REPAIRS TO JOINERY,CEILING AND ROOF TREATMENT AT INS DRONACHARYA AND MES COLONY AT FORT KOCHI UNDER GE FORT KOCHI

Amount

Dismantling asbestose cement corrugated or semi corrugated sheet in roof covering, wall cladding etc, all as specified and directed.

Dismantling boarding any description fixed in any position with nails (wood work) all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed.

Dismantling wrought iron or mild steel work of any description all as specified and as directed.

Taking down existing treatment from the roof including APP Membrane,H P Clay tiles , cement plaster removing the debris off the premises and cleaning the roof complete all as specified and directed.

M & L Second class hardwood weather boarding wrought both sides 25 mm thick and edges shot and chemfered all as specified and as directed.

S&F PVC Eaves Gutter heavy duty half round 200 mm dia including taking down of old gutter all as specified and directed.

M&L bands, straps , supports or stays for rainwater, ventilating pipes , including bolts ,if required , hooks (stay) , heavy , for large gates, hook and pintle hinges , large hasps and staples , chains , hand made sliding bolts , clamps , hold fasts , wall ties , hooks for hanging fans , plain angle cleat for securing purlins to wood trusses or rafters , knee piece inserts , two way and three way straps , plate washers and similar small articles all as specified and directed..

M/L for 6mm thick asbestose cement corrugated or semi corrugated sheets as in roof/wall cladding fixed with 'L' or 'J' type or cranked hook bolt all as specified and directed.

M/L for asbestos cement two piece adjustable plain wing unserrated ridge 6mm thick fixed with L or J type or crancked hook bolt all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screwsas specified and directed

S/F MS gusset plate (Plain or chequered) chennels, square, cut or notched (Ordinary and counter sunk) forming holes, with rivited, bolted or welded attachment incl necessary welding all as specified and as directed.

S&F steel work in tubular trusses including (purlins and rafters) special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Gde St-240 all as specified and directed.

M&L for preparation of new steel surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L for preparation of new steel surfaces,not exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L for roughening old concrete surface of roof by picking, sweeping clean and washing down with water to remove weak concrete/plaster dust etc all as specified and directed

M&L cement concrete, 40 mm thick, type B0, 1:2:4 (12.50 mm graded stone aggregate) as in concrete padding on roof surfaces complete all as specified and directed

M&L for rendering cement plaster over roof slab with CM 1:3, 10 mm thick mixed with water proofing compound, all as specified and directed Note:- WPC shall be measured and paid separately.

M&L for applying oil based bitumen primer @ 0.20 Kg/Sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4.00 Kg/Sqm reinforced with one woven polyester mat weighing not less 160g/Sqm having softening point not less than 140 degree centigrade longitudinal tensile strength not less than 650 N/5 cm, tearing strength of 180 N torch application including minimum 10 cm side over lap & 15 cm end overlap, (applying a coat of blown grade hot bitumen 90/15 over membrance @ 1.2 Kg/Sqm) and applying bituminous aluminium paint @ 100 gm/Sqm all as specified and directed. Note : Height of building upto 15.00 mtr from ground level.

Supply only Liquid water proofing compound.

M&L chipping and removing all damaged and debonded plaster from ceiling of RCC slab by manually or mechanically and cleaning the surface with water ,removing debris from the premises and plastering with cement mortar 1:3 on ceiling,specified and as directed by Engineer In Charge.

-' Ditto- all as per item No 22 above but of Chajjas,roof projection and like on high rise buildings including scaffolding ,formwork etc

M&L for prepration of new treated surface of Ceiling and applying three coats of white wash all as specified and directed.

M&L in 9 mm thick pre-laminated particle board exterior grade , prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in aluminium frame work complete all as specified and directed by Engineer-In -charge

Taking down chowkats or frames with shutters (with out taking off shutters from frame) n exc 1.5 sqm each and making good the damaged surface to its original specification to the entire satisfaction of Engineer- In -Charge.

Taking down chowkats or frames with shutters (with out taking off shutters from frame) exc 1.5 sqm but n.exc 4sqm each and making good the damaged surface to its original specification to the entire satisfaction of Engineer- In -Charge.

Taking down shutters of any description exc 1.0 sqm but n.exc. 2.0 sqm each and making good the damaged surface to its original specification to the entire satisfaction of Engineer- In -Charge.

Taking down shutters of any description n.exc. 1 sqm each

Taking down aluminium frames with shutters (with out taking off shutters from frame) n exc 1.5 sqm each

Taking down aluminium frames with shutters (with out taking off shutters from frame) exc 1.5 sqm but n.exc 4sqm each

Taking down aluminium shutters of any description exc 1.0 sqm but n.exc. 2.0 sqm each and making good the damaged surface to its original specification to the entire satisfaction of Engineer- In -Charge.

Taking down aluminium shutters of any description n.exc. 1 sqm each and making good the damaged surface to its original specification to the entire satisfaction of Engineer- In -Charge.

Supply and fix Aluminium windows casement type (34 mm Series) powder coated aluminium sections with and including 5 mm thick plain sheet glass panes of openable type with rubber lining, Casement type (34 mm Series) sections for mosquito proofing windows with aluminium alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40 mm in three panes divided with mullion section sash bars and aluminium standard decco grills 10 mm thick, fixed in with 1.3 mm thick standard aluminium "F" channels etc complete with following sections of HINDALCO or equivalent. (a) "H" frame 44.50 x 34.00 x 2.00 mm Section No 2082 (b) "Z" shutter 34.00 x 44.50 x 2.00 mm Section No 4124 (c) Mullion 57.00 x 34.00 x 25.00 mm Section No 9139 Note:- The rates are inclussive of SS friction hinges grade 304(Eye Max) for aluminium windows , jointing cleats, rubber beading, "U" channels, handles, locking arrangements etc. complete all as specified and directed.

M&L for powder coated aluminium windows / ventilators sliding, with aluminium standard decco grills 10 mm thick ,with section Nos 4095 ,4096 for frame and section Nos 4148, 9777 and 9778 for shutter with super sliding , glazed with 5 mm thick sheet glass, including necessary rubber beading, locking arrangements etc.complete all as specified and directed.

M&L for powder coated aluminium frame , shutters & sections for doors , ventilators ,Cup boards ,partitions ,including necessary rubber beading, locking arrangements etc. complete .

S&F Stainless steel eye max hinges,grade 202 , including taking down old u/s hinges complete all as specified,

S&F Second class plain, solid, straight chowkats and frames, wrought, frames, rebated on the solid, put together, glued at joints complete all as specified.

S&F second class HW 35 mm thick plain framed panelled shutters (any number of panels ) with panels of timber flat on both sides (feather edge) or medium density,exterior grade marine ply wood 9mm thick supplied and fitted to chowkats complete all as specified.

S&F second class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive glass, gauze , etc.(without sash bars) , edge of framing plain, chamfered or rounded , fitted with cut and miterd beads for securing glass , etc sizes of members of shutters as specified in SSR Part I , Section 8 , clause 8.24 (a) supplied and fitted to chowkats complete all as specified.

S&F second class hard wood 30 mm thick glazed and skelton shutters open rebated and prepared to receive glass, gauze , etc.(without sash bars) , edge of framing plain, chamfered or rounded , fitted with cut and miterd beads for securing glass , etc sizes of members of shutters as specified in SSR Part I , Section 8 , clause 8.24 (b) supplied and fitted to chowkats all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in bed blocks for fixing hold fasts complete all as specified

Preparation of new or previously un-treated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified.

M&L treating with tar or coal tar for hold fasts area n.exc 0.1 sqm each complete all as specified.

M & L for preparing surfaces of wood and wood based material of any description and girth ,not otherwise described and treated with tar or coal tar complete all as specified

S&F aluminium wire mesh fix to wood / aluminium frames complete all as specified.

S&F aluminium wire mesh fix to wood / aluminium frames including taking out old damaged aluminium wire cloth complete all as specified.

S&F 4 mm thick , sheet glass , ordinary quality in each pane fixed to Wooden/aluminium ,frames complete all as specified.

S&F 4 mm thick , sheet glass , ordinary quality in each pane fixed to Wooden/aluminium/steel frames including hacking out old brocken glass (any thickness,size ,quality or description) including putty,beeding ,screws complete all as specified.

S&F 4 mm thick , sheet glass , ground or obscured or frosted , on one side in each pane fixed to aluminium windows/ventilators or in partations complete all as specified.

S&F stainless steel butt hinge 125 mm medium weight complete all as specified.

S&F stainless steel butt hinge 100 mm medium weight complete all as specified.

S&F 150 mm aluminium anodised barrel tower bolt of extruded section complete all as specified.

S&F 100 mm aluminium anodised barrel tower bolt of extruded section complete all as specified.

S&F 150 mm extruded aluminium anodised handles complete all as specified.

S&F 100 mm extruded aluminium anodised handles complete all as specified.

S&F 300 mm anodised aluminium sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolts etc complete complete all as specified.

S&F 150 mm floor door stopper with aluminium alloy body and tongue with hard drawn steel spring complete all as specified.

S&F in repairs 150 mm floor door stopper with aluminium alloy body and tongue with hard drawn steel spring complete all as specified.

S & F 150 mm aluminium hooks and Eyes for window shutters complete all as specified.

S&F 125mm aluminium anodised hasp and staple complete all as specified.

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick Aluminium alloy sheet foundation box, main body with SS cover, governing pivot made of brass, other parts made of MS heavy duty fixed,complete all as specified and as directed by Engr-In-Charge

S & F door closer hydraulically regulated ,cast iron body, designation No -3,universal type ,suitable for door shutters of 851 to 1000 mm in width and of wt between 61 to 80 Kg and fixed complete all as specified.

S & F in repairs door closer hydraulically regulated ,cast iron body, designation No -3,universal type ,suitable for door shutters of 851 to 1000 mm in width and of wt between 61 to 80 Kg and fixed complete all as specified.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded wood grain printed colour PVC 'C' channel having a PVC sheet strip of 20mm width suck inside with solvent cement for tiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail& bottom rail; Paneling of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame and 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x10 mm (90 degree) used instead of exposed portion of PVC sheet beading as per specification ( including supply and fixing of fittings like PVC bow handles (150mm -2 Nos) ,sliding door bolts (200mm -1Nos), tower bolts (150mm -2Nos) etc complete all as specified.

S&F solid PVC door frame of size 50mm x47 mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheets reinforced with MS square tube, supplying and fixing in opening as per specification including fixing of fittings like hinges, holdfast etc complete all as specified.

Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc(for receiving skirting tiles ) complete all as specified.

M&L for plastering in cement mortar 10mm thick 1:6 on concrete or brick surfaces of wall and finished even and smooth without using extra cement.

M&L for prepration of new treated surface of wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls and applying one coat of distemper oil emulsion all as specified and directed.

S&F in repairs 12 mm thick toughened glass door ,spring loaded with aluminium frame .etching on glass surfaces ,including locking arrangements , SS handles ,with all accessories complete all as specified

M&L easing of eye max hinges of any size with grease and oil fixed with aluminium windows & ventilators at any height complete all as specified

M&L in repairs 18 mm thick medium dencity fibre board,exterior grade ,fixed to timber frame work with screws complete all as specified

M&L for Sealant for filling the gap between walls and aluminium frames complete all as specifed

ZOOM ENTERPRISES

KENZ CONSTRUCTIONS

K R JOSEPH AND SONS