Construction of Paver road from Masjid to Multi-Purpose Community Cultural Center in Ward No - 08

Excavation of Foundation in hard soil with lead & lift etc., including leveling and dressing of bed etc., Complete.

Filling in foundation & plinth with sand watered & rammed including cost,carriage,royalty,taxes etc. complete.

C.C (1:3:6) using 4cm size b.h.g (C.B) metal including cost, conveyance and royalty of all materials, cost of all labour, T&P etc., complete

supplying fitting and Fixing of Providing interlocking Paver Block of section of Size 80mm thick of approved quality over sand bed with cost of all materials

Provision of water supply to the water tank installed at CommunityHall Ward No.8 including sinking of 50mm dia No.6 shallow tubewell. Supplying fixing and fixing 3/4" PVC pipe from water point to Overhead tank with all cost

Supplying fixing and fixing 75mm dia PVC SWR pipe ( Type-A)

Supply and Fixing of 15W LED Bulb

Supplying fixing and fixing 1/2' Angel

Supplying fixing and fixing 20" orissa pan

Supplying fixing and fixing 20" high height pan

Supplying fixing and fixing 100mm plan bend

Supplying fixing and fixing 15mm dia pvc tap

Supplying and laying of 110mm PVC pipe class-ll(4kg/sqcm)

Supplying all materials, labour, T & P and setting up boring equipments including erection of suitable staging for installation of tube well of required size, dismantling and removing the same after completion of the work including transportation of boring equipments, cleaning & leveling the site, excavation of mud pit, channels etc. all complete as per specifications

Supplying all materials, labour, T & P and drilling pilot bore not less than 102 mm dia. Without casing pipes in all kinds of soils, Sand & rocks for the following depth excluding supply of necessary boring including pipes supply of necessary cutting equipments extra sockets (wherever required) etc. & with drawing boring pipes, washing & keeping the bore clear for logging if required etc. all complete as per specifications.

Supplying all materials, labour, T & P and lowering the PVC casing pipes, fittings and well screens in position including fitting & fixing centralizer, cutter plug and washing the bore as per specifications a) 50mm. dia PVC Pipes

b) 50mm. PVC strainers

iii) 50mm. x 3’.0” G.I. short piece =1no

vi) 40mm x 40mm x 25mm G.I Tee= 1no

vii) 1 ½’’ x 12’’G.I short piece= 1no

ix) Brass checkvalve= 1no.

iii) B. valve=2nos.

iv) Union

v) Brass MTA=3.0nos.

xi) U pvc solvent(118ml)=1no

xv) V-Guard Motor/Sintex

xvi) CP angle cock = 1no.

Display Board photo Graph T& P etc and complete(subject to actual) and other unforseen item(pre,During,Post)