Renovation/Modernisation of Hostel No.1, Hostel No.2, Smart Class Room, Seminar Hall, Soil Testing Lab, Toilet Blocks, Park Space and Mess etc. at IMTI Kota (Raj.) under National Hydrology Project.

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.

Demolishing mud phuska/ Lime dhar/ Kharanja in terracing and disposal of unserviceable material within 50 meters lead.

Dismantling CI or asbestos rain water pipe with fitting and clamps including stacking within 50 meter lead:100mm dia pipe.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable MATERIAL within 50 metres lead as per direction of Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable MATERIAL and disposal of unserviceable MATERIAL within 50 meter lead: For thickness of tiles 10mm to 25mm.

Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable MATERIAL and disposal of unserviceable MATERIAL within 50 meters lead. Of area 3 square meter and below.

Dismantling precast concrete or stone slabs in wall partitions etc. including stacking within 50 meter lead:thickness up to 40 mm.

Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area 3 square meter and below.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.

Dismantling GI pipes (external work) including excavation and refilling trenches after taking out the pipes and including stacking of pipes within 50 meter lead: 15mm to 40mm nominal bore.

Removing aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable MATERIAL and stacking of serviceable MATERIAL with in 50 meters lead as directed by Engineer-in-charge.

Dismantling marble dado, sides of pillars etc. with care.

Demolishing cement concrete manually/ by mechanical means including disposal of MATERIAL within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix.

Dismantling tar felt over roofing complete including stacking of serviceable MATERIAL and disposal of unserviceable MATERIAL within 50-meter lead.

Dismantling of flushing cistern of any size including stacking of useful MATERIALs near the site and disposal of unserviceable MATERIAL within 50 meter lead.

Renewal of old putty of glass panes (length)

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand).

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand)

Half brick masonry in Superstructure , above plinth level upto floor Three level using bricks of designation 75. In Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and laying damp-proof course with cement concrete grade M-15 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification .75mm thick.

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor Three level excluding the cost of centering and shuttering. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M 20 grade Nominal Mix.

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor Three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, Columns, Pillars, piers, abutments, posts and struts etc. M 20 grade Nominal Mix.

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Centering & shuttering with plywood or steel Plate including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

Centering & shuttering with plywood or steel Plate including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for : Columns, pillars, posts and struts etc.

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor Three level. Thermo-mechanically Treated bars (Conforming of relevent IS code)

Providing and fixing 14 mm thick Acoustical with fine fissured tiles/ Mineral fibre high density tiles with butt edges false ceiling tiles of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge. ( The tiles should of 90 % RH avg. NCR 0.55 light reflectance> 80% thermal conductiveity K = 0.052-0.057 w/m K colour white. Fire performance class 0/class I(BS 476) with warranty against sag)

Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting.

P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600mm.

P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm X 600 mm.

Providing and fixing 1st quality MAT finished Ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).

Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.

P & F 1st quality Heavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.Size 300mm x 450mm

Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Size 300mm x 600mm.

Providing and fixing Polyvinyl Chloride sheet / P.V.C. tile (with backing of Hessian cloth or other woven fabric flooring using rubber base adhesives including rolling with light wooden roller complete : 3.0 mm thick sheet.

Providing and fixing skirting of prelaminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer (like Novapan, Ecoboard, etc.) or graded particle board (like Bhutan Board) (medium density) Grade-I, Type-II, IS : 12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposd surface complete. 18 mm thick.

Providing and laying of skirting 89 mm wide having both side laminations with molding in upper side with matching of floor fixing with nails and screws & fevicol complete in all respect as per direction of EI.

Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete

Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness instead of cement mortar.

Grinding & polishing on mosaic / polished stone flooring : Old Surface.

Providing and fixing 15 to 20 mm thick Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12 mm (Av.) thick base of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : Green / Black / Other granite. Above 3601 Cm2 Slabs.

Providing and fixing 15 to 20 mm thick Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12 mm (Av.) thick base of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : Good quality South Black-Above 3601 Cm2 Slabs.

Granite Work / Kota Stone. Half Edge moulding.

Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work / Kota Stone, Full Edge moulding

Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Rajnagar 2nd quality with light spots and streaks. Above 3601 Cm2 Slabs

Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.

