Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC | ₹3.6 L Quoted ₹2.7 L | L1 | Accepted-AOC Agreement Signed |
| 2 | L2₹3.0 L+₹32,286.68 (12.0%)Rejected-Finance | ₹3.0 L+₹32,286.68 (12.0%) | L2 | Rejected-Finance Rejected due to Highly Quoted |
| 3 | L3₹3.1 L+₹40,758.30 (15.2%)Rejected-Finance | ₹3.1 L+₹40,758.30 (15.2%) | L3 | Rejected-Finance Rejected due to Highly Quoted |
| 4 | L4₹3.3 L+₹58,901.39 (22.0%)Rejected-Finance GRAM DHATURIYA DISTRICT RAJGARH MP | ₹3.3 L+₹58,901.39 (22.0%) | L4 | Rejected-Finance Rejected due to Highly Quoted |
| 5 | L5₹3.3 L+₹58,937.75 (22.0%)Rejected-Finance | ₹3.3 L+₹58,937.75 (22.0%) | L5 | Rejected-Finance Rejected due to Highly Quoted |
Tender Value
₹3.6 L
EMD Value
₹7,300
Closing Date
5 Jun 2026, 6:00 pmClosed
Executive Engineer PWD B and R Division Satna
Executive Engineer PWD B and R Division Satna
Special Repair work on Court Room No. 18 and 19 at District Court Civil Line Satna, Under Sub Division Satna
2026_PWDRB_508477_1
05.02-SATNA-2026-27
Open Tender
Civil Works - Buildings
Percentage
60 days
SATNA
2 documents required · 2 mandatory
₹2,000
₹7,300
19 Jun 2026
21 May 2026
8 Jun 2026
22 May 2026
5 Jun 2026
22 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead:
15.16.1) Of sectional area below 40 square centimetres. | 332.4 | Sqm | 4 | ₹1,329.6 |
| 2 | Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. | 27.3 | Cum | 672 | ₹18,345.6 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :
4.1.2) With 40mm nominal size graded stone aggregate.
4.1.2.1) M-15 - Grade concrete | 4.21 | Cum | 4,403 | ₹18,545.44 |
| 4 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 270 | Kg. | 582 | ₹1,57,140 |
| 5 | Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours & shades, 1st quality/ premium quality in skirting, dado and wall lining laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete
11.79.1) In light shade glossy/ rustic /stain finished
11.79.1.1)(a) Size 600X600 mm thickness 9-10 mm | 59.2 | Sqm | 1,093 | ₹64,707.79 |
| 6 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:
9.6.5) Ply wood 7 ply, 9 mm thick :
9.6.5.1) Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. | 2.4 | Sqm | 1,861 | ₹4,466.4 |
| 7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge.
External Work
18.7.1) 15 mm nominal outer dia .Pipes. | 15 | Mtr. | 122 | ₹1,830 |
| 8 | 18.7.2) 20 mm nominal outer dia .Pipes. | 15 | Mtr. | 141 | ₹2,115 |
| 9 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931and weighing not less than 400gm, 15 mm nominal bore. | 3 | Each | 840 | ₹2,520 |
| 10 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. | 3 | Each | 1,155 | ₹3,465 |
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
TenDoc.pdf
Tender Documents • 34.23 MB
BOQ_613744.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .