SPL REPAIR TO BLDG NO P 15 AND P 16 TCP AREA AND PROVN OF GUARD BAR IN WINDOWS OF P1 DIV AT PALAMPUR MIL STN

Amount

Dismantling of old rusted plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)

Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed.

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410-W (Grade E-250) quality A complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed.

Dismantling of wall & ceiling boards (fiber, pulp, insulation etc) or insulation boards /slabs /blankets any thickness, including cover fillets complete all as specified and directed.

Providing and fixing tiled false ceiling of size 595x595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanized steel section (galvanized @ 120 gms/sqm, both side inclusive) consisting of 3600mm long main "T" runner size 24x38mm and 0.30mm thick, 1200mm long cross "T" of size 24x25mm and 0.30mm thick, 600mm secondary cross "T" of size 24x25mm and 0.30mm thick and PPGI wall angle of size 24x24mm and 0.4mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main "T" runners are then suspended from ceiling using GI slotted cleats of size 27x37x25x1.6m fixed to ceiling with 8mm dia and 45mm long dashfasterners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8mm spaced at max 1200mm center to center along main T and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent = wall, then 1200mm long cross "T" is interlocked between the main "T" at 600mm center to center to form a grid of 1200x600mm and then secondary cross "T" of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally whitecoloured Gyproc 9mm thick Dew Drop/Granular tiles of size 595x595 having foil on back side & PVC paper on front side wrapped around edges to be placed in grid complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

M&L 50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/footpath finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster including tiles of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick wall/stone masonry in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick wall/stone masonry in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of walls and applying two coats of distempering walls with distemper oil emulsion and applying plaster of paris putty 1mm thickness over newly plastered wall surfaces including preparation of surfaces even and smooth complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of walls and applying two coats of distempering walls with distemper oil emulsion and applying plaster of paris putty 1mm thickness over plastered wall surfaces including preparation of surfaces even and smooth complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L preparing old surface of wall/ceiling and applying two coats of white wash on old decorated surface complete all as specified and directed.

Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.m each, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.

S&F factory made Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and providing one shop coat of primer and taring back side of frame, complete all as specified and directed.

S&F factory made Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and providing one shop coat of primer and taring back side of frame complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with alumininium wire staples, complete all as specified and directed.

M&L preparation of new surfaces of steel of any description, over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

M&L preparation of old surfaces of steel of any description, over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over existing surface complete all as specified and directed.

Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality pin headed/paling to aluminium frame of partition etc. fixed with rubber gasket & aluminium powder coated snap beading etc. complete all as specified and directed.

S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 ,complete all as specified.

S&F 100 mm size aluminium butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised, type B-21 complete all as specified and directed.

S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, cast type, anodised complete all as specified and directed.

S&F 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 300mm, ordinary door springs including roller and roller plate complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non-skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, complete all as specified and directed.

S&F 20mm thick granite (green colour) stone machine cut, in kitchen slab laid over cement screed and jointed with cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-1 (20 mm graded stone aggregate) as in leveling course of flooring or levelling course of roof etc, complete all as specified and directed

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mmx10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing shown in SSR Part-II, complete all as specified & directed.

Dismantling CI/PVC drain pipe 75/100mm bore jointed in cement mortar fixed in trenches and taking out of trenches removing where directed complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to walls/ laid in trenches etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction, (single T) with oval access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction, (double T) with oval access door complete all as specified and directed.

S&F 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore dia, complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.(inner girth only measured)

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling complete all as specified and directed.

S&F vitreous china wash down Europian water closet pan (Padestal Pattern), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valve less symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle including brackets & 32 mm size PVC flush pipe, complete all as specified and directed.

S&F in repairs PVC connection 15mm size, 600 mm long with PTMT nuts complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed.

S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs stop valve/angle valve, cast copper alloy, fancy type, chromiun plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.

S&F in repairs concealed type with wall flange, stop valves 15mm bore, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 20mm bore gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete all as specified and directed.

S&F swivel shower of PTMT any colour for fixing with shower arms 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weight 40gms) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specifed and directed.

Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed.

S&F steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

S&F steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

Cutting chase, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing,steps, cills, sunshades, shelves,lintels,etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting exc. 10cm but not exc. 20 cm girth complete all as specified and directed.

S&F 18/19mm thick prelaminated WPC board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F wooden lipping complete all as specified and directed.

M&L 2nd class softwood plain fillets, square/rectangular, wrought face of sectional area not exc 3 Sqcm, secured with nails complete all as specified and directed.

S&F 40 mm dia cupboard knobs fixed with nut, screw and washer of brass,bright finished complete all as specified & directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330m x 160mm complete all as specified and directed.

S&F Vitreous china, wash hand basin, (white) of size 550mm x 400mm including brass CP waste coupling 32mm size with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified and directed.

S&F 30mm continuous (piano) hinges, mild steel bright finish or electrogalvanised complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in filling under sunken floors complete all as specified and directed.

M&L 15mm thick (average) screed bed/plaster in cement mortar 1:3 in order to maintain proper slope and base in sunken protion of WC & floor trap, mixed with water proofing compound as per manufacturer's instructions finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC and polymeric membrane shall be measured and paid separately)

S&F High performance two component brushable elastomeric poly urea waterproofing coating cold applied brush applied ultraseal BA or approved equivalent (in sunken portion of WC & floor trap) liquid membrane with white in colour with a elongination of 500% and tensile strength of 5 N/sq mm @ DFT 1mm as per ASTM D 2370.73 % solid content, shore A hardness of min 70. The system include final base preparation, epoxy primer application @200-250 gms/sqmt depending upon the surface porosity and applying home shild ultraseal BA or approved equivalent in two coats at 1.5 kg sqm providing 1.2 mm DFT etc, complete as per manufacture specification.

M&L preparing the surface of roof slab by brushing with wire brashes for removal of loose materials etc and sweeping with brooms, gunny bags and finally remove dust by compressed air by compressor complete, complete all as specified and directed.

M&L applying neat cement slurry with 3Kg of cement slurry per sq.m mixed with liquid water proofing compound on surfaces of roof and plastering 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instructions and finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L one coat of cold bituminous primer to the plastered surface @ 0.40 litres per sqm conforming IS-3384 and laid a layer of APP polymeric membrane 3mm thick (minimum) weighing 3.0 kg per sqm reinforced with polyster non woven fabric (weight not lass than 150gm/sqm) by toarch application method complete all as per manufacturer instructions and sealing all the over lap shall be minimum 75mm in length side and 100mm on with side. complete all as specified and as directed

M&L PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in roof kerbs, mud stops, roof padding etc using water proofing compound complete all as specified and directed. Note: WPC compound measured and paid separately

Supply only liquid water proofing compound complete all as specified and directed.

M&L coloured chequered cement concrete tiles, machine pressed, factory made of size 300x300x25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F PVC coated mild steel conduit pipe 25mm dia (Drapery rod) with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door/windows, each opening n exc 1.50 mtr, contained with a pair of clamps and ap pair of side ornamental attachments complete all as specified & directed.

Cutting holes in brick walls exc half brick but not exc one brick in cement mortar or cement lime mortar and stone walls built in lime mortar in mud mortar (depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall) for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F rolled mild steel sections like angle, channel, flat etc as inframed work such as grills, gratings,etc,with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framed work of water tanks and similar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge.

S&F rolled mild steel bands,straps,supports or stays for rainwater,ventilating pipes,including bolts,if required; hooks(stays),heavy,for large gates,hook and pintle hinges;large hasps and staples;chains;hand made sliding bolts;clamps;hold fasts;wall ties;hooks for hanging fans;plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three ways straps, plate washers and similar articles conforming to Fe-290 Gde E-165 complete all as specified & directed.

Rendering 10mm thick plaster on brick/stone masonry or other than fair faces of brick wall in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces of wall complete including preparation of surfaces of walls complete all as specified and directed.

M&L applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces of wall complete including preparation of surfaces of walls by complete removal of existing treatment complete all as specified and directed.

M&L treating small articles such as stop, covers, gully gratings, holdfasts, end of posts, backs of chowkhats etc. area not exc 0.1 sqm each, preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described and treated with tar or coal tar black paint complete all as specified and directed.

M&L welding n exc 6mm thick metal, exc 2.5cm but not exc 5cm in length, complete all as specified and directed.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed.

M&L for replacement point wiring with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including Modular GI sheet Metal flush boxes of anyway (as per site requirement) for mounting switches, sockets, regulators etc for fixing one light/fan/bell point/fan/exhaust fan controlled by one 5/6 A switch and making good disturbed surfaces with CM (1:4) to match with the existing whitewash color surface complete all as specified and directed.. Notes : (a) Wiring shall be done by using proper colour coding.(b) Earth wire shall be of green colour.

Description all as per serial item No 102 here-in-before but one 5pin, 6 Amp socket outlet on same board complete all as specified and directed.