801 Cm2 to 1500 Cm2 Tiles

1501 Cm2 to 3600 Cm2 Tiles

Supplying and fixing dressed sand or other approved stone shelves, tands in cement mortar 1 : 3 with fine dressed edges : 35 mm thick.

Providing & fixing door, window, Chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade : Sal wood Grade - I.

Providing and fixing External grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30 mm thick. Decorative teak veneer both side.

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :40 mm thick Decorative teak veneer both side.

Add extra in Flush doors : Extra for providing vision panel not exceeding 0.1 Sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured)

Providing and fixing fully paneled Double leaf shutter for doors as per approved design and drawing with approved ordinary C.P./oxidized steel fittings as per Annexure – A’ and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mmx12mm on both faces complete 30 mm thick Nigeria teak wood grade - I: Wire gauge 24 gauge 14mesh of IS designation 85 gauge wires of dia0.56 mm panels - I.Providing Single leaf shutter instead of double leaf.

Providing and fixing Aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion. Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron)

Providing and fixing Aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For shutters builtup standard tubular sections of openable doors, windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockers shall be made for seperately). Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron).

Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With glass panes of 5.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835.

S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws at not exceeding 150mm distance at all heights with all lead and lift with scafolding.

Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Prelaminated particle board with decorative lamination on both sides.

Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron)

Providing and fixing sun control film, thickness of film 1 Mil Visible Light Transmittance 4-24% & Solar Energy Transmittance 42-51% & Total solar Energy rejection 37-43%of approved colour and shade , complete in all respect , at all level , as directed by engineer- in -charge.

Providing and fixing P.V.C. door frame made from extruded PVC confirming to IS : 10151-1982 section having multi chamber cross section with a maximum wall thickness of 2.8 mm + 0.3 mm duly reinforced with steel tie rod at bottom, and weather seals complete P.V.C. door frame section (68 x 60 mm).

Providing and fixing of Plastic shutter Infill made from extruded multi chamber hollow P.V.C. section having cross section of 200 x 20 x 1 mm and shutter frame made from extrude P.V.C. section in the configuration of double walled 'C' section having an overall cross section of 40 x 37 mm and door fittings such as hinges, aldrop, Handles, stopper, locking bolt will be provided.

Providing & Fixing of ward robe shutters made out of 19mm thick BWP block board ISI of superior quality make. Front side finishing with 4mm thick teak veneer approved make and 0.8mm thick approved shade mica in the inner side. Covering with teak wood beading 25x12mm all the sides of shutter & 35x12mm on outer frame for making good the wall joint including heavy brass S.S. fittings (Handle 200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos., SS Hanger Rod 20mm dia) complete with melamine polishing as per drawing and design approved by Engineer in Charge.

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 19 mm thick ( for almirah shutter). Decorative teak veneer one side. Add extra in flush doors for double leaf. Add extra for sunmica 0.8 mm thick.

Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using : 12 mm thick one side laminated board Practical board (Phenol bonded).

Providing and fixing Nigeria / Ghana /Ivory Coast Teak wood grade-I mouldings and beadings in droos and windows size :-50x20 mm

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With brass cover plate.

Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent with pair of CP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge.

Providing and Fixing superior quality like Hardvyn or equivalent Hydraulic door closure.

Providing and fixing Curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:20 mm

Providing and fixing Horizontal blinds /Venation blind shall be cold rolled formed U shape 23 mm high x 25 mm wide with flanged adages. It shall be made of heavy gaze 0.56 mm galvanized steel, Slates shall be made of virgin Al. alloy (having 3.5 – 4.5% of Mg. Content of width 25 mm. The slat shall have dust guard paint coating, the cord lock shall be of thick tomized steel and shall be securely attach in the head rail. It shall provide locking arrangement of the cord. Tilt rod shall be made of galvanized steel it shall have a D shaped with an average cross section with diameter of 6 mm to achieve minimum torsional deflection.

Providing and fixing stainless steel ( Grade 304) Railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase and making good and painting exposed portion of the clamps complete. In new roof.

Providing and laying Lime Dhar only 90 mm thick average on roofs on ground floor with 1 : 2 : 2 : 2 (1 lime putty : 2 surkhi or sand : 2 old lime mortar powder : 2 stone grit 12 to 20 mm) mix by volume with required quantities of Gur, Gugal, Methi, Hemp etc. Properly compacted and smoothly finished in all respect (JAIPUR PRACTICE) as per specifications.Add extra over item for each subsequent storey for thickness.Above 50 mm upto 100 mm

Providing gola (batta) in lime concrete using 50% lime surkhi / sand mortar 1 : 2 with grit along joint of walls and terrace finished with lime mortar 1 : 2 plaster with Gur, Gugal, Methi etc. in concave shape of size : 100 mm x 100 mm.

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick ..

Add extra over item No. 12.1 to 12.12 for repairs to plaster including cutting the patch in a uniform shape, racking preparing surface of wall, complete in all respect.

6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand)

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :25mm thick

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joint etc. complete fine finish :20mm thick.

Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish : 12 mm thick

Add extra item No. 12.1 to 12.12 for plaster done over ceiling.

Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on New work including preparation of base with primer, putty, lippy etc complete in all respect.

Providing and applying superior quality wall painting with Velvet touch emulsion paint of approved brand and manufacture to give an even shade with putty and preparation of surface applying with the help of paint roller the work complete in all respect as per direction of Engineer-in-charge. New Work Three or More coat

Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect New Work

Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect. Old Work

Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat including scaffolding and safe provision Roller Finish av. thickness 400 to 500 microns.

Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: New work (Two or more coats applied @ 3.84 kg/10 sqm).

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : Old wood work (One or more coats).

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : New wood work (two or more coats)

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : Old steel work (One or more coats).

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : New steel work (Two or more coats).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work.

Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work.

Polishing on wood work with ready mixed wax polish of approved brand and manufacture : Old Work

Providing and laying water proof, heat proof and acid proof Glossy polymer NUSHAR’s wall laminate (putty) compound which is in paste from. After cleaning the existing surface with wire brush or steel grade emery paper and wash properly and driver by use the compressor or air pump step 1 : Apply 1st coat of master coat over the plastered wall/wood and iron doors etc. then apply 2nd coat after drying completely. 1st/2nd coat (Drying period 1-2 hours). Steps 2 : The third and fourth coat of wall laminate (putty) should be applied for glossiness and leveling purpose. Final coat to cure in 20-24 hours before use. After curing the surface should be rubbed with emery paper of no. : 400, 800 and 1200 for high gloss finish.

Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished seamless type tubes.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Ordinary rock

Filling of sunk portion of roof with Earthen pots of required height including filling voids with 1 : 2 : 4 light concrete, using brick bats complete leveling and dressing the surface by 50 mm thick cement concrete 1 : 2 : 4 as per specification.

Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand

Filling in plinth with locally available good earth under floors including watering ramming consolidating and dressing complete including cost of Locally available good earth

Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 5 mm

LABOUR charges for repair to door / window without using any MATERIAL such as applying randha (finishing) tightening of bolts & screw etc.

Add. Extra over Item No. 8.6 for Repair of Doors including Removal and Replacing of damaged wooden Pannel, Shuttring Ply, CP/Steel oxidised Fitting etc. Jali. (2622 @ 35%)

Add. Extra over Item No. 8.6 for Repair of Doors including Removal and Replacing of damaged wooden Pannel, Shuttring Ply, CP/Steel oxidised Fitting etc.Panals. (2966 @ 35 %)

Provinding and laying of Paver Block as per IS 15658 : 2006 (Indian standerd for Precast concrete block for Paving -specification) and IRC :SP:63-2004(guidelines for the use of interlocking concrete blockPavement) (from BIS approved manufactrers. M-30, 50 mm thick to be used in non traffic areas like building Premises,monument Premise, land scapes, Public gradens/Park, domestic drives,paths and patios, Embankment slopes, sand stabilization Area etc.(As per table 1 of IS 15658:2006

Repair to cement plaster in cement mortar 1 : 6 (1 cement : 6 fine sand) including removal of old plaster in regular shape and white or colour washing.

Repair to damaged cement plaster of stone chajja with CM 1 : 3 of required thickness on top & bottom as per existing pattern and making patta etc complete up to three floor level as per direction of Engineer in charge including all necessary scoffolding etc

Repair of door, window shutters including cost of MATERIAL and LABOUR for change of damaged : Wire Gauge 14 mesh x 24 gauge Add Extra over item No. 9.31 if Stainless Steel wiregage 14 Mesh x 24 gaugewith aluminum beading/Channel is used

Repair to stone masonary in cement sand mortar 1:6 with old and new stone.

Providing and fixing Nigeria / Ghana /Ivory Coast Teak wood grade-I mouldings and beadings in droos and windows size :-50x12 mm

Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone 25 to 30mm thick.

Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. Add Extra if I/rail section is used.

Random rubble dry stone Kharanja under floor.

Providing and laying water proofing treatment with thermal insulation having thickness of 2.5 -3.0 mm over the existing R.C.C. roof by as per direction and satisfaction of Engineer-in-Charge and consisting of : (i) Cleaning and washing of the existing roof including removing of loose material from the surface of cracks. (ii) Widening and deepening of cracks to fill the approved Crack filler as per direction of Engineer in charge. (iii) Application of one coat of approved sealing compound approved by Engineer in charge with following specification or equivalent compound @ 0.17 litres per square meter with required brush as per direction of Engineer in charge. (iv) Application of the mesh approved by Engineer in charge (made up of Glass Fiber , Woven Structure of Leno make , reinforcing with alkali resistant coating having 10x10 mesh size, weight/sqm is 90gm to 120 gm and of 0.25 mm thickness including Resin content (%) : 18% ) or equivalent and then application of coat of sealing compound approved by Engineer in charge with specifications as narrated above , without use of water @ 0.33 litre per square meter with brush and drying of surface for 24 hours as per direction of Engineer in charge.

(v) Application of one base coat of water proofing compound as per direction of Engineer in charge @ 0.75 kg per square meter with adding sufficient water to make the paste consistent as per direction of Engineer in charge. Then drying the surface for 24 hours and then application of final coat of water proofing compound @ 1.25 kg per square meter with adding sufficient water to make the paste consistent with trowel and making of square size 300 mm x 300 mm if required as per direction of Engineer in (vi) Application of one coat of water repellent compound as approved by Engineer in charge @ 0.3 litres per square meter with soft brush complete in all respect up to satisfaction of Engineer-in-charge. (vii) The Contractor has to complete the work as per specification narrated above. The work should execute the work upto satisfaction of engineer in charge. Also the contractor has to check & maintain the treated roof for 5 years including the water tightness & thermal insulation by decreasing temperature in the range of 8-10 degree c during peak summers from surroundings and maintain room temperature during winters.

Dismantling tar felt over roofing complete including stacking of serviceable MATERIAL and disposal of unserviceable MATERIAL within 50-meter lead.

Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.

Double Syphonic European W.C. with mounted W.V.C. flushing cistern of 10 litre capacity complete with all necessary internal fittings with Hydraulic seat cover.

Providing & Fixing Concealed cistern with Floor mounting frame and flush plate of superior quality and approved sample by Engineer-in-charge.

P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 630 mm x 500 mm dia for counter top

Providing & Fixing premium qulaity WVC Wash basin with C.I. brackets duly painted & 32 mm C.P. brass waste coupling of approved make with PVC waste pipe complete. Size 550 mm x 400 mm dia for counter top.

P. & F Squatting Pan (Indian type) white glazed vitreous china 1st quality W.C. Pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest.) Size 580mm

P & F Automatic Flushing Cistern of first quality (IS : 774 mark) of approved make fitting, siphon with copper tube, C.I. brackets complete including cutting and making good the wall. WVC (as per IS : 2556) 10 litres.

P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.

P& F waste Pipe with all fitting. P.V.C with C.P nut 32 mm.

P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick commercial ply base fixed to wooden screws & washers. Size 600 x 450mm x 4 mm thick.

P&F Looking Mirror 5mm thick of approved make with ornamental frame size 50x12 with 6mm Ply Board on Back Side Complete as per approved sample

P & F Toilet Shelf of approved quality/make: W.V.C. (I.S.: 2556 Mark) Size 300mm.

P & F Towel Rail or Ring of approved quality/make: C.P. brass Towel Rail elbow type with concealed screws size 450mm (Heavy duty).

P & F Liquid Soap Container with brackets complete of approved make: C.P. brass.

P & F Soap Dish or Tray of approved quality/make. C.P. brass heavy and superior quality.

P & F Tooth Paste & Brush Holder of approved quality/make:C.P. brass (Heavy and Superior quality)

P & F Bottle Trap of approved make :C.P Brass 32 mm

Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI

Swan neck pillar cock 15 mm nominal size

Long body Bib Cock 15 mm nominal size

Two way Bib Cock 15 mm nominal size

600 mm long towel rail

Revolving type towel ring

Soap dish

Double coat hook

Paper holder

Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete

P & F Toilet Paper Holder with rod of approved quality/make:C.P. brass heavy & Superior quality.

P & F Twin- peg of approved quality / make C.P. brass (heavy)Superior quality

P & F C.P. Health Faucet with 1Mtr. Long Tube & Hook of approved make and heavy as per direction of Enginner-in-Charge

P& F waste Pipe with all fitting P.V.C with C.P nut 32 mm

Providing & fixing C.P.flange for 15mm dia taps.

P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore

P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore.

P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:750 gm. 20 mm nominal bore.

P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt. Not less than 300 gm,15mm.

P & F Divertors of superior quality and approved make:C.P. brass Tip-tone divertor bath spout with mixing valve.

P & F Flush Valve (Hydraulic) with level complete (IS : 9758 Mark) of approved make : 25mm nominal bore.

P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked)

P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 450mm.

P & F Shower arm 15mm dia of approved quality/make. size 300mm.(-do-).

P & F Bath Shower of approved quality/make.. C.P. brass of Heavy & superior quality, revolving with adjustable key 150mm.

P & F Gun-metal Non-return Valve or Check Valve (IS :Make) of approved make, superior quality:25mm nominal bore.Vertical

P & F Gun-metal Non-return Valve or Check Valve (IS :Make) of approved make, superior quality:25mm nominal bore. Horizontal

P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make :

(-do-) concealed 25mm nominal bore.

(-do-) Half-turn exposed 25mm nominal bore.

P & F foot valve of superior quality and approved make with fittings : Brass 25 mm.

P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 750 litres capacity.

P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity.

Hoisting Charges for each floor : For items 2.26.1 to 2.26.4.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,). 20mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,). 25 mm nominal outer dia pipes.

Labour Charges for Removing & Refixing the water Storage Tank of all sizes and including all Necessary fitting complete in all respect as per approved sample and direction of engineer in charge.

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia.

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.160 mm dia.

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Coupler (socket), 110mm dia

Coupler (socket), 160 mm dia

Socket plug 110 mm Dia

Bend 87.5 Dg., 110 mm dia

Bend 45 Dg., 110mm dia

Door Bend (Left & Right), 110 mm dia.

Pipe Clip 110 mm Dia.

W.C. connector with lipring 110 mm Dia.

W.C. connector bent type, 110mm dia

Plain Tee, 110mm dia

Door Tee 110 mm Dia.

Nahni Trap with Jali 4”

Vent Cowel 110 mm dia.

Offset, 110mm dia

Supplying and fixing Ferro- cement cover with C.I. frame for chambers & man holes of size. 500mm dia 12 Kg.-do-15 MT centre point load (medium duty).

Construction of Open Surface Drain with 112mm thick brick masonry in CM 1:4,110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing : 150mm drain,225mm Av. depth.

Removing and re-fixing of wash hand basin including all necessary fittings.

P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make

LABOUR charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap.

LABOUR charges for removing and refixing of urinals (all type & sizes) including all necessary fittings.

P& F waste Coulping with fittings of approved quality /make:C.P Brass 32 mm dia

P& F waste Coulping with fittings of approved quality /make:SS 125 mm

Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame.

Deduct for using brick work 230 mm thick in place of 300 mm thick stone masonry

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr..)

Wiring of twin control light/Call Bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tles, Hot Dipped Galvanized M.S Modular box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A two way Modular switch, Modular plate with grid plate, screws, making connections, testing etc. as required. Medium point (up to 6 mtr.)

Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. On board

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr..)

S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. 25 mm

Supplying and drawing FR PVC insulated & unsheathed flexiable copper conductor ISI marked (IS:694) of 1.1 KV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 1 x 1.5 sq.mm

2 x 1.5 sq.mm

1 x 2.5 sq.mm

2 x 2.5 sq.mm

2 x 2.5 sq.mm + 1 x 1.5 sq.mm

2 x 4.0 sq.mm + 1 x 2.5 sq.mm

2 x 6.0 sq.mm + 1 x 2.5 sq.mm

Supplying and drawing PVC jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam PE dielectric coaxial cable of approved make in existing surface or recessed conduit/casing capping including making connections as required.. RG - 6

Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or recessed Unarmoured Telephone cable in existing surface or recessed conduit/casing capping.. 4 pair

Supplying and fixing of Power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.

Providing & Fixing metal clad industrial plug top & socket unit with pin and sleeve typecontact on porcelin/bakelite base in sheet steel enclosure (without MCB) including making connection with lugs, testing etc. as required.Single Phase (Three Pin). . 32 Amp

Providing & Fixing ISI marked 6 Amp bakelite batten/angle holder including making connection testing etc. as required.

P & F Follwing modular accessories made out of unbreakable and fire retardent poly carbonate with silver contacts including making connections testing etc. as required

6 A one way switch

6 A Two way switch

6 A Bell Push Button

16 A one way switch

6A 3 pin shuttered socket

16A 6 pin shuttered socket

RJ-11 telephone jack single two line

RJ-45 computer Jack with shutter

T.V. Coaxial Socket

5 Step Fan Regulator 2 Module

Blanking plate

P& F following size mounting grid plates with cover plates 1/2 module

3 module

4 module

5/6 module

8 module

10/12 module

P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required. 1/2 module

3 module

5/6 module

8 module

10/12 module

Providing & fixing 240/415 Volt MCB of breaking capacity not less than 10 KA (B/C/D tripping characteristic) ISI marked IS 8828(1996)/ conforming to IEC 60898 in existing board/sheets including making connection with lugs, testing etc. as required. Single Pole MCB, 6 Amp to 32 Amp rating

Triple Pole & Neutral MCB, 6A to 32 Amp rating

Triple Pole & Neutral MCB, 40A to 63 Amp rating

Four Pole MCB, 40 Amp - 63 Amp rating

Providing & fixing recessed/ Surface mounting heavy duty horizontal type sheet steel distribution boards phophatised/ powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB terminations with copper lugs, testing etc. as required. Double door (Three Phase), 8 Way.

Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.

S & Laying following size Earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG Copper Wire

Providing and laying PVC insulated & PVC sheathed armoured cable of 1.1 KV grade with aluminium conductor of IS:1554 Part-1 of Group2 of approved make in ground as per IS:1255 including excavation of 30 cm X 75 cm size tranches. 25 cm thick under layer of sand IInd classes brick covering, refilling earth, compaction of earth, making necessary connection testing etc. as required of size.

16.0 Sq. mm. 4 Core

25.0 Sq. mm. 4 Core

70.0 Sq. mm. 3.5 Core

Supplying and making one end termination with heavy duty single compression brass gland SIBG type aluminium lugs duly crimped with crimping tool PVC tape etc for following size of armoured PVC insulated & PVC Sheathed/ XLPE aluminium conductor cable of 1100 V grade as required of size

4 Core x 16 Sq.mm

4 Core x 25 Sq.mm

3.5 Core x 70 Sq.mm

P & F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light, integral driver, 2000 luman + 5% tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 K ANSI, CRI 80, driver efficiency >85%, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full load/ 230 volt AC.

P & F of IP20 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Downlight with dle cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external BIS certified 2.5 KV surge protected driver having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of ~ 100 1m / watt and life time of minimum 35000 Burning Hours with 70% of intial Lumen maintaned, CCT 30000K / 40000K / 60000K , maximum power consumption should not more than the specified rating and Fixture shall be of CEcompliance. Surface Mounting, LED Downlight 12 Watt.

Recessed Mounting. LED Downlight 6/7 Watt.

Recessed Mounting, LEDDownlight 9/10 Watt

P & F energy efficient / energy saving 9 Watt IP 20 LED Bulb cool white, in existing holder / fixture as required, minimum 900 Lumen output, 25000 burning hours, CCT 5700 K or 6500 K ( as per direction of Engineer incharge), ANSI, Lamp efficacy minimum 100 lumen/Watt, CRI 80, Driver efficiency >85%, PF 0.95 at full load/ 230 volt AC.

P & F of 36 Watt IP 20 LED 2'x2' fixture, Recessed / surface type, having efficacy of not less than 100 lumen / watt, made out from CRCA housing and with high purity /transmisvity duffuser for uniform light distribution high efficiency driver electronics and in compliance to IEC standard (integral with light fixture), life time of more than 50000 burning hours, CCT 6000K (minimum), CRI>80 driver maintaining PF>0.9

P & F energy efficient / energy saving direct fit (Retrofit) composite self ballasted compact fluorscent lamp (CFL) with PF >0.85 in existing holder / fixture as required. 11/13 Watt

P & F of capacitor start, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required. 400 mm sweep(Oscillating type)

P & F 1200mm sweep BEE 5 star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:L979, I/p 50 watt at max speed & 230 volt, air delivery > 210 CMM, speed > 330 RPM with down rod upto 30 cm with 3 x 1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required

P&F of Double ball bearing, capacitor start single phase metallic blade Fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required. 225 mm sweep.

P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan, IS:2312 marked in existing opening including making connections testing etc. as required. 300 mm sweep (900/1400 RPM)

P & F of Gravity Louver shutter of superior quality made out of PVC including cost of nuts, bolts, etc as reqd.. Up to 380 mm size

P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required.

P & F of 4 star rated vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloy connection,testing etc. as required.. 15 Ltr.

Supply, Fixing and testing of following capacity wall mounted stablisers having output voltage variation from 200 V to 250 V(+/-5%) with input voltage variation from 170 V to 260 V, time delay facility from 2 to 4 minute and high cutoff at 270 V with providing of 16 Amp plug top making connection etc complete in all respect. 4 kVA.

Making hole in stone masonary/ RCC with core cutter for accomodating refrigerant pipe/ drain pipe for split/ cassattee/ ductable AC . 50mm to 150mm.

SITC of Interconnecting refrigerant pipe work with closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications including chase cutting, supports etc. as required. 12.7 mm

S & F of rigid CPVC (20mm) drain piping of 6 kg/ cm2 with 6mm thick nitrile rubber insulation.

S & F of FR PVC insulated & sheathed 3 core flexible copper conductor ISI marked (IS:694) of 1.1 kV grade of following rating:. 4.0 Sq.mm.

S & F of FR PVC insulated & sheathed 3 core flexible copper conductor ISI marked (IS:694) of 1.1 kV grade of following rating:. 6.0 Sq.mm.

Supply & fixing MS powder coated stand suitable for 1.0/1.5/ 2.0 Tr outdoor type of Split AC.

Providing & fixing TP&N 415 Volt side handle operated double break fuse unit in sheet steel enclosure confirming to IS: 13947 P-III and IS: 4064 (W/O HBC fuses) including making connections with suitable lugs, testing etc. as required. 200 Amp rating.

Providing & fixing bolted type/ Din type HBC (High Breaking capacity) fuse link of 80 KA breaking capacity, confirming to IS: 13703 in the existing fuse base, fuse switch unit etc of following type and . Offset tag type. 160 Amp to 200 Amp.

Providing & fixing Bus-Bar Chamber made out of aluminium or wrougt aluminum alloy suitable fro 100 Amp capacity housed in sheet metal box made out from 1.2 mm MS sheet front openable, Bus-Bar fixed on insulators at approved spacing including making connections etc. as required. 450 mm long, 4 strip.

Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessorry tools for punching, stripping, crimpping and testing required.

Supply , Installation, Testing and Comissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS chasis , powder coated Modular Patch Panels with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in Existing Communication Rack along with necessory connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps. 24 Ports.

Supply , Installation and Testing of 4 pair , 100 Ohm, 24 AWG , Cat 6 UTP, flexible , Double ended Patch Cords along with 2 No of RJ 45 connectors with strain relief boots as per TIA /EIA 568 B.2-1 Specifications. 1 Mtr/3 ft

Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, swing handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable. 15 U(44 mm ) wall mounted

Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.

Providing & Fixing metal clad industrial plug top & socket unit with pin and sleeve typecontact on porcelin/bakelite base in sheet steel enclosure (without MCB) including making connection with lugs, testing etc. as required. Single Phase (Three Pin) 32 Amp

Providing & Fixing ISI marked 6 Amp bakelite batten/angle holder including making connection testing etc. as required.

Raghubala Const. Co.