REPAIR/REPLACEMENT TO SANITARY FITTING, TILING, PLINTH PROTECTION, PLASTERING AND CERTAIN B/R WORK FOR JCOS/ORS MD ACCN AT NAA UNDER GE (NORTH) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Dismantalling of cement concrete (unreinforced) in ground floors and pavings not exceedings 15 cm thickness (below or above ground level), complete in all respect as specified and directed.

Dismantalling of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete in all respect as specified and directed.

Taking down cement plaster of any thickness and description on brick/ concrete/ stone wall/ ceilings, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete in all respect as specified and directed.

Material and labour for 40mm thick PCC (1:2:4) type B1 (using 20mm nominal size, crushed and graded stone aggregate) as in hardstanding/flooring, finished the surface fair and even complete in all respect as specifified and directed.

Providing and laying 75mm thick cement concrete type C-2, 1:3:6 (using 40mm nominal size crushed and graded stone aggregate) and finished even and fair in base concrete complete in all respect as specifified and directed.

M&L for 18-20mm thick machine cut kota stone slab flooring of size not less than 500X500mm over and including 20mm thick cement mortar (1:6) screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for 18-20mm thick machine cut kota stone slab of size not less than 500X500mm in riser of steps, skirting , dado and pillar over 15mm thick cement mortar (1:4) rendering, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S & F for coloured glazed pre coated chequered cement concrete tiles of any shape and size, 20-25mm thick with grey cement with pigment,; set jointed and pointed in neat cement slurry with pigment in floors including over 15mm thick screed bed in CM 1:6 and dismantalling of existing tiling with screed bedding complete in all respect as specified and directed.

Providing and laying cement concrete in foundations, filling and mass concrete using 1:5:10 nominal mix type E-2 (using 40mm nominal size crushed and graded stone aggregate) complete in all respect as specifified and directed.

M & L PCC (1:2:4) type B-1 (using 20 mm nominal size crushed and graded stone aggregate) in coping, hold fasts or of similar items including necessary cutting, form work etc. complete in all respect as specified and directed.

M & L for brick work with old size sub-class 'B' bricks, class designation 75, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete in all respect as specifified and directed.

M & L for half brick work with old size sub-class 'B' bricks, class designation 75, built in cement mortar 1:4 complete in all respect as specifified and directed.

M & L for applying one coat of 85/25 grade hot bitumen @ 0.7 Kg per Sqm over a coat of bituminious primer @ 5 Kg per Sqm complete in all respect as specified and directed

S & F polythean film 150 micron, natural colour fixed with cold cut back adhesive Complete in all respect as specified and directed.

M & L for glazed ceramic coloured wall tiles of size area exc. 0.09Sqm and not exc. 0.16Sqm set and jointed in neat cement slurry and pointed with white cement with pigment to match the tile colour including 10mm thick rendering in cement mortar 1:4 including taking down of existing tile and bedding mortar complete in all respect as specified and directed.

M & L for ceramic coloured digital printed floor tiles of size area exc. 0.09Sqm and not exc 0.16Sqm set and jointed in neat cement slurry and pointed with white cement with pigment to match the tile colour including 15mm thick screed bedding in cement mortar 1:6 including taking down of existing tile and bedding mortar complete in all respect as specified and directed.

M & L for rendering/plastering 15mm thick in cement mortar 1:3 on faces of brick or concrete surfaces and finished the surface even and smooth without using extra with water proofing compound in sunkun floor complete in all respect as specifified and directed. (Water proofing compound shall be measured and paid under supply item only)

M & L for rendering/plastering 10mm thick in cement mortar 1:3 on faces of brick or concrete surfaces and finished the surface even and smooth without using extra with water proofing compound over chajja, coping etc complete in all respect as specified and directed. (Water proofing compound shall be measured and paid under supply item only)

M & L for rendering/plastering 15 mm thick in cement mortar 1:4 on other than fare faces of brick or concrete surfaces and finished the surface even and smooth without using extra cement complete in all respect as specifified and directed.

M & L for rendering/plastering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces and finished the surface even and smooth without using extra cement complete in all respect as specifified and directed.

M & L for preparation of old decorated plastered or unplastered surface of wall and applying two coats of white wash complete in all respect as specified and directed.

M & L for preparation of new unplastered surface of wall and apply three coats of white wash complete in all respect as specified and directed.

S&F in repair wire netting of galvanised steel wire 0.43mm dia of 1.18mm size of mesh fixed with tinned tacks of stainless steel wire staple and fixed with tinned tacks, or galvanized staples in wooden/steel sections including necessary new second class hard wood wooden beadings of existing shape and size or welding/ new nut and bolt required complete in all respect as specified and directed.

S&F in repair, 32 mm dia bore of pipe waste fittings, brass, chromium plated for glazed ware sinks, wash hand basin, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement including 32 mm bore dia PVC waste pipe complete in all respect as specified and directed.

S&F in repair Plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F 32 mm dia High density polyethylene pipes (HDPE) of pressure rating 6 Kgf/cm² fixed complete to walls, ceilings or in floors etc complete in all respect as specified and directed.

Supply & fixed in repair for the following items at any location, position etc. complete all as specified and directed.:-

15 mm dia bore, Pillar taps of CP fancy type high pressure screwed for iron pipe

15 mm dia bore, Bib tap std of PTMT any colour screwed, for iron pipe and fixed at any location, position etc

15 mm dia bore, fancy type Bib tap brass chromium plated screwed down, screwed for iron pipe or for brass ferrule .

15mm bore Angle valves CP fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions .

15 mm bore dia Stop valves CP, fancy type, , with long shank and cup (concealed type)

15mm bore dia stop valve of PTMT any colour high pressure screwed for iron pipe & fixed (min wt 15mm - 90gms).

20 mm bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min wt 20 mm-210 gms)

15 mm bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (mini wt 15 mm-142 gms)

15mm dia PVC Connection with PTMT nuts of length 450 mm long

15mm dia PVC Connection with PTMT nuts of length 600 mm long

200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed.

125mm long Aluminium anodised, handle cast type

But Hinges 75 mm, medium weight, cold rolled mild steel, and fixed (ISI)

PVC Waste pipe 32 mm dia

PVC Waste pipe 40 mm dia

Supplied and fixed in openings, solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, as per specification & drawing complete in all respect as specified and directed.

Supplied and fixed factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails. mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete in all respect as specified and directed.

Supplied and fixed in repair 10 liter capacity, PVC valveless, syphonic action type, low level cistern, capacity, white, with inlet ball valve, float and handle including brackets & flush pipe of polyethylene complete in all respect as specified and directed.

S & F 15mm bore GI tubes medium grade, galvanised with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting in concealed nature and taking down of existing pipe line complete in all respect as specified and directed

S & F 25mm bore GI tubes medium grade, galvanished with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting in sunkun flooor spout complete in all respect as specified and directed

S & F 20mm bore GI tubes medium grade, galvanished with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting chauging in concealed nature and taking down of existing pipe line complete in all respect as specified and directed

S & F in repair 15mm bore concealed long neck , CP finished stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete in all respect as specified and directed.

S & F PVC (SWR) nahani trap of 75mm outlet dia fixed with PVC 150X150mm size openable at center grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F 38mmX1.5mm thick PVC deviding strips, for flooring complete in all respect as specified and directed.

Supply and fixed in repair 15mm bore, cast copper alloy, CP finish, shower rose of size 125 mm dia and shower arm of cast copper alloy CP finished, fixed to iron pipe/fiitings complete in all respect as specified and directed.

S & F in repair white vitreous china squatting pan of size 580x440 mm,"ORISSA PATTERN" with new PVC 'P' or 'S' trap bedded in cement concrete (Exclusive flushing cistern and flush pipe) with integral foot rests complete in all respect as specifified and directed.

S & F in repair vitreous china wash down water closet pan (Pedestal pattern) white including plastic water closet seat , white closed pattern with flat bottom , new CI/UPVC 'P' or 'S' type trap and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete in all respect as specified and directed.

Taking down existing unservicable and S&F of new plate rack made out of stainless steel sheet of 0.5 mm thick with overall size 760 mm (H) x 900 mm (W) x 250 mm (D) with three shelves complete all as specified and directed.

S & F in repair 20mm dia bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete in all respect as specified and directed.

S & F PVC (SWR) bends with access door any radius 75mm bore complete in all respect as specified and directed.

S & F PVC (SWR) bends with access door any radius 110mm bore complete in all respect as specified and directed.

S & F PVC (SWR) junction single, (single T) equal or unequal 110mm bore pipe with access door complete in all respect as specified and directed.

S & F PVC (SWR) junction single, (single T) equal or unequal 75mm bore pipe with access door complete in all respect as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches 75mm bore complete in all respect as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed over wall 75mm bore including necessary pipe clamps complete in all respect as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches 110mm bore complete in all respect as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed over wall 110mm bore including necessary pipe clamps complete in all respect as specified and directed.

S & F PVC (SWR) 110mm internal bore cowl complete in all respect as specified and directed.

S & F PVC (SWR) 75mm internal bore cowl complete in all respect as specified and directed.

S & F in repair for 4mm thick sheet glass ordinary quality and glazing with oil putty in square complete in all respect as specified and directed.

S & F in repair for 4mm thick frosted/figured sheet glass ordinary quality and glazing with oil putty in square complete in all respect as specified and directed.

S & F in repair wash hand basins, vitreous China of size 550 x400mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32mm dia bore waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15mm bore dia fancy type CP finish Pillar tap, cast copper alloy with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed.

S & F in repair Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete in all respect as specified and directed. Make: Prayag, Shakti, Hindware, Cera

Supply only liquid water proofing compound complete in all respect as specified and directed.

S & F tubular towel rail, 20mm dia, D type, 60cm long between flanges cast copper alloy, CP finished complete in all respect as specified and directed.

Material and labour for preparation of newly plastered surface of walls and applying two coat of weather coat over 2mm thick wall care putty and a coat of primer including rubbing and all necessary preperation complete in all respect as specified and directed.

Material & labour for preparation of old decorated plastered surface of wall and applying two coats of oil bound distemper including one coat finished with spunge roller over a coat of alkali resistant priming paint over 2mm thick (in two layers), wall care putty including complete removal of existing treatment complete in all respect as specifified and directed.

M & L for writing letters or figures (block roman, Italic or Indian) using synthetic enamel paintof 30cm high over byuilding on square or round base painting complete in all respect as specified and directed.

Demolition and breaking up drain pipes of any dia (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar complete in all respect as specified and directed.

S&F in repair PTMT ball valve high pressure 20 mm bore with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, complete in all respect as specified and directed.

S&F three layered rotational moulded made out from LLDPE material water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) including three tank nipples of 20 mm nominal bore dia of existing material hoisted and fixed in position including dismantling/ taking down all as specified in SSR part I, complete in all respect as specified and directed.

S&F In repairs CP finish cast copper alloy, two way bib tap with Health Faucet 15 mm dia fancy type with 1.00 mtr tube and hook complete in all respect as specified and directed. Make :- Jaquar Ct part No.DLX-512ANKN, Cera, Cat Part No. F2007162 or equivalent make in hindware

S & F in repair PVC cover for 500liter capacity water storage tanks of any description and any shape including PVC locking arragement complete in all respect as specified and directed.

S & F in repair PVC cover for 1000liter capacity water storage tanks of any description and any shape including PVC locking arragement complete in all respect as specified and directed.

Providing and laying for cement concrete in roof kerbs or mud stos, rounded or chamfered on edges using type B-1, 1:2:4 (using 20 mm nominal size crushed and graded stone aggregate) or of similar type of work including necessary formwork complete in all respect as specified and directed.

Demolition of reinforced cement concrete in roofs, manhole cover slab, floors n exc 15 cm thickness (below or above ground level) comlete all as specified and as directed.

M&L for precast RCC, type B-1, 1:2:4 (using 20 mm crushed and graded stone aggregate) as in manhole covers/ cover slabs or of similar type slab works, etc. incl necessary formwork and loading/ unloading of the same and fixed in position, complete in all respect as specified and directed.

S&F 10 mm dia and over TMT bar cut to length bent to shape required including cracking bending spiarlly for hoping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.90 mm dia or securing with clip, complete in all respect as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete in all respect as specified and directed.

S&F of CP two way bib tap with health faucet 15mm dia fancy type with 1.00 mtr tube and hook (braded tube) complete all as specified and directed

S & F of fixed in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to drarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, complete in all respect as specified and directed. Make : Jayna, Neelkhanth, Nirali

M/S MOHANPASARI

AVASANA SOLUTIONS PRIVATE LIMITED

MD. LATIFUL AHMED HUSSAIN