Description all as per serial item No 102 here-in-before but one 5pin, 6 Amp socket outlet independent complete all as specified and directed.

Description all as per serial item No 102 here-in-before but for one 5 pin socket outlet 16 Amps on independent board with cables 2.5 sqmm for phase and earth wire of size complete all as specified and directed.

All as per the description of serial item no 102 above controlled by two 2-way switches, with cables 1.5sqmm size all as specified and directed.

S&F Modular Switch two way 6 Amp, one module 240 volts ISI marked complete all as specified and directed.

S&F bell, AC 230 Volts, single pole complete all as specified and directed.

S&F modular bell push 6A 1 module 240 volts ISI marked complete all as specified and directed.

S&F modular Switch one way 6 Amp, one module 240 volts ISI marked complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F Modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed.

S&F Modular Fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed.

S&F Modular white cover plate 8M complete all as specified and directed.

S&F Modular white cover plate 6M complete all as specified and directed.

S&F Modular white cover plate 3M complete all as specified and directed.

S&F Modular white cover plate 1M complete all as specified and directed.

S&F Single pole and neutral enclosure with 1 two pin and earth plug and a socket complete with one single pole MCB, 20 Amp, 240 volts ISI marked complete all as specified and directed.

S&F ceiling rose, 3 terminal surface type complete all as specified and directed.

S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 10 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S&F street light bracket made out of 32 mm dia GI light grade tubing not less than 1.5 Mtr long bend to shape including pole clamps made out of 40 x 5 iron strip and nut bolts and washers, complete all as specified.

Supply and fixing LED street light fitting 50 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 10.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding.

M&L distribution board sheet steel powder coated for MCB with rated bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

S &F in replacement of SPN 40 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F in replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F factory made CRCA sheet powder coated double door panel board 2mm thick, of size 100X100X20 cm, with Aluminium bus bar, wall mounted type partially grouted in wall with locking arrangement, handle and making good disturbed surface as well as matching with existing whitewash color/surface and including provn of following and connection all as specified and directed :- a) TPN 63A, 4Pole 415 Volts, C series-01Nos (Incoming) b) MCB SPN, 40A, 230 Volts-05 Nos (Outgoing for each qtr and 1 common stair case light point) c) Fixing only existing old energy meter including connection complete all as specified and directed.

Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm thick buried directly under ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level ,connected to galvanised earth lead wire 4.0mm by means of bolts, nuts, check nuts, washer including test point by means of bolts, nuts, check nuts, and washers of galvanized iron and connected to main switch / control board up to 7.5 metre away from earth electrode and including GI pipe light grade 40mm bore protection pipe & necessary excavation and earth work in any strata, PCC chambers in PCC 1:3:6 type B1, RCC 1:2:4 type B1 cover slab 50mm thick with 8mm dia TMT bars at 140mm C/C both ways, with lifting handle, watering pipe of GI medium grade 40mm dia, wire mesh, funnel, lugs and charcoal, salt etc all as applicable and as per plate No 3 of SSR Part-I and all as specified.

Disconnecting/ Taking down Ceiling Fan/ Exhaust fan of any sweep removing and cleaning the dust properly, painting with same colour good quality synthethic enemelled paint after preparing surface for painting with existing color shade oiling and greasing of bearing including refixing and making the conection and testing complete all as specified and directed.

M&L cutting and taking out old burnout winding of any sweep ceiling fan/Exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete to entire satisfaction of Engineer- in- charge.

Disconnecting water heater and taking in safe custody/ refixing the same including fastner and making the conection and testing complete all as specified.

Disconnecting electronic meters temper proof LCD display and taking in safe custody and refixing the same with caliberation and cleaning and making the conection and testing complete all as specified and directed.

Supplying laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volta grade with stranded aluminium conductor of size 25 Sqmm , 3.5 core flat cable complete all as specified.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 mtr in depth for foundation laying of under ground cable erecting of pole stay not exc 10 sqm on plain and not exc 1.5 m depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in (soil ) including spreading, levelling, watering and well ramming in layers not exc 25cm in any type of soil complete all as specified and directed.

Removal of excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

M&L for sand cushioning to under ground cable with a layer of sand 8cm before laying the cable and 15cm after laying the cable (10cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.

M&L for sub class ‘B’ brick old size protection cover laid dry flat transversally along the length of cable on cushioning with width equal to the length of brick complete all as specified and directed.

Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wall/pole with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified and directed.

BHARDWAJ BUILDERS (BID ID -3304650)

Kulbir Singh Govt. Contractor (BID ID -3305880)