .resin impregnated specially designed honeycomb craft paper with suitable internal reinforcement. Suitable reinforcement is to be providing in the door shutter to receive the hardware and hardware to be fixed on the door with no visible screw other then in the glass beading The doors with double shutters are to be provided with astragals on both sides and astragals to be fitted to the door without any screw. The shutter to be fixed with SS Hinges (Size 100X75X3mm),(3nos per shutter) handle (1set), locking (1nos) etc with complete fittings.(Make- Dorma,Ozone,Godrej). Sq.fts. 21.00

13 PAINTING-EXTERNAL WALLS - EMULSION PAINT:- (water proof and weather proof paint) Providing and applying two coats of paint of approved shade and brand over a coat of primer on internal plaster surface including cleaning, sand papering, with Birla white putty, cost and conveyance of all materials, scaffolding, labour charges, finishing smooth etc., all complete as per standard specification. Sqfts 850.00

14 walls glazed tiles 1'x1.5' up 7ft ht fully toilet block tiles in toilets (somany and Kajaria only) (including all old Tiles Dismantling base rate Rs. 80/- Sqfts 260.00

15 r.c.c. work in slab in patnry and roof slab of new toilets :- Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto plinth level, including cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).includingplastering etc. for pantry slab abd new toilet roof slab including mild steel works Sq.fts. 80.00

16 Painting or Varnishing on New and old work in small area or new wood work and iron work with one coat or ready mixed priming paint and Two coat or approved superior quality ready mixed paint or varnish including supply of all material , labour and tools and etc. Sqfts. 450.00

17 PAINTING-INTERNAL WALLS AND CEILING - EMULSION PAINT:- Providing and applying two coats of paint of approved shade and brand over a coat of primer on internal plaster surface including cleaning, sand papering, with Birla white putty, cost and conveyance of all materials, scaffolding, labour charges, finishing smooth etc., all complete as per standard specification. Sqfts. 2000.00

18 walls glazed tiles 1'x1.5' up to 3ft ht on the exterior wall (somany and Kajaria only) Sqfts. 150.00

19 Granite stone flooring in front space of branch and ATM :-Black COLOUR Granite flooring with Leveling material if required including dismantling of old flooring (Granite basic rate Rs. 200/-per sft.) Sqfts. 80.00

20 Dismantling of wall in front of ATM L/s Job 1.00

21 Vitried Tiles (600MM X 600MM) Flooring in Banking Hall and ATM &UPS ROOM , strong rom , Recrod room & Pantry etc:- Colour as per Brand Manual with floor laveling and Laveling material if required (somany and Kajaria only) including dismantling of old flooring ( tile basic rate Rs. 60/-per sft.) sqfts. 1080.00

1. All electrical and furnishing materials to be used strictly follow the list of approved materials. 2. Any deviation in the use of materials at site other than approved materials list will not be permitted and the bank may cancel the contract at any time for any such misconduct. 3. The workman ship and quality of work should be good quality and to be satisfactory level of the bank’s architect and bank. 4. Colour scheme as per brand manual. 5. Final Amount in words and figures filled in Tender will be considered . No further discount written in numerical or words will be considered. After Tender has been filled. No condition or % of discount etc. will be considered which dictates re-calculation of any kind. 6. GST Extra. (tender not accepted if filling rates with GST). 7. Before filling tender please go through attached drawing for distance & other related quarries. We also advise Vendor to visit site physically if possible to determine actual work environment and difficulties. 8. No labour charges will be given for old furnishing dismantling and shifting Almirahs and after works re-shifted in this place.