ADDN/ALTN TO 9 AFH, PROVN OF HIGH MAST LIGHTS AND CERTAIN MINOR WORKS AT AF STN HALWARA

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4.00 sqm each and removal from site complete all as specified and directed.

All as per Sl item No 2 above but area not exc 1.50 Sqm each

S&F Powder coated aluminium frame of any colour (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coating aluminium door shutters of any colour (Thickness of powder coating not less than 50 micron), aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F Powder coating aluminium window shutters of any colour (Thickness of powder coating not less than 50 micon), side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F Powder coating aluminium ventilator shutters of any colour (Thickness of powder coating not less than 50 micon), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Door closer Aluminium (Die cast) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .

S&F 9mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination &, fixed with screws to aluminium door complete all as specified and directed.

S&F anodised aluminium grill (anodised tranparentor dyed to required shade according IS : 1868/ with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @200 mm centre to centre including cutting the grill to proper opening size for fixing and operaton of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requried and direction of Engineer-in-charge

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description all as specified and as directed

S&F Anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm including hangers, cleats, fasteners complete all as specified and as directed.

S&F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, 60x60cm in size complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mmx450mmx6 to7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, laying of cables, erection of poles, struts/stays etc and getting out in soft/loose soil complete all as specified and directed.

M & L for sand cushioning with dry fine sand to under ground cable with thickness of sand 80 mm below and 150 mm above the cable and punning in the trenches complete all as specifed and as directed. Note: Punned thickness of sand shall only be measured and paid.

M&L for brick protection with sub class "B" bricks (old size) laid dry, flat in trenches over cable with longest dimension perpendicular to the axis of the cable complete all as specified and directed specified .

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 mtr and depositing the soil where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Excavation in post hole and getting out soft and loose soil, each not exceeding 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with around in layer n exc 25cm

M&L for cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in foundation filling and mass concrete bed plate etc complete all as specified and directed.

S&F mild steel plate 10mm thick Fe 410 W grade E250 quality B, (plain or chequered) channel, sqaure cut or notched (ordinary or counter sunk) forming holes, without any attachment etc complete all as specified and directed.

S&F steel work in tubler trusses, rafters, purlins etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 Grade St-240 complete all as specified and directed.

S&F framed work such as grills, grating etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters walk ways railings framework of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

M&L 1.00mm thick Plain black mild steel sheeting in stepped flashings (measured as the minimum rectangle from which the pieces can be cut

Mild steel bars 10mm dia and over TMT bars cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking bends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC type B-1, 1:2:4 (20mm graded stone aggregate) as infoundations, including rafts, footing, foundation beams, plinth beams bases for columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed. Note : Reinforcement bars shall be measured and paid seperately.

M&L for prepartion of new steel surfaces over 10cm width and girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

Supply, fabrication, errection, testing and commissioning of raising and lowering type 16 metre high galvanized Mast pole suitable for 9 (150w LED lights) lanterns symmertically fitting along with their control gear and having 3 mm section thickness, top dia 150 mm, bottom dia 340 mm, with 2/3 wire rope system and its accessories two point suspension system with stainless steel wire rope 6mm dia 97/19 gauge and double drum winch trailing cable (PCP EPR) galvanized lantern carriage arrangement suitable for mounting 9 luminaires symmetrically and lightening arrester spike, pully assembly, feeder pillar having ML-4 Rex modular timer switch Legrand make (Model No 003740 micro Rex 24 hrs) with cat part No. 625361, MCCB 100 Amps TP for automatic operation. The MAST shall have integral type power tool at the base compartment for its operation. MAST shaft shall be in two section hot dip galvanised inside and outside in single dip suitable for wind loading as per IS-875 part-3 including M&L for construction of suitable shallow foundation for high Mast with M-25 grade concrete considering the safe soil bearing capacity at site as 10 Ton/Sqm at 2 metre depth including provision of suitable size and number of foundation bolts alongwith nuts, washer, anchor plates and templates as per the drawing and specification of manufacturer of high MAST system which will be got approved for GE before execution, complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed by Engr-in-Charge.

S&F SPN DB 2 way complete all as specified and directed.

S&F MCCB 63 Amp 16 KA 4 pole complete all as specified and directed.

kartikconstructions

JINDAL AND COMPANY

M/S SANGA SINGH AND CO