PROVISION OF FURNITURE/ FURNISHING FOR GUEST HOUSE AT VIGYAN VIHAR, DEHRADUN AND DRDO RESIDENTIAL COMPLEX SANCHAR VIHAR RAIPUR ROAD, DEHRADUN

Amount

Supply of single seater sofa of size 700x700x740mm made out of hard wood frame work, arms, rests shall have 100mm wide teakwood, flat springs for seat and nawar strips for back, cladded with 100mm thick 40 density foam for seat and 70mm thick 32 density foam for back, 10mm MD thick poly foam for countering with white cloth lining, upholstered with fabric of approved brand and shade exposed wooden surface finished with melamine polish etc, complete

Supplying Two-Seater sofa of model parto of M/s Godrej make or techno commercial equivalent of the same, of size 1340mm (width) x 870mm (Depth) x 730mm (Height).

Supply of three seater sofa of size 1950x700x740mm made out of hard wood frame work, arms, rests shall have 100mm wide teakwood, flat springs for seat and nawar strips for back, cladded with 100mm thick 40 density foam for seat and 70mm thick 32 density foam for back, 10mm MD thick poly foam for countering with white cloth lining, upholstered with fabric of approved brand and shade exposed wooden surface finished with melamine polish etc, complete

Supply single bed of size 2050mmx950mm x450mm(H) including headboard made out of 18mm thick ply with 3.5mm thick teak veneer on exposed surfaces including 30mm x12mm teak wood beading on the edges, the bed shall have teak wood side runner of size 120mm x30mm and 12mm thick ply board top supported by 3 Nos. of teak wood bottom cross runners of size 50mm x30mm including two coats of mpleteall and providing mattress of 100mm thick of approved make including pillow and bed sheet etc complete as directed/ approved by Engineer-in-charge .

Supply double bed of size 2050mm x1850mm x 450mm(H) including headboard made out of 18mm thick ply with 3.5mm thick teak veneer on exposed surfaces including 30mm x12mm teak wood beading on the edges, the bed shall have teak wood side runner of size 120mm x30mm and 12mm thick ply board top supported by 3 Nos. of teak wood bottom cross runners of size 50mm x30mm including two coats of complete all and providing mattress of 100mm thick of approved make including pillow and bed sheet etc complete as directed/ approved by Engineer-in-charge .

Supply of Bed side table of size 450mm x450mm x400mm (H) made out of 18 mm thick ply with one drawer with telescope channel and exposed surfaces with 3.5mm thick teak veneer, teak wood beading on edges including two coats of melamine polish on exposed surfaces and internal surfaces of drawers with 0.8mm thick laminate all complete as per standard specifications and as directed by Engineer-in-charge.

Supply and placing in position dressing stool of size 400x400x400mm made out of 18mm thick laminated ply wood with edges with teakwood beading with exposed sufaces having 3.5mm thick veneer duely polished with two coats of melamine polish and top with 50mm thick fom and fabric of approved shade,complete all as directed by Engineer-in-charge.

Supply of peg table of size 450x450x400mm made out of 18mm thick ply wood with 1mm thick laminate on top made out of 60x60 mm teakwood legs complete with spirit polish.

Supply of writing table of size 1000mm x600mm x750mm (H) made out of teak wood frame of size 50mm x50mm thick and top with 18mm thick ply with 3.5mm thick teak veneer on top and having 2 Nos. of drawers including teakwood edge beading complete with two coats of melamine polish and inside surfaces with 0.8mm thick laminate etc all complete as per standard specifications and as directed by Engineer-in-charge.

Supply of Writing chair (with arm) of size 400mmx475mmx860mm made out of teak wood frame of size 52mmx30 mm seat with 12mm ply for seat with 50mm thick medium density foam covered with fabric of approved make and shade and the back shall be provided with 03 wooden strips 45mm x 25mm with decorative cutting including two coats of melamine polish etc all complete as per standard specifications and as directed by Engineer - in- charge. Drawings to be submitted and got approved by Estate Manager prior to fabrication.

Supply of Centre Table made out of 70x25mm teak wood frame work & 45x45 mm teak wood mouled legs, top to have 19 mm thick laminated top, edges to have 30mmx30 mm teak wood moulding finished with melamine polish all complete.

Supply of Reception Table of size 2400mm(L) x 600mm(W) x 1200mm(H) made out of 19mm ply with 3.5mm thick teak veneer on all exposed surfaces, one intermediate shelf at 750mm from bottom as writing top of width 600mm for receptionist and other top 300mm wide at height 1200mm, edges to have 6mm thick teak wood beading, drawer unit with three drawers made of 12mm thick ply and internal surfaces with 0.8mm thick laminate with all brass hardware, handles, brass locks, etc. including two coats of Melamine polish on all exposed surfaces etc all complete as per standard specifications and as directed by Engineer-in-charge.

Supply and placing in position Dining Table for 6 person of size 1850mm x1050mm x750 mm made out of teak wood frame of size 75x75mm and top with 25mm thick ply 3.5mm thick veneer including two of Melamine polish as per approved design and as directed by Engineer-in-charge.

Supply of dining table (for 4 persons) of size 1500mmx1050mmx750mm made out of teak wood of size 75x75mm and top with 25mm thick ply 3.5mm thick veneer including two of Melamine polish as per approved design and as directed by Engineer-in-charge.

Supply of dining chair of size 450mm x450mm x900mm made out of teak wood frame work, legs 45mm x45mm thick back with light curved shape with three teak wood back supports, seat with 50mm thick cushion with fabric of approved quality, shade and design including required coats of Melamine polish etc all complete as per drawing and standard specifications and as directed by Engineer-in-charge.

Supply of Charpoy overall size shall be 1980mm long, 900mm wide and 400mm height made out of 50mm x 25mm MS hollow rectangular section of wall thickness 3mm with spray paint/ hot paint and hard top with 19mm thick plywood. The top ply should be supported by MS flat of 25x5mm min. and head rest portion should be elevated by one foot in the same MS Section.

Supply of medium back chair PCH 7003 of Godrej or approved techno equvalent.

Supply of Bed side locker steel of size 1100 x 600 x 450 mm made out of C.R sheet with 20 gauge with spray paint with two openable shutters with 2 two shelves with provision for hanging cloth complete as per drawing.

Providing and fixing of wooden cabinet having top, bottom, sides and shelves with 18 mm thick BWR ply and back with 6 mm thick ply board (BWR) all exposed surfaces with 1mm thick laminate and internal surfaces with 0.8 mm thick laminate and all wooden surfaces with teak wood beading with sprit polish complete with all brass hardware etc. approved and directed by Engineer-in-Charge.

400mm deep wooden cabinet including drawers/shutters with 12mm BWR ply.

600mm deep wooden cabinet drawers/shutters with 12mm BWR ply .

VINAYAK INFRATECH

NARINDER KUMAR SONS

SA Enterprises

Megha Infraventures Pvt Ltd

Nikhil Decore Industries Pvt Ltd