Repair to hard standing, fencing, footpath, retaining wall, gate and BR misc work at 7 C and D, MH, ASC, MES IB at Mil Stn at Pithoragarh under GE MES Pithoragarh

Amount

Demolition of (un-reinforced) cement concrete in ground floors and pavings not exceeding 15 cm thickness above or below ground level complete all as specified and directed.

Demolition of (un-reinforced) cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonary, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles and block walling complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, laid dry complete all as specified and directed.

M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in surface channels and drain complete all as specified and directed.

M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundation and mass concrete complete all as specified and directed.

M&L for Pre-cast cement concrete bonders (for stone walling), type B-1, 1:2:4 (using 20 mm graded stone aggregate) and setting in cement mortar 1:6, complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 but except stone complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, laid dry but except stone complete all as specified and as directed.

M&L for hand packing (any thickness) at back of walls with broken stone or boulders and raising or lowering to the required level complete all as specified and as directed.

M&L for PCC Type B1 1:2:4 (using 20 mm graded stone aggregate) as in copings, bed blocks including necessary form work etc complete all as specified and directed.

M & L for raised pointing to random polygonal rubble masonry uncoursed or brought up to courses in cement mortar 1:4 complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes, in any length for weep holes complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, type C-1, 1:3:6 (using 20 mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, including screed bed and removing rubbish off the premises complete all as specified and directed.

S & F Chequered cement concrete tiles 20 cm x 20 cm x 2cm thickwith grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles over and including screed bed 20mm thick in CM 1:6 as in floor complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm from Item No 10 complete all as specified and directed.

M&L for 75mm thick (avarage) cement concrete, type C2, 1:3:6 (using 20 mm graded stone aggregate) as in flooring to receive top layer of floor finish even and rough complete all as specified and directed.

S & F rubber moulded decorative disigned coloured machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Structural steel work of angle, channel etc., confirming to Fe 410 -W (Gde- E- 250)complete all as specified and directed.

Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in natural grond and making good the disturbed ground complete all as specified and directed.

Dismantling of fencing wire mesh any type complete all as specified and directed.

S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders, door, or gate of angle or other sections etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Mild round bars upto 10 mm, cut to length, bent to shape required, including cranking and fixed to chain link fencing for (Fe410-W Gde E-250) quality 'A' or Fe-290 Gde E-165), hooking ends complete all as specified and directed.

M&L Plain Cement Concrete 1:3:6, type C2, (using 40 mm graded stone aggregate), 75 mm thick, finished even and smooth with out using extra cement as in floor etc. complete all as specified and directed.

Demolition of (reinforced) cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L Precast cement concrete (reinforced) 1:3:6 type C1 (using 20 mm graded stone aggregate) for cover slab, shelves and similar work and set in CM 1:6 including formwork complete all as specified and directed..

M&L for Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Cleaning of blockage of weep holes of any type or any size in retaining walls by way of rodding and removal/ cleaning of mud, vegetation growth with rodding upto extreme end and making good the shape and size of weep hole with cement mortar in Cm 1:4 complete all as specified and directed.

Supply only chain link MS galvanised fencing any size and type complete all as specified and directed(Note- weight shall be measured by BOO as assemble by GE).

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and directed.

S & F Mild steel band, strap,support of stay for rain water pipes, including bolts, nuts if required, for large gate, pintel hinges, cleats, two & three way straps and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. complete all as specified and directed.

S & F Mild steel screw bolts(machine made) with haxagonal or squareheads and one end and screwed otherend or screwed both ends, each screws shall be fixed with necessary washers exc. 5 cm but n. exc. 10 cm long and 16 to 20 mm diameter of neck complete all as specified and directed.

M/s J P Traders

M/S Shahjee Fridge Service

SHAMSHER SINGH MAHAR

M/S GD Punetha Son