PROVISION OF STORAGE FACILITY ADJACENT TO MT SHED AT CGDHQ-15 OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

M & L for TMT bars 10mm dia & over cut to length bent to shape required including, cranking binding with & including MS wire not less than 0.90m dia or securing clips.

-dito- as per item no- 1 above but TMT bar as in stirrups, spacers & binders etc. 5 mm dia and over up to and including 10 mm dia bar.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for rough finished surface (Horizontal or sloping) etc complete all as specified and directed by Engr-in-charge.

Formwork to sides and soffits of roof beams,haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs also splays between floor and beam and the like for rough finished surfaces of concrete etc complete all as specified and directed by Engr-in-charge.

Form Work To Sides of pillars, posts, struts, piers, columns (square, rectangular or polygonal) as in rough finished surfaces of concrete complete all as specified and directed.

Formwork to edges of concrete flats exc. 10 cm but n.exc. 20cm wide

M&L RCC (Design mix) M-30 (using 20mm graded stone aggregate) in slabs supported on walls beam and colums in floors roof landing balconies canopies deck slab and in shelves and the like

M & L RCC (Design mix)M-30 (using 20mm graded stone aggregate) as in Chajjas

M & L RCC (Design mix)M-30 (using 20mm graded stone aggregate) as in lintels, beam etc over 1.5 mtr span.

M&L RCC (Design mix) M-30 using 20mm graded stone aggregates as in Columns,pillars,piers, posts and struts

M&L precast cement concrete type C1, 1: 3 : 6 ( 20 mm graded aggregate) block masonary with solid blocks ,exc,10 cm in width and setting in CM 1:6 complete all as specified and directed.

M&L precast cement concrete type C1, 1: 3 : 6 ( 20 mm graded aggregate) block masonary with solid blocks or slabs 10 cm thick (with plain or interlocking joints ) and setting in CM 1:4 complete all as specified.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels with decorative laminates 0.9mm on both sides

S&F 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a).

S&F Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S & F 100mm long, mild steel medium weight Butt hinges

S & F 75mm long, mild steel medium weight Butt hinges

S&F 150mm long Aluminium anodized barrel tower bolts of extruded section of bolt (ISI Marked) complete all as specified and directed.

S&F 200mm long brass barrel tower bolts, extruded section

S&F 300mm brass, sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts.

S&F 150 mm long Extruded aluminium alloy handles, fabricated type,anodised (ISI Marked) complete all as specified and directed.

S&F 300mm, brass ordinary rat tail rod pattern springs, including roller and roller plate complete

S&F 150 mm long extruded brass handles, fabricated type polished

S&F 150 mm long floor door stopper of brass body and tounge with hard drawn steel spring.

S&F Aluminium door closer hydraulically regulated, designation No 2, universal type, sutiable for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg.

M&L 18/19 mm thick block board, grade 2, interior grade, decorative type with decorative face vereers on both faces fixed with screws to timer frame work.

S&F 40 mm dia cupboards knob, fixed with nut, screws and washers of mild steel, brass polished.

S&F Continous piano hinges of 30mm width, mild steel bright finish or electrogalvaniged

S & F MS work as in holdfasts, bands, straps, hooks, etc. confirming to Fe.290.Gde-E-165

S & F 30 mm thick factory made solid panel PVC door shutter conferming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming stiles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge. Make : RAJSHREE/SINTEX

S & F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with 19x 19mm MS square tubes, provided with EPDM rubber gasket throughout the frame fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge. Make: RAJSHRI/SINTEX

M&L double charged vitrified ceramic tiles with light shade 10 mm thich Square or Rectangular polished area of each tilles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick scread bedding in cement mortar 1:4 , all as specified

M&L double charged vitrified ceramic tiles with light shade 10 mm thich Square or Rectangular polished area of each tilles vertical surfaces exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 10 mm thick backing coat in cement mortar 1:4 , all as specified

M& L Non-Skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bedding layer in CM 1 : 4.

S&F coloured glazed ceramic tiles 450x300mmx7 to 8mm thick on vertical surfaces including 10mm thick backing coat in CM 1:4 Such as skirting dados and riser to step etc set jointed in neat cement slurry and pointed in white cement to match

M&L for 20mm granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms in single piece, bullnosing/ rounding to edges of stone slab and like in cement mortar (1:4) including pointing in white cement (1 : 2) using marble dust with admixture of pigment to match with shade of granite over 20mm screed in cement (1 : 6).

S & F PVC (SWR) floor trap with grating including jointing with solvent 75 mm bore

S & F PVC (SWR) pipe single socketed 110 mm dia in any length, jointing with cement solvent solution, fixed to walls, floor or ceiling complete all as specified

S & F PVC (SWR) pipe single socketed 75 mm dia in any length, jointing with cement solvent solution, fixed to walls, floor or ceiling complete all as specified

S & F PVC (SWR) bend with door acess for 110 mm dia pipe complete all as specified

S & F PVC (SWR) bend with door acess for 75 mm dia pipe complete all as specified

S & F PVC (SWR) single Tee with door acess for 110 mm dia pipe complete all as specified

S & F PVC (SWR) single Tee with door acess for 75 mm dia pipe complete all as specified

S&F 110 MM dia PVC (SWR) vent cowl

Supply and lay of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and lay of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F Rimless Wall Hung WC with UF Soft Close seat cover, Hinges, Accessories set, size 400x580x370mm (Make : Jaquar Cat Part No VHS-WHT-81953UF or equivalant

Metro Pole flush valve Regular 32mm size (Concealed body) with exposed shut off provision (fixed discharge of 4.00 ltr per flushing) mm dia Jaquar Cat Part No FLV-1095NG

S&F Counter top Wash hand Basin Jaquar Cat Part No : SLS-WHT-6905

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality

S&F Grating square 150mm size of PTMT (Min wt 100 gms)

S&F Health Faucet with 8 mm dia, 1.20 mtr long flexible tube & wall hook (Jaquar Cat part No ALD - 573 or Equavalent)

S&F brass chromium plated 15 mm dia Wall mixer with hand shower.

S&F Pillar tap Single lever tall body with 150mm extetion body and 600mm long braided Hoses Jaquar Cat Part No ARI - 39005B

S&F 15mm bore CP Stop valves/angle valve, fancy type chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed in position.

S&F brass chromium plated shower rose of 125 mm dia

S& F brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges

S&F Tumbler holder (Jaquar Cat part No ACN - 1141N or Equavalent)

S&F Toilet Roll Holder (Jaquar Cat part No ACN - 1151N or Equavalent)

S&F Towel Ring Square with round flange (Jaquar Cat part No ACN - 1121N or Equavalent)

S&F Tumbler holder (Jaquar Cat part No ACN - 1141N or Equavalent)

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard bar 60 cm long

S&F 5.5 thick set of 3 glass corner shelf

S&F Towel Rack 600 mm long with lower hangers (Jaquar Cat part No AQN - 7781 or Equavalent)

S&F Soap Dispenser with glass Bottle (Jaquar Cat part No ACN - 1135N or Equavalent)

S&F Health Faucet with 8 mm dia, 1.20 mtr long flexible tube & wall hook (Jaquar Cat part No ALD - 573 or Equavalent)

M & L 15 mm thick cement plaster with CM 1:6 in two coats, (10 mm thick rendering coat in CM 1:4, 5mm thick second coat mixed with water proofing compound as per manufacturer instruction) on fair faces of brickwork/concrete work finished even & smooth without using extra cement.(Water proofing compound measured and paid separately)

Supply only Liquid water Proofing compound

M & L Rendering 15 mm thick in CM(1:4) ( mixed with water proofing compound) on fair faces of roof concrete work finished even & smooth without using extra cement.

M & L Rendering 10 mm thick in CM(1:6) ( mixed with water proofing compound) on fair faces PCC block masonry or concrete surfaces work finished even & smooth without using extra cement.

M & L Rendering 5mm thick in CM(1:3) on ceiling finished even and smooth without using extra cement

M&L white cement based putty 3mm thick make "JK Birla" or equivalent i.e preparing concrete or plastered surfaces preparatory to distempering/painting on wall surfaces

M&L white cement based putty 3mm thick make "JK Birla" or equivalent i.e preparing concrete or plastered surfaces preparatory to distempering/painting on ceiling surfaces

M&L Preparation of new plastered surfaces of wall and applying two coats of oil emultion distemper complete all as specified

M&L Preparation of new plastered surfaces of celling and applying two coats of oil emultion distemper complete all as specified

M&L Granules textured homogeneous wall finishing consisting of of a two component system of Dry Granules (25 Kgs per pack) made of 92% silica Particles coated with fade resisteant pigments, 100% acrylic polymer bonding agent (5 Kgs per pack) with the applied thickness of the coating between 0.8mm -1.2mm on a cured , smooth level plaster without keying, as per the shades/combinations approved, to be applied by and approved applicator of the manufacturer, as per the directions/supervision of the Engineer-in-Charge.The above textured coating should confirm to surface spread of flame class one of BS 476 : Part 7 : 1971 and pull off strength of the coating meet JISA 6909 on smooth plastered surface all as specified and as directed by Engr-in-Charge. Make : - Bakelite Hylam Limited or equivalent make approved by GE.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg/m2 incl cleaning surface all as specified and directed

