Construction of Sports Complex and Tennis Court for Public Use at Officers Colony, Valsad under CSR 2026-27 Initiative by DGVCL

Description of Item Quantity Unit Rate Total Amount

No. ( 1 %) Rate

SCHEDULE B1 FOR SPORT COMPLEX

i.i CIVIL WORKS

Providing and applying fibre reinforced elastomeric liquid water

proofing membrane with resilient acrylic polymers having Sun

Reflectivity Index (SRI) of 105 on top of concrete roof in three coats

@10.76 litre/ 10 sqm. One coat of self-priming of elastomeric

waterproofing liquid (dilution with water in the ratio of 3:1) and two

1 coats of undiluted elastomeric waterproofing liquid (dry film thickness 17.000 SqM 563.1 5.631 568.731

of complete application/system not less than 500 microns). The

operation shall be carried out after scrapping and properly cleaning

the surface to remove loose particles with wire brushes, complete in

all respect as per the direction of Engineer-in-Charge.

Providing & Applying polymer modified, flexible cementatious

negative side waterproofing coating with elastic waterproofing

polymers on interior wall plaster surface in three coats @14.35 kg /10

sqm. one coat of self priming of cementatious waterproofing

2 polymer(dilution with water in the ratio of 1:1) and two coats of 58.000 SqM 447.35 4.4735 451.8235

cementatious waterproofing polymer (dilution with water in the ratio

of 3:1 ) after scrapping and properly cleaning the surface to remove

pre existing paint film & loose particles till plaster is visible, complete

in all respect as per the direction of Engineer-in-Charge.

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff

3 upto 50 Meter lead. (A) Loose or soft soil 120.000 Cum. 115.92 1.1592 117.0792

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff

4 upto 50 Meter lead. (B) Dense or Hard soil 47.000 Cum. 148.35 1.4835 149.8335

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

5 excavated stuff upto 50 Meter lead.(B) Dense or Hard soil 47.000 Cum. 160.95 1.6095 162.5595

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

6 excavated stuff upto 50 Meter lead.(C) Hard Murrum 16.000 Cum. 270.83 2.7083 273.5383

Rolling and consolidation using vibratory road roller 8- 10 tonne

capacity (incl. watering) (A) Earth work (layer not exceeding 200mm

7 thickness) 38.000 Cum. 32.76 0.3276 33.0876

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

sand : 6- hand broken stone aggregates 40 mm nominal size) and

8 curing complete excluding cost of formwork in (A) Foundation and 10.000 Cum. 2976 29.76 3005.76

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

10 of 20cm. thickness including watering, ramming and consolidating 86.000 Cum. 402 4.02 406.02

etc. complete with all lead & lift.

Providing and laying in position Ready Mixed M-250 grade concrete

for reinforced cement conctere work , using cement content as per

approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for a lead up to

kms having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work

including pumping of R.M.C. from transit mixer to site of laying and

11 the cost of centering shuttering finishing but excluding reinforcement 9.000 CuM 5376 53.76 5429.76

including cost of admixtures in recommended proportions as per IS:

9103 to accelerate/ retard setting of concrete, improve workability

without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) (Cement level 475 kg ).(Footing

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding reinforcement

for reinforced concrete work in Columns upto Plinth level.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding reinforcement

for reinforced concrete work in Columns on Ground Floor

Providing and laying controlled cement concrete M.250 and curing

14 complete including the cost of formwork and Excluding reinforcement 14.000 CuM 6729 67.29 6796.29

for reinforced concrete work in Plinth Beams.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding reinforcement

for reinforced concrete work in (C) Beams on Ground Floor

Providing and laying in position Ready Mixed M-250 grade concrete

for reinforced cement conctere work , using cement content as per

approved Design Mix manufactured in fully automatic batching plant

and transported to site of work in transit mixer for a lead up to

kms having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work

including pumping of R.M.C. from transit mixer to site of laying,

16 excluding the cost of centering shuttering finishing and reinforcement 3.000 CuM 6499 64.99 6563.99

including cost of admixtures in recommended proportions as per IS:

9103 to accelerate/ retard setting of concrete, improve workability

without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) (Cement level 450 kg ) (C) Ground

Floor Slab

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding reinforcement

for reinforced concrete work in (C) Chajja Ground Floor.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding reinforcement

for reinforced concrete work in (C) Lintel Ground Floor

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete Ground Floor

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in Super Structure in Cement

Mortar 1:5. (1 Cement : 5 -fine sand)(B) Conventional

(ii) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5

(1- Cement : 5 -coarse sand ) in Super Structure (B) Conventional

Providing 10mm thick cement plaster in single coat on brick/ concrete

walls for interior plastering upto floor two level and finished even and

smooth in (i)Cement mortar 1:3 (1-cement:3-sand) (For Ceilling and

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

23 floor two level and finished even and smooth in (i) Cement mortar 474.000 SqM 170.1 1.701 171.801

1:3 (1 cement: 3-sand) (Ground Floor)

Providing 20 mm thick double coat mala cement plaster on interior

brick / concrete work for plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

Providing throating or plaster drip and moulding to R.C.C. Chhajja.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete.

Applying two coats of putty & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including

27 thoroughly brushing the surface free from mortar dropping and other 490.000 SqM 40.19 0.4019 40.5919

foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

28 shade including throughly brushing the surface free from mortar 474.000 SqM 79.55 0.7955 80.3455

droppings and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

29 shade including throughly brushing the surface free from mortar 16.000 SqM 84.91 0.8491 85.7591

droppings and other foreign matter and sand papered smooth. (For

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

31 new surface or fixing on existing flooring by adhesive material 13.8399 1397.8299

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for antiskit

Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade

32 (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / 3.0905 312.1405

grouting and finishing complete as per direction of Engineer-in-

charge. 11.48.2 Size of Tile 600x600 mm

Providing and laying broken chine mosaic flooring for terrace using

mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar

33 creme out upto surface using white cement including rounding off 16.000 SqM 739.89 7.3989 747.2889

junctions and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

Cement Conerete Pavement

Construction of un-reinforced TRIMIX M-250, Plain cement concrete

pavement over a prepared sub base with 53 grade cement @ 380 Kg

per Cum, coarse and fine aggregate conforming to IS 383, maximun

size of coarse aggregate not exceeding 25 mm, mixed as per

approved mix design, transported to site, laid with a proper both side

34 fixed with MS channel and spread with surface vibrator, compacted 16.000 CuM 6390 63.9 6453.9

and finished in a continuous operation including provision of

contraction, expansion, construction and longitudinal joints, joint

filler, sealant primer, joint sealant, debonding strip, admixtures as

approved, vacum dewatering ( if require ), concrete surface hardner

curing compound , finished to lines and grades as per drawing.

Badminton Court Line Marking

Providing and applying International Standard Badminton Court line

marking on approved wooden sports flooring using approved PU Per

sports paint in specified colours, including layout, masking, finishing Court

and all labour, materials and accessories, complete as per BWF

standards.

Structural steel work ( Confirming to IS 4923-1997 riveted, bolted or

welded in builtup for all type sections, in framed work, including

36 cutting, hoisting, fixing in position and applying a priming coat of 7992.000 Kg 126.68 1.2668 127.9468

approved steel primer all complete as per the structural designs and

directions of Engineer in charge

Providing and fixing M.S. round holding down or anchor bolts with

nuts and washer plates complete.

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

38 shade including cleaning the surface an even shade including cleanicn 184.000 SqM 86.94 0.8694 87.8094

the surface of all dirt, dust and other foreign matter.

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

39 bitumen and G.I. limpet washer or G.I. limpet washer. filled with 187.000 SqM 719.93 7.1993 727.1293

white lead complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet..

Providing ridges or hips 600 mm overall in plain G.I. sheet class-3

fixed with G.I.J. or L Hooks and nuts 8mm dia G.I. Limpet and

40 bitumen washer complete. (1) 0.80 mm thick sheet. 20.000 SqM 635.58 6.3558 641.9358

Providing and Fixing Granite Telephonic Black Colour 15 to 18mm

thick for jambs and sills of doors & windows using neat cement slurry

laid over 20 mm average base of cement mortar 1:1(1 cement:1

Coarse Sand) and jointed with grey cement slurry including racking

41 (Tancha Work) rubbing and polishing, scaffoldings, tools and tackles, 25.000 SqM 2453.063253 24.53063253 2477.593886

scaffolding etc. complete(with base of neat cement) as per direction

of Engineer in charge including rounding the exposed edges as

Providing and fixing standared extruded of alluminium section of size

63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with colour anodized

alluminium frame with 5 mm thick transparent bronze colour tinted

float glass with colour anodized alluminium frame for ventilation with

5 mm thick frosted glass as details etc complete for.window

Providing and fixing window having extruded aluminum Colour

Powder Coated section frame main outer size 95mm x 24mm x

1.17mm @ wt.of 0.738 Kg/mt, horizontal Three track member size

92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt, vertical member of

size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with sliding

43 shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 22.000 SqM 1576.11 15.7611 1591.8711

0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @

wt.of 0.456Kg/mt with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing 35 mm thick Doors including anodised

alluminium butt hinges with necessary screws, Door Handle, Mortice

44 Lock, Door Stopper etc. Complete with necessary fixtures and 140.68 14208.68

fasteners of approved make.(A) Indian Teak Wood (1) Fully Panelled

(Door Size= 0.76X 2.4 M)

Providing and fixing 35 mm thick Doors including anodised

alluminium butt hinges with necessary screws, Door Handle, Mortice

Lock, Door Stopper etc. Complete with necessary fixtures and

45 fasteners of approved make.(A) Indian Teak Wood (iii) Partly 1.000 Each 14818 148.18 14966.18

panelled and partly glazed. (Door Size= 0.91X2.4)

Providing and fixing 35 mm thick Double Leaf Doors including

anodised alluminium butt hinges with necessary screws, Door Handle,

Mortice Lock, Door Stopper etc. Complete with necessary fixtures and

46 fasteners of approved make.(A) Indian Teak Wood (iii) Partly 1.000 Each 28387 283.87 28670.87

panelled and partly glazed. (Door Size= 2.0X2.4)

i.ii INDORE GAMES & FURNITURE

Providing and supplying Badminton Racket Set (Pack of 02) of

approved make (Yonex or equivalent), complete with protective

cover, including transportation and all accessories complete.

Providing and supplying Nylon Shuttle Cock (Mavis 350 or

48 equivalent), Pack of 06, suitable for badminton play, including 1.000 Set 1265 12.65 1277.65

transportation and all accessories complete.

Movable Badminton Net & Pole

Providing, supplying and installing BWF standard movable badminton

net post system comprising heavy-duty steel powder-coated poles Per

with counter-weighted base, tournament quality badminton net, Court

tensioning mechanism, all fittings, accessories and complete

installation, ready for use.

Providing and supplying Competition Grade Table Tennis Table (2740

× 1525 × 760 mm) with 25 mm pre-laminated particle board top,

powder-coated steel frame, heavy-duty foldable base with lockable

wheels, playback facility, complete with net & post set, including

transportation, installation and all accessories complete.

Providing and fixing 12-Compartment SS 304 Sports Locker (Size:

1850x900x450mm). Fabricated from 1.0mm (20 SWG) thick SS

sheet with a brushed finish. Unit includes a 75mm plinth base,

51 flush doors with CNC-punched ventilation, concealed hinges, recessed 2.000 Each 55062 550.62 55612.62

handles, and cam locks (2 keys per lock plus 1 master key), complete

in all respects.

Providng and fixing Bedminton court floor as per standard and norms

52 as per standard size and thickness, complete in all respects. 1.000 Each 200000 2000 202000

i.iii PLUMBING & DRAINAGE WORKS

Providing and fixing complete white Vitreous China wash-down

European Water Closet (EWC) suite comprising: an EWC pan

with integral P/S trap jointed in CM 1:1; a 12.5L low-level

flushing cistern with complete internal mechanical fittings,

53 brackets, and 40mm flush bend; a solid black plastic seat and 2.000 NoS 5149 51.49 5200.49

cover with CP brass hinges; and a heavy-duty CP health faucet

with wall hook. Rate includes all necessary couplings, labor,

cutting, and making good the walls and floors for complete

functional operation.

Providing and fixing washbasin with single hole for pillar tap

with C.I. or M.S. brackets painted white including sutting holes

and making good the same incluiding Providing and fixing

C.P.32 mm dia brass waste pipe and 15mm brass stop tap ,M.I

54 32 mm dia fisher union, bottel trap,C.P. Pillar cock 15 mm 2.000 NoS 3974 39.74 4013.74

Heavy duty swan neck complete with Necessary Couplings

(ii)Flat back wash basin Colour glazed 630 x 510 size.

including all Necessary Pacca fitting etc.complete as per

Providing and fixing 600mm x 450mm bevelled edge mirrror of

superior glass mounted on 6mm thick A.C. sheet or plywood

55 sheet and fixing to wooden pluge with C.P. brass screws and 2.000 NoS 825.48 8.2548 833.7348

Providing and fixing toilet paper holder.(A) C.P. Brass

Providing and fixing 600mm x 120mm glass shelf with C.P.

brass bracket and guard rail complete mixed to wooden plug

57 with C.P. brass screws. 2.000 NoS 513.45 5.1345 518.5845

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

58 with the help of clamp at every two metre C/C or shall be 20.000 Rmt. 71.93 0.7193 72.6493

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

59 with the help of clamp at every two metre C/C or shall be 20.000 Rmt. 90.93 0.9093 91.8393

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

60 with the help of clamp at every two metre C/C or shall be 20.000 Rmt. 117.97 1.1797 119.1497

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

61 with the help of clamp at every two metre C/C or shall be 10.000 Rmt. 146.65 1.4665 148.1165

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

62 with the help of clamp at every two metre C/C or shall be 10.000 Rmt. 193.73 1.9373 195.6673

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing, laying and jointing in true line and level 110 mm

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 mm

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm

heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

Providing and fixing screw down bib taps of following size.(B)

Brass chromium plated screws down Bib Tap. 15mm dia.

Providing and fixing Gun metal check or non-return fullway

wheel valve.(C) 25mm dia.

Providing and fixing Gun metal check or non-return fullway

wheel valve.(D) 32mm dia.

Providing and fixing Gun metal check or non-return fullway

wheel valve.(E) 40mm dia.

Providing and fixing cast iron (Spun) Nahni trap of the following

nominal diameter of self cleaning design with C.I. screaed

69 down or higned grating including cost of cutting and making 5.000 Each 600.08 6.0008 606.0808

good the walls and floor 100mm inlet and 50mm outlet.(C)

100mm dia.

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

70 300mm x 300mm size (inside) with standard weight.(i) Square 5.000 Each 1279.4 12.794 1292.194

mouth traps. (A) 100mm x 100mm size P type.

Providing and fixing ball cock of approved. quality as

directed.(A) Copper Metal (i) 25mm dia.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

72 1:2:4 mix (1-cement :2- coarse sand :4-graded stone 4.000 Each 3624.51 36.2451 3660.7551

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(ii) Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

Constructing Brick masonry road gully chamber 500mm x

450mm x 600mm including 500mm x 450mm C.I. horizontal

73 grating wih frame complete. 2.000 Each 1997.22 19.9722 2017.1922

Constructing manhole with RCC top slab in 1:2:4 mix (1 cement

: 2 coarse sand : 4 graded stone aggregate 20mm nominal

size) foundation concrete 1:3:6 mix (1cement : 3 coarse sand :

6 brick bats 40 to 50mm nominal size) inside & outside

plastering 15mm thick with cement mortar 1:5 (1 ce.ment :

coarse sand) finished with a floating coat of neat cement slurry

& making channels with 1:2:4 cement concrete (1 cement :

conarse snad : 4 stone aggrate 20mm nominal size) neatly

finished smooth complete incuding curing & testing (I) Inside

size 900mm x 1200mm & 1.5mtr deep including CI cover with

frame size 560mm diameter total weight of cover & frame to

74 be not less than 128 kgs (weight of cover 64kg & weight of 1.000 Each 10920.76 109.2076 11029.9676

frame 64kg) (A) with 230mm thick wall of brick masonary usng

bricks having crushing strength not less than 35 kg/sq. cm in

cement mortar 1:5 (1 cement : 5 coarse sand) (1) A-type

depth 0.9mtr for 150mm diameter sewer

retain moisture for

long time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil Length

of pipe - 1 Mtr Back filling compound - 1 Nos Bag of

Kg.PROVED BY ENGINEER IN CHARGEnufacturers with

following size.

(A) locally fabricated panel board

(i) with 350 mm

Providing and fixing cast iron steps of size 500mm x 150mm x

22.5mm and painting with two coats of Anti-corrosive paint etc.

75 complete. 4.000 Each 201.74 2.0174 203.7574

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size

having weight not less than 35Kg.

Providing erecting and fixing double coated ISI water tank of

required capacity each with all necessary fittings and

77 connection etc. complete on terrace 2000.000 Litre 3.91 0.0391 3.9491

Providing and fixing in position cowel went to pipes.(C) 100mm

78 dia 2.000 Each 496.9 4.969 501.869

Providing and fixing G.I. Rain water spout of 50mm dia. and

79 30cm. length. 4.000 Each 100.9 1.009 101.909

Supplying & erecting approved make self-priming domestic

monoblock water pump with 1 H.P motor, suitable for

operation on 230 volts, 50 Hz. AC supply with metallic flange,

80 and M.S. impeller delivery and following discharge 1.000 Each 8363 83.63 8446.63

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia. Delivery

i.iiii ELECTRICAL WORKS

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/ white front plate

modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder /ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 kV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat. III Pt.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 kV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box covered

83 with appropriate front plate modules erected on / in wall / 8.000 Nos 606 6.06 612.06

ceiling as per pipe erected with following type of accessories.

(I) [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III Pt.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 kV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box covered

84 with appropriate front plate modules erected on / in wall / 1.000 Nos 886 8.86 894.86

ceiling as per pipe erected with following type of accessories.

(II) [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Cat.

85 SECTION B — CIRCUIT MAINS, WIRES AND CONDUIT 0 0

Providing and erecting Mains with 1.1 kV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

86 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC 144.000 Rn.Mtr 103 1.03 104.03

insulated stranded wire of green colour for earth continuity of

following size (A) (A) With medium class Rigid PVC pipe and

accessories (c) 3 wire 1.5 sq. mm Mtr.

providing and erecting Mains with 1.1 kV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

87 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire 96.000 Rn.Mtr 139 1.39 140.39

of green colour for earth continuity of following size (A) (A)

with medium class Rigid PVC pipe and accessories (a) 2 wire

sq. mm Mtr.

providing and erecting Mains with ISI marked, 1.5kV grade

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

88 erected in existing pipe of following size (Specifically for control 144.000 Rn.Mtr 34 0.34 34.34

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

required. (c) One wire 2.50 sq. mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

89 ceiling erected with necessary PVC fittings & Junction boxes 144.000 Rn.Mtr 33 0.33 33.33

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (b) 25 mm

SECTION C — CABLE AND ACCESSORIES 0 0

Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for 1.1 kV. to

90 be laid on wall with necessary clamps or in existing trench / 25.000 Rn.Mtr 227 2.27 229.27

pipe of following size of cables

(B) 4 core 25 Sq. mm

Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium conductor for

91 kV. to be laid on wall with necessary clamps or in existing 12.000 Rn.Mtr 167 1.67 168.67

trench / pipe of following size of cables (C) 4 core 10 Sq. mm

Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium conductor for

92 kV. to be laid on wall with necessary clamps or in existing 15.000 Rn.Mtr 150 1.5 151.5

trench / pipe of following size of cables (B) 4 core 6 Sq. mm

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured

93 cable Aluminium conductor for 1.1 kV. to be laid on wall with 120.000 Rn.Mtr 95 0.95 95.95

necessary clamps or in existing trench / pipe of following size of

cables. (A) 2 core 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

94 with out going tails, insulating tape etc for following size of 4.000 Ea. 51 0.51 51.51

(E) 2 to 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

95 with out going tails, insulating tape etc for following size of 2.000 Ea. 38 0.38 38.38

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

96 with out going tails, insulating tape etc for following size of 2.000 Ea. 38 0.38 38.38

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

97 with out going tails, insulating tape etc for following size of 12.000 Ea. 33 0.33 33.33

(A) 2 to 4 core 2.5 / 4 Sq. mm

Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure

98 tool & connected to switchgear terminals with brass/cadmium 16.000 Ea. 15 0.15 15.15

plated nut bolts in an approved manner. (D) 25 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure

99 tool & connected to switchgear terminals with brass/cadmium 8.000 Ea. 10 0.1 10.1

plated nut bolts in an approved manner. (B) 10 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure

100 tool & connected to switchgear terminals with brass/cadmium 32.000 Ea. 8 0.08 8.08

plated nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Making trench in soft soil of suitable width of 90 cm deep for

101 laying cable or locating the fault all over the run and back filling 135.000 Mtr 55 0.55 55.55

the same and making the surface as normal ground.

Providing & laying approved make ISI marked HDPE 6Kg / cm2

(Class-3) as per IS:4984:1995 PE-80 to be erected at road

102 crossing on or floor as directed for laying of cable. The pipes as 20.000 Mtr 62 0.62 62.62

following size of dia & weight per 6 mtr. (A)50 mm outer dia

SECTION D — FITTING AND FANS 0 0

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.95, THD <

15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % ( fitting required

LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

(A) Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.95, THD <

15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % ( fitting required

LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

(A) Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 kV

Supplying and Erecting Of L.E.D. type High bay fixture having

Power Consumption of following watts with, Input Voltage 110 -

290 V.AC with full efficiency, Power Factor > 0.9 with 50/60

HZ, CCVC LED Driver used for maximum power saving, Best

105 Quality Aluminium alloy housing and aluminium Dome for 8.000 Ea. 5696 56.96 5752.96

better heat dissipation, CCT Cool white (6000K), CRI 80, Beam

angle > 120 degrees, working temperature -20 deg c to +55

deg c, Body IP 65 (B) 90 to 150 watts

Providing & erecting Approved make Power Saving 45 -

Watt Ceiling Fan with double ball bearing ISI mark with

106 Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete 2.000 Ea. 1929 19.29 1948.29

having 3blades with aluminium blades with , canopy & 30 cm.

down rod erected with earthing.(Make shall be approved by

Engineer in charge))

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and

107 pierced through a 16 Gauge M.S. box / Heavy Duty PVC box 2.000 Ea. 107 1.07 108.07

complete erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan

hook or Fan box.

Supplying and erecting 19 / 20 mm. nominal bore Medium

109 Class M.S. Pipe down rod erected duly painted for fan complete 1.000 Mtr. 107 1.07 108.07

with proper insulation without leakage and earthing.

Supplying and erecting approved make Bracket fan of 230 volt,

110 A.C. 50 Hz., 400/450 mm sweep complete erected on wall or 6.000 Ea. 2085 20.85 2105.85

with lead Cores and connections complete. Cat.II

Providing & erecting fresh air fan 250 mm dia with square

111 frame make of ABS body with louvers 2.000 Ea. 1544 15.44 1559.44

SECTION E — SWITCHGEAR AND DISTRIBUTION BOARD

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

112 MCBs.(The DBs should be used of same company of MCB to be 1.000 Ea. 2885 28.85 2913.85

used) suitable for

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door

providing and erecting Miniature circuit breaker single pole 6A

to 25A suitable to operate on 240 V A.C. system and having

113 breaking capacity 10 KA to be erected in existing box. 12.000 Ea. 122 1.22 123.22

confirming to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to

114 IS : 8828 in existing box having following capacity 1.000 Ea. 304 3.04 307.04

(A) 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

115 confirms to IS :8828 in existing box having following capacity 1.000 Ea. 728 7.28 735.28

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

116 confirms to IS :8828 in existing box having following capacity 2.000 Ea. 649 6.49 655.49

(a) 6 to 32 Amp.

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

117 thermal & magnetic release suitable to work on A.C. supply 50 1.000 Ea. 6723 67.23 6790.23

Hz. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

phase and neutral 415V,50Hz. having characteristic of quick

118 action & tripping with all advance feature & do not incorporate 1.000 Ea. 3311 33.11 3344.11

any electronic component for following Max. rating erected as

(iii) 63 Amps. FP

providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single

119 phase 240 V,50Hz. having characteristic of quick action & 1.000 Ea. 2145 21.45 2166.45

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

(i) 25 Amps.DP Cat. III

Providing and erecting metallic vitrified danger notice board as

120 per language suggested by engineer incharge for MEDIUM 3.000 Ea. 69 0.69 69.69

VOLTAGE installation to be erected as per IS-2551.

SECTION F — LT PANEL

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts- Sq.

base Plates, sufficient nos. of hinged doors, handles with Mtr.

locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses

etc. The dimension shall be measured excluding base beams)

The panel shall be supplied with following approved

manufacturers with following size.

(A) locally fabricated panel board

(i) with 350 mm depth

Supplying and erecting triple pole & neutral 440V/ 500V panel

mounting Aluminium Busbars with four equal Nos. of bus

having current density not more than 0.8 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour

insulating tape for phase sequence of following current carrying Rn.

capacity, erected with necessary bus bar supports /insulators, Mtr.

main cable socket to each busbar,erected in existing cubical

panel with necessary connections.

(A) Suitable for 100 Amp. Capacity

Supplying and erecting approved make panel mounting type

Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts

123 range erected on existing panel board with all connection, 1.000 Ea. 1263 12.63 1275.63

wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type

Digital Ammeter having 3 digits LED display, external CT

124 operated, calibrated for 0 to 1000 Amps suitable to operate on 1.000 Ea. 1543 15.43 1558.43

500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

certificate.

125 3 phase AC Supply 500 V on existing panel board with 2.000 Ea. 314 3.14 317.14

necessary connections.

Supplying and erecting approved make suitable panel indicator

126 LED type lamp, lens cover, complete erected with necessary 3.000 Ea. 43 0.43 43.43

connections.

Supplying rubber matting of following thickness as per Sq.

IS:15652/IEC 61111 (a)3mm Mtr.

SECTION G — EARTHING

Supplying & erecting in earthpit of minimum bore dia. 225mm

size approved make Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-

200 Micron galvanising, Inner pipe dia of 40 mm having 200-

250 Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and

128 signed by agency and officer Incharge has to ensure the value 6.000 Ea. 5785 57.85 5842.85

of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test report

must be submitted by Agency.

[A] For electrical installation up to 440 V Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

Providing one bag of 25 Kg. Additional Back Filling Compound

(BFC) suitable for safe earthing device.

Providing and erecting Annealed bare Copper wire 4.064mm to

Providing and erecting HOT deep Galvanised iron strip/wire

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and

132 signed by agency and officer Incharge has to ensure the value 6.000 Ea. 4546 45.46 4591.46

of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test report

must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil Length

of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

Total Amount for Schedule B1

Total Amount for Schedule B1

SCHEDULE B2 FOR TENNIS COURT

i.i CIVIL WORKS

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work

Dismentling steel work including distempering and

stacking the materials with all lead and lift.

Dismantling, removing, loading and stacking of existing park bench

complete including removal from foundation, minor excavation

around legs, loosening anchor bolts or breaking PCC around supports

where required, lifting manually, shifting up to 50 m within site

premises and stacking in an orderly manner as directed by the

Engineer-in-Charge, complete.

Taking out existing kerb stones of all types from footpath/ central

verge, including removal of mortar etc., disposal of unserviceable

material to the dumping ground, for which payment shall be made

separately and stacking of serviceable material within 50 metre lead

as per direction of Engineer-in-Charge.

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff

137 upto 50 Meter lead. (A) Loose or soft soil 36.00 Cum. 115.92 1.1592 117.0792

Rolling and consolidation using vibratory road roller 8- 10 tonne

capacity (incl. watering) (A) Earth work (layer not exceeding 200mm

138 thickness) 140.00 Cum. 32.76 0.3276 33.0876

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

sand : 6- hand broken stone aggregates 40 mm nominal size) and

139 curing complete excluding cost of formwork in (A) Foundation and 13.00 Cum. 2976.00 29.76 3005.76

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

141 of 20cm. thickness including watering, ramming and consolidating 29.00 Cum. 517.00 5.17 522.17

etc. complete with all lead & lift.

Providing and laying approved quality Wet bound Macadam (WBM)

base/sub-base layer using hard broken machine crushed stone

aggregates comprising 40–63 mm graded metal, 13.20 mm size

crushed aggregate/screening material and stone dust/filler, spread in

142 uniform layers, watered, mixed, graded and compacted to required 105.00 CuM 1477.00 14.77 1491.77

line, level, camber and gradient with vibratory roller to achieve

specified density, including preparation of surface, loading, unloading,

royalty, carriage, labour, machinery, all leads and lifts complete as

per specifications and direction of Engineer-in-Charge.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding reinforcement

143 for reinforced concrete work in (A) Foundations, footings, Base of 2.00 SqM 4792.00 47.92 4839.92

columns and Mass concrete.(Footing Concrete)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of

145 M200 grade concret as per approved design and including excavation 206.00 Rmt 376.43 3.7643 380.1943

for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3 fine sand) etc complete.

Providing and laying decorative brick flooring/paving using approved

common burnt clay modular bricks of size 200 × 100 × 100 mm in

required pattern, alignment and curvature over prepared and leveled

mortar bed of 25mm thickness, including cutting, dressing, soaking of

146 bricks, laying with uniform joints, filling joints with fine sand/cement 87.00 SqM 561.00 5.61 566.61

slurry as approved, proper compaction, curing, finishing and cleaning

complete to achieve even surface and architectural appearance as

directed by Engineer-in-Charge.

Providing and laying European Flexipave Synthetic Acrylic Cushion

System (8-layer, 4–5 mm thick) comprising 2 coats Resurfacer, 1 coat

147 Cushion Base, 2 coats Cushion Finish, 2 coats Smooth Textured and 1 609.00 SqM 1092.00 10.92 1102.92

coat Smooth Finish, complete as per manufacturer's specifications

Engineer-in-Charge.

Providing and fixing complete ITF standard Tennis Court Net Set

comprising braided knotless PE net, powder-coated/ hot-dip

galvanized MS posts, complete as per manufacturer's specifications.

(Civil work to be paid seperately)

Providing and applying ITF standard acrylic game line marking for

149 Lawn Tennis Court, complete as per approved layout and 1.00 8453.00 84.53 8537.53

manufacturer's specifications.

Structural steel work ( Confirming to IS 4923-1997 riveted, bolted or

welded in builtup for all type sections, in framed work, including

150 cutting, hoisting, fixing in position and applying a priming coat of 324.00 Kg 126.68 1.2668 127.9468

approved steel primer all complete as per the structural designs and

directions of Engineer in charge

Providing and fixing M.S. round holding down or anchor bolts with

nuts and washer plates complete.

Cement Conerete Pavement

Construction of un-reinforced TRIMIX M-250, Plain cement concrete

pavement over a prepared sub base with 53 grade cement @ 380 Kg

per Cum, coarse and fine aggregate conforming to IS 383, maximun

size of coarse aggregate not exceeding 25 mm, mixed as per

approved mix design, transported to site, laid with a proper both side

152 fixed with MS channel and spread with surface vibrator, compacted 61.00 CuM 6693.00 66.93 6759.93

and finished in a continuous operation including provision of

contraction, expansion, construction and longitudinal joints, joint

filler, sealant primer, joint sealant, debonding strip, admixtures as

approved, vacum dewatering ( if require ), concrete surface hardner

curing compound , finished to lines and grades as per drawing.

Providing and fixing 4.0 m (13 ft) high perimeter fencing with 3" × 3"

MS square tube posts at 4.5 m c/c, 2" × 1" MS rectangular tube

153 horizontals (top, middle & bottom), fitted with 2.5 mm braided 432.00 SqM 644.00 6.44 650.44

HDPE/PE net of 45 mm mesh, including red oxide primer, painting

and complete installation.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

154 clamp at every two metre C/C or shall be concealed as directed 50.00 Rmt. 90.93 0.9093 91.8393

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

155 clamp at every two metre C/C or shall be concealed as directed 140.00 Rmt. 117.97 1.1797 119.1497

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

156 clamp at every two metre C/C or shall be concealed as directed 50.00 Rmt. 146.65 1.4665 148.1165

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials.

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (ii) 20mm dia.

Providing and fixing brass screw down stop tap.(B) 25mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(D) 32mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(E) 40mm dia.

i.ii STREET FURNITURE

Providing and fixing outdoor dual waste litter bin of overall size 900 ×

450 × 900 mm, comprising 1.6 mm thick powder-coated high-grade

steel body and frame with 100% recycled wood-plastic composite

(WPC) front slats in natural wood finish, dual compartment of

161 litres total capacity (2 × 60 L), back-hinged lockable lids, covered 2.00 Set 31740.00 317.4 32057.4

waste openings, SS internal bag support rings, anti-corrosive weather-

resistant powder coating, vandal-resistant construction, complete

with all fixtures, fittings and anchoring arrangements as per approved

design and manufacturer's specifications.

Providing and fixing outdoor heritage bench of overall size 1800 ×

630 × 815 mm, comprising heavy-duty powder-coated cast iron

frame and legs with ergonomically designed recycled waste polymer

(WPC) seating and backrest slats having wood-like finish, UV-

162 resistant, moisture-proof, corrosion-resistant and splinter-free, 4.00 Each 33120.00 331.2 33451.2

suitable for seating 3 adults, complete with all hardware, anchor

fasteners and surface mounting arrangements as per approved

design and manufacturer's specifications.

Providing and fixing precast RCC bollard, 900 mm high and 150 mm

dia, of M30 grade RCC with smooth finish, including fixing complete

as per approved specifications. (Civil Work to be paid extra)

i.iii PLANTATION

Providing and planting Amaltas (Cassia fistula) tree of approved

nursery-grown quality in 18" × 18" bag, healthy and well-rooted,

164 including excavation of pit, refilling with good earth, manure, 8.00 Each 880.00 8.8 888.8

watering, staking and maintenance, complete. (Soil to be paid

seperately)

Providing and planting Gulmohar (Delonix regia) tree of approved

nursery-grown quality in 18" × 18" bag, healthy and well-rooted,

165 including excavation of pit, refilling with good earth, manure, 6.00 Each 840.00 8.4 848.4

watering, staking and maintenance, complete. (Soil to be paid

seperately)

Providing and planting Kachnar (Bauhinia variegata) tree of approved

nursery-grown quality in 18" × 18" bag, healthy and well-rooted,

166 including excavation of pit, refilling with good earth, manure, 6.00 Each 863.00 8.63 871.63

watering, staking and maintenance, complete. (Soil to be paid

seperately)

Providing and planting Plumbago of approved variety in 8" × 10" bag,

167 including bed preparation, planting, manure, watering and 12.00 SqM 466.00 4.66 470.66

maintenance, complete. (Soil to be paid seperately)

Providing and planting Euphorbia milii of approved variety in 8" × 10"

bag, including bed preparation, planting, manure, watering and

maintenance, complete. (Soil to be paid seperately)

Providing and planting Ixora (Flame of Woods) of approved variety in

8" × 10" bag, including bed preparation, planting, manure, watering

and maintenance, complete. (Soil to be paid seperately)

Providing and planting Madagascar Periwinkle (Catharanthus roseus)

of approved variety in 6" × 8" bag, including bed preparation,

planting, manure, watering and maintenance, complete. (Soil to be

paid seperately)

Providing and planting Peregrina (Jatropha integerrima) of approved

variety in 8" × 10" bag, including bed preparation, planting, manure,

watering and maintenance, complete. (Soil to be paid seperately)

Providing, supplying and spreading approved fertile garden soil free

172 from stones, weeds and debris, including dressing, levelling and 19.00 CuM 627.00 6.27 633.27

preparation for plantation, complete.

Providing and applying Vermicompost, NPK fertilizer, fungicide,

173 termite treatment and insecticide for trees, shrubs and ground cover, 61.00 SqM 29.00 0.29 29.29

complete as per horticultural specifications.

i.iiii ELECTRICAL WORKS

Supplying FRP Pole made by CNC filament winding machine using

thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. Manufactured in one piece and tapered round in

shape, having smooth finish and should be totally free from corrosion

as well as non conductive & shock proof Pole. Flame retardant as per

IS 6746. Resin used shall be UV resistance and pigmented. Pole

made as per the dimensional data, performance criteria and some

interchangeability features of poles as per standard ANSI C

latest version or ASTM D 4923/01 including cable termination box

with necessary accessories with zinc coted foundation set. Overall

length of 4 Mtr. Average Thickness: 7mm. Top/ Bottom OD Dia A/F

89/145 mm ± 2mm approx. LED Ring Post Top with Aluminium die 18.00 Each 26186.00 261.86 26447.86

cast having unbrekable polycarbonate diffuser. warm white 3000 K,

CRI ≥ 80, with die-cast aluminium body and unbreakable

polycarbonate diffuser. Built-in constant current driver, 230 V AC, PF

> 0.9, surge protection up to 10 kV, IP66 / IK08. Post-top mounting

on Ø60 spigot with Ø89/60 pole-top adapter, complete with earthing

and accessories, as per approved make and as directed. Watt :

NOTION / SUMIP / TECHMECH MAKE OR ANY EQUIVALENT BRAND

APPROVED BY ENGINEER IN CHARGE

Providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat.III

Plastic enclosure fitted with DIN rail suitable for incorporating Three

/Four nos. MCB

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (b) sheet steel

double door (IP-43) (ii)6 way

Providing & erecting 240 V MCB double pole switch for lighting Load

(B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity (A) 6 to 32 Amp. Cat.III

Supplying & erecting power contactor ,AC3 duty for time switch

179 complete erected as per direction Cat III (C) 4 pole 440V 16 Amp. 1.00 Each 849.00 8.49 857.49

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 kV. to be laid on wall

181 with necessary clamps or in existing trench / pipe at road crossing or 40.00 Rmt. 631.00 6.31 637.31

floor of following size of cables. (C) 4 core 6 Sq. mm

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 kV. to be laid on wall

182 with necessary clamps or in existing trench / pipe at road crossing or 60.00 Rmt. 451.00 4.51 455.51

floor of following size of cables. (B) 4 core 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables. (B) 2 to

core 6 Sq. mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

184 connected to switchgear terminals with brass/cadmium plated nut 60.00 Each 8.00 0.08 8.08

bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Supplying following size of Light duty “A” Class G.I . Pipe & erecting

as directed by Engineer-in-charge. (A) 25 mm dia

Providing and erecting iron clad cable route marker duly marked with

ELE.CABLE of size 23 cm.X 12 cm. Flushed with ground in cement

foundation as directed by Engineer in charge.

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

187 connecting accessories of same material at required depth in existing 205.00 Rmt. 62.00 0.62 62.62

trench for laying of cable. below ground / road surface for enclosing

cable (A)50 mm outer dia

Making trench in soft soil of suitable width of 90 cm deep for laying

188 cable or locating the fault all over the run and back filling the same 205.00 Rmt. 55.00 0.55 55.55

and making the surface as normal ground.

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly

189 stamped and signed by agency and officer Incharge has to ensure 7.00 Each 4546.00 45.46 4591.46

the value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting Annealed bare Copper wire 4.064mm to

Providing and erecting required size Copper strip for earthing of H.T.

191 OCB / ACB/ Transformer, LT panel board, Motors etc. using copper 2.00 Kg. 787.00 7.87 794.87

Supplying & erecting Steel tubular pole (Swaged) confirming to IS -

2713 (Part-II) 1980. Manufacturing process of steel tubular pole

should be as per IS specification. Basic steel tube should be ISI

Marked. Pole should be painted by one coat of Zinc comet Primer and

192 two coat of Aluminium /approved paint to be erected on / in existing 4.00 Each 7175.00 71.75 7246.75

Foundation. The length of poles are as below. (A) 7.5 mtr. Long

Swaged Steel tubular pole (i) pole as per IS code 410-SP-4 with

X 300 X 4 mm base plate with necessary G.I. J Bolts (Approximate

Pole weight 67 Kg) For burial erection

Supplying & erecting Steel tubular pole (Swaged) confirming to IS -

2713 (Part-II) 1980. Manufacturing process of steel tubular pole

should be as per IS specification. Basic steel tube should be ISI

Marked. Pole should be painted by one coat of Zinc comet Primer and

two coat of Aluminium /approved paint to be erected on / in existing

Foundation. The length of poles are as below. (A) 7.5 mtr. Long

Swaged Steel tubular pole (iii) Add Extra for PU base primer and PU

Paint on pole.

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 60 x 60 x 120 cm.

Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm

dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner. ( for 7.5 & 8/8.5 mtr pole)

Supplying and erecting street light pole bracket comprising main B

Class GI pipe of 4.2 cm/require outside dia. complete with suitable B

Class GI sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm or require size pole top having sufficient fastners for

fixing the brackets and having suitable rise as per site condition as

195 directed and spread of 2 mtr.with suitable welded stiffener reducer 4.00 Each 1111.00 11.11 1122.11

and with lock nut complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU paint. Suitable for side

entry fitting brackets of following nos of arms. [B] Double Arm

Bracket 2 Mtr.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

196 than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio 8.00 Each 9104.00 91.04 9195.04

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.) (B) Flood Light (IP-65), Surge protection

-4kV integral and ,Light must have 440VAC line supply with over-

voltage protection. (vii) 200 - 250 watts

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity & confirms

to IS : 8828 in existing box having following capacity (A) 6 to

Amp. Cat.III

Providing & erecting insulated socket 3P+N+E with Plug16A rating

198 which is comprised of Four pole MCB slot and insulated socket IP40 2.00 Each 1690.00 16.9 1706.9

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 kV. to be laid on wall with

199 necessary clamps or in existing trench / pipe at road crossing or floor 90.00 Rmt. 838.00 8.38 846.38

of following size of cables. (A) 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables. (C) 2 to

core 10 Sq. mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

201 connected to switchgear terminals with brass/cadmium plated nut 16.00 Each 10.00 0.1 10.1

bolts in an approved manner. (B) 10 Sq.mm

Misc. work/Unforseen work if required to be carried out during

execution of the work which are assential and required at stage of As per

working such as Electrical work,Furniture work, Landscaping work,

Plumbing work, Flase ceiling work, colour work and misc. civil work

as per instruction of Engineer in charge.

Total Amount for Schedule B2

Total Amount for Schedule B2

Total Amount In Rs.(Shedule B1+Schedule B2)

Total Amount In Rs.(Shedule B1+Schedule B2)

consultancy 1% if required Carrying out structural design including

required testing and getting BUC approval from govt. /local authority

203 including preparation plan and submision of proposal to govt. /local 1.000 JOB 75608.92 - -

authority for getting permission etc. complete as per EIC . (@3% of

total cost)

Total Amount In Rs.(Excl GST)

Total Amount In Rs.(Excl GST)

Add 18% GST

Total Amount In Rs.(Incl GST)

Total Amount In Rs.(Incl GST)

All royalties, tolltax, localtax, development charges, and any other taxes etc., inrespect of this contract and also any statutory variation in future

towards above mentioned taxes & anyother taxes if levied in future by statutory authority applicable to the this contract shall be payable by the

contractor and DGVCL will not entertain any claim whatsoever in this respect.

The Contractor has to pay 1% Labour Welfare Cess of Bill amount to the concern Government Department.

The contractor shall produce the receipt of payment of 1% welfare cess from the respective govt. department.

The proof of payment made by the contractor to the appropriate department shall be submitted to DGVCL, failing which appropriate amount shall be

withheld on getting information/instruction from the concerned department.

I /We agree to carry out the above work at

Add (+)________% above . Rs.

Less (-) _________% below Rs.

Total cost of work. Rs.

(TotalcostofworkRs. ____________________________________

Signature of Tenderer Addl. Chief Engineer (P)

Seal of company DGVCL, Surat.