M&L APP Based Polymeric memberane minimum weighing 3 kg /sqm and minimum 3mm thick Reinforced with polyster non wove fabric (wt not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and Directed by Eng-in- Charge

M&L cool roof tiles with light shade 10 mm thick Square or Rectangular polished on roof slab etc set and jointed in neat cement slurry and pointed in white or coloured epoxy with 2/3 mm thick spacers to match the colour of tiles including 15 mm thick scread bedding in cement mortar 1:4 , all as specified

S&F Hard Drawn Aluminium sliding window, fitted with 3 track window frame, and shutter with 4mm thick ordinary sheet glass with solar control film and aluminium xpm wire mesh of suitable aperature, 10 mm round bar as guard bars fitted with nuts at both ends and covered with stainless steel pipes, including rubber neoprene, gasket, handle and locking arrangments

S&F Hard Drawn Aluminium window and vent fitted window frame, and shutter with 4mm thick ordinary sheet glass with solar control film and aluminium xpm wire mesh of suitable aperature, 10 mm round bar as guard bars fitted with nuts at both ends and covered with stainless steel pipes, including rubber neoprene, gasket, handle and locking arrangments

S&F 25 mm dia decorative Draphery rod with brackets fixed in walls with wooden/plastic gutties and screws

M&L for Point wiring complete with 1.5 sqmm single core PVCinsulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets, fan regulators with required modules all as specified etc for:- Note: Cost of Making Good of existing disturbed surface deemed to be included in unit rate.

One light point or one fan point/bell point controlled by one switch with cables 1.5 sq mm size

One 3 pin socket outlet 6 amps on the independent, with cables 1.5 sq mm size

One 3 pin socket outlet 6 amps on the same board with other switches, with cables 1.5 sq. mm size

M&L for Point wiring complete with 2.5 sqmm single core PVCinsulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 2.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets, fan regulators with required modules all as specified etc for:- Note: Cost of Making Good of existing disturbed surface deemed to be included in unit rate.

S & F modular type 6 A one-way switch, 1 module Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F modular type 16 A one-way switch, 1 module Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply & fix modular socket, 6 Amps, 2/3 pin combind 2 module complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply & fix modular socket, 6/16 Amps, 2/3 pin combind 2 module complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply & fix modular fan regulator, 100 watt, 1 moduler complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

M & L for ceiling rose, surface bakelite, 65x17 mm three terminals complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F modular type bell switch 6 A one-way switch, 1 module Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F bell modular type of two module complete all as specified and as directed Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

Supply and fix in repair surface mounted LED batten fitting 20 Watt , with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire all as specified . Make : Philips(BN308C LED20S-6500 L60 PSU WH)/Wipro/ Osram

Supply and fix in repair surface mounted slim round downlighter fitting 10 Watt , with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire all as specified . Make : Wipro (IRIS)/ Philips/HPL (Jonex Plus)

S &F MCB (DB) SPN 12 way double door 415 V made of sheet metal enclosure for MCB's as incomming and SPN/SP MCB as outgoing as spoecified Make: Hager / Legrand/ schneider

M & L for submain wiring in existing surface/ Wall using IS:694- 1990 marked 1.1 kV grade single core HR-FR flexible cable having multi- drawn thin strands of electrolytic copper conductors and insulation for phase & neutral and earth continuity conductor connecting to earth dolly, drawn in medium grade non-metallic PVC conduit not less than 25 mm dia., colour-coded and making good of disturbed surfaces of wall/ceiling/floor complete all as specified and directed. [NOTE: 02 runs of phase & neutral conductors, 01 run of earth continuity conductor and 01 run of concealed conduit shall be measured as one length.]

2 X 6 SQ MM + 1 X 6 SQ MM

2 X 4 SQ MM + 1 X 4 SQ MM

Supply and Fix Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m all as specified and directed. Make: Almonard/Havells/khaitan

Supply & fix Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with BEE Five star rated with brushless direct current motor (BLDC) complete all as spd and directed. Make: Almonard/Havells/khaitan

S&F MCB SPN 40/63 A 10 KA, 240 V in DB Make: Legrand/ Schneider/Hager

S&F MCB SP 06/32 A 10 KA, 240 V in DB Make: Legrand/ Schneider/Hager

Supply & fix modular MCB, 25/32 Amps, 1 module complete all as specified and as directed. Make :- Legrand/ Schneider / Hager

Supply and install surface mounted vertical storage type 25 Ltr capacity, suitable for pressure pump, High Density PUF Heat Insulation,including mounting accessories and installation complete all as specified and directed.

M/S. P.M GODHANIYA

Sukhi Electricals

Vijay Construction Co

vijay infraprojects pvt ltd

roxy enterprise

JAMNAGAR ELECTRIC AND MACHINERY